Effect of Tea Tree Oil on Candida Albicans Retention of CAD-CAM and Conventional Acrylic Resins

Seda Üstün Aladağ; Elif Aydoğan Ayaz

Makale detayları

Effect of Tea Tree Oil on Candida Albicans Retention of CAD-CAM and Conventional Acrylic Resins

Yazarlar:

Seda Üstün Aladağ | Elif Aydoğan Ayaz

Yayıncı:

Necmettin Erbakan University

Ana Başlıklar:

Protez

Dergi:

Necmettin Erbakan Üniversitesi Diş Hekimliği Dergisi Vol.5 Issue 3, pp.179-187

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001307260

pISSN:

2687-5535

Anahtar kelimeler:

Özet:

 Aim: To evaluate the effect of cleansing tablet COR and tea tree oil CY solutions on the formation of Candida albicans on heat-polymerized polymethyl methacrylate PMMA and Computer-aided design and manufacturing CAD-CAM millable PMMA surfaces. Material and Methods: 60 samples were prepared using heat-polymerized PMMA and CAD-CAM PMMA. The samples kept in artifi-cial saliva at neutral pH at room temperature for 24 hours. Candida albicans was grown by incubating on sabouraud dextrose agar at 37C for 48 hours. After the microorganism cultivation, the samples were divided into 3 subgroups and kept in distilled water K, COR and CY solutions n10. COR and CY samples were kept in solutions for 5 minutes. Counting of colonies was completed on the last solution. Calculation was made with the Colony Forming Unit formula. Shapiro-Wilk, Two-way analysis of variance ANOVA and Bonferroni tests were used for data analysis P0.05. Results: According to the colony count, the highest mean value was seen in the K group of heat-polymerized PMMA, followed by the COR group. The lowest mean value was observed in the CY group of CAD-CAM PMMA. Colony formation was significantly less in the CY group of heat-polymerized PMMA compared to the K and COR groups P0.05. Conclusion: Since colony formation is less on the CAD-CAM PMMA surface, it can be used especially in individuals prone to denture stomatitis. Solutions prepared with COR or CY can reduce colony formation on denture surfaces.

 Aim: To evaluate the effect of cleansing tablet COR and tea tree oil CY solutions on the formation of Candida albicans on heat-polymerized polymethyl methacrylate PMMA and Computer-aided design and manufacturing CAD-CAM millable PMMA surfaces. Material and Methods: 60 samples were prepared using heat-polymerized PMMA and CAD-CAM PMMA. The samples kept in artifi-cial saliva at neutral pH at room temperature for 24 hours. Candida albicans was grown by incubating on sabouraud dextrose agar at 37C for 48 hours. After the microorganism cultivation, the samples were divided into 3 subgroups and kept in distilled water K, COR and CY solutions n10. COR and CY samples were kept in solutions for 5 minutes. Counting of colonies was completed on the last solution. Calculation was made with the Colony Forming Unit formula. Shapiro-Wilk, Two-way analysis of variance ANOVA and Bonferroni tests were used for data analysis P0.05. Results: According to the colony count, the highest mean value was seen in the K group of heat-polymerized PMMA, followed by the COR group. The lowest mean value was observed in the CY group of CAD-CAM PMMA. Colony formation was significantly less in the CY group of heat-polymerized PMMA compared to the K and COR groups P0.05. Conclusion: Since colony formation is less on the CAD-CAM PMMA surface, it can be used especially in individuals prone to denture stomatitis. Solutions prepared with COR or CY can reduce colony formation on denture surfaces.

 Aim: To evaluate the effect of cleansing tablet COR and tea tree oil CY solutions on the formation of Candida albicans on heat-polymerized polymethyl methacrylate PMMA and Computer-aided design and manufacturing CAD-CAM millable PMMA surfaces. Material and Methods: 60 samples were prepared using heat-polymerized PMMA and CAD-CAM PMMA. The samples kept in artifi-cial saliva at neutral pH at room temperature for 24 hours. Candida albicans was grown by incubating on sabouraud dextrose agar at 37C for 48 hours. After the microorganism cultivation, the samples were divided into 3 subgroups and kept in distilled water K, COR and CY solutions n10. COR and CY samples were kept in solutions for 5 minutes. Counting of colonies was completed on the last solution. Calculation was made with the Colony Forming Unit formula. Shapiro-Wilk, Two-way analysis of variance ANOVA and Bonferroni tests were used for data analysis P0.05. Results: According to the colony count, the highest mean value was seen in the K group of heat-polymerized PMMA, followed by the COR group. The lowest mean value was observed in the CY group of CAD-CAM PMMA. Colony formation was significantly less in the CY group of heat-polymerized PMMA compared to the K and COR groups P0.05. Conclusion: Since colony formation is less on the CAD-CAM PMMA surface, it can be used especially in individuals prone to denture stomatitis. Solutions prepared with COR or CY can reduce colony formation on denture surfaces.

 Amaç: Isı ile polimerize polimetil metakrilat PMMA ve bilgisayar destekli tasarım ve üretim CAD-CAM ile millenebilen PMMA yüzeylerinde Candida albicans oluşumuna, temizleme tableti COR ve çay ağacı yağı CY solüsyonlarının etkisini değerlendirmektir. Gereç ve Yöntemler: Isı ile polimerize PMMA ve CAD-CAM PMMA kullanılarak 60 adet örnek hazırlandı. Örnekler oda sıcaklığında nötr pHtaki yapay tükürükte 24 saat bekletildi. Candida albicans sabouraud dekstroz agarda 37de 48 saat inkübe edilip çoğaltıldı. Örnekler mikroorganizma ekiminin ardından, distile suda K, COR ve CY solüsyonlarında bekletilmek üzere 3 alt gruba ayrıldı n10. COR ve CY örnekleri solüsyonlarda 5 dakika bekletildi. Son solüsyon üzerinden kolonilerin sayımı tamamlandı. Colony Forming Unit formülüyle hesaplama yapıldı. Verilerin analizinde Shapiro-Wilk, İki yönlü varyans analizi ANOVA ve Bonferroni testleri kullanıldı P0.05. Bulgular: Koloni sayımına göre en yüksek ortalama değer ısı ile polimerize PMMAya ait K grubunda, ardından COR grubunda görüldü. En düşük ortalama değer CAD-CAM PMMAya ait CY grubunda izlendi. Isı ile polimerize PMMAya ait CY grubunda koloni oluşumu, K ve COR grubuna kıyasla anlamlı düzeyde daha azdı P0.05. Sonuç: CAD-CAM PMMA yüzeyinde koloni oluşumu daha az olduğundan özellikle protez stomatitine yatkın bireylerde kullanılabilir. Protez yüzeylerinde koloni oluşumunu COR veya CY ile hazırlanmış solüsyonlar azaltabilir. CY solüsyonları protez temizliğinde doğal bir yöntem olarak tercih edilebilir.

Makale detayları

Effect of Tea Tree Oil on Candida Albicans Retention of CAD-CAM and Conventional Acrylic Resins

Yazarlar:

Seda Üstün Aladağ | Elif Aydoğan Ayaz

Yayıncı:

Necmettin Erbakan University

Ana Başlıklar:

Protez

Dergi:

Necmettin Erbakan Üniversitesi Diş Hekimliği Dergisi Vol.5 Issue 3, pp.179-187

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001307260

pISSN:

2687-5535

Computer-aided design

Polymethyl methacrylate

Candida albicans

Tea tree oilBilgisayar yardımlı tasarım

Polimetil metakrilat

Candida albicans

Çay ağacı yağı

Sayı

Makale detayları

Yazarlar: Seda Üstün Aladağ | Elif Aydoğan Ayaz

Yayıncı: Necmettin Erbakan University

Ana Başlıklar: Protez

Dergi: Necmettin Erbakan Üniversitesi Diş Hekimliği Dergisi Vol.5 Issue 3, pp.179-187

Belge Tipi: Makale

Yayın Tarihi: 12/2023

Belge Dili: Türkçe

Document ID (Org No.): 2001307260

pISSN: 2687-5535

Sayı

Yazarlar:

Seda Üstün Aladağ | Elif Aydoğan Ayaz

Yayıncı:

Necmettin Erbakan University

Ana Başlıklar:

Protez

Dergi:

Necmettin Erbakan Üniversitesi Diş Hekimliği Dergisi Vol.5 Issue 3, pp.179-187

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001307260

pISSN:

2687-5535