Investigation and Comparison of Using SVC, STATCOM and DBR’s Impact on Wind Farm Integration

M. SEDİGHİZADEH; M. M. HOSSEİNİ

Makale detayları

Investigation and Comparison of Using SVC, STATCOM and DBR’s Impact on Wind Farm Integration

Yazarlar:

M. SEDİGHİZADEH | M. M. HOSSEİNİ

Yayıncı:

Akdeniz University

Dergi:

International Journal of Engineering and Applied Sciences 2010 Vol.2 Issue 4, pp.38-54

Belge Tipi:

Makale

Yayın Tarihi:

11/2010

Belge Dili:

Türkçe

Document ID (Org No.):

2000459889

Sıklık:

Üç Aylık

eISSN:

1309-0267

Özet:

 

This research studies stability of wind farms based on Fixed Speed Induction Generators (FSIG). It also investigates the effects of using SVC, STATCOM or DBR (Dynamic Resistance Braking) on wind farms stability. Because of the asynchronous operation nature, system instability of wind farms based on FSIG is largely caused by the reactive power absorption by FSIG due to the large rotor slip during fault. In this paper, a model of wind farm based on FSIG, equipped with SVC, STATCOM or DBR is developed in MATLAB/SIMULINK and then results of system simulation with these devices are compared. Finally for additional investigations and comparisons about the impact of these devices on wind farm stability, some studies are conducted on the system in different conditions and with various variables like: nominal power of the used devices, the X/R ratio of transmission line, nominal power of wind farm, wind speed and short circuit power of the network. Results of the simulation illustrate that, these devices considerably improve wind farm stability. However after considering all aspects and simulation results, In comparison with SVC and DBR, due to its dynamic performance and better reactive power support, STATCOM is the best choice for increasing stability of network connected wind farms.

Makale detayları

Investigation and Comparison of Using SVC, STATCOM and DBR’s Impact on Wind Farm Integration

Yazarlar: M. SEDİGHİZADEH | M. M. HOSSEİNİ

Yayıncı: Akdeniz University

Dergi: International Journal of Engineering and Applied Sciences 2010 Vol.2 Issue 4, pp.38-54

Belge Tipi: Makale

Yayın Tarihi: 11/2010

Belge Dili: Türkçe

Document ID (Org No.): 2000459889

Sıklık: Üç Aylık

eISSN: 1309-0267

Sayı

Yazarlar:

M. SEDİGHİZADEH | M. M. HOSSEİNİ

Yayıncı:

Akdeniz University

Dergi:

International Journal of Engineering and Applied Sciences 2010 Vol.2 Issue 4, pp.38-54

Belge Tipi:

Makale

Yayın Tarihi:

11/2010

Belge Dili:

Türkçe

Document ID (Org No.):

2000459889

Sıklık:

Üç Aylık

eISSN:

1309-0267