Investigation Of The Material Density Of Formaldehyde-Free Wood-Based Composite Board Within The Framework Of Eco-Design Approaches

Yusuf Alperen Şişman; Hamza Çınar

Makale detayları

Investigation Of The Material Density Of Formaldehyde-Free Wood-Based Composite Board Within The Framework Of Eco-Design Approaches

Yazarlar:

Yusuf Alperen Şişman | Hamza Çınar

Yayıncı:

Cankiri Karatekin University

Ana Başlıklar:

Composite and Hybrid Materials | Material Production Technologies

Dergi:

Alpha Journal of Engineering and Applied Sciences Vol.1 Issue 1, pp.28-40

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001308880

pISSN:

3023-6002

Anahtar kelimeler:

Özet:

 This research aims to produce formaldehyde-free wood-based boards, and the density properties of the produced boards with standard particle boards were investigated. Three types of main additives Baklava flour, Corn Starch and Corn Flour and salep were used in the production of the board, and egg whites were used as binding material. In order to find the densities of 60 pieces of 505010 mm test samples obtained from the plates produced for this purpose, tests were carried out according to the principles specified in TS EN 323 1999. According to the results, the most efficient result was obtained in the plates obtained by using corn flour. the highest dry density value 0.695 gcm³ was reached in the plates obtained by using 7.5 gr sahlep and corn flour 125 gr. For the air-dry density values, the highest value 0.724 gcm³ was obtained in the mixture of 7.5 g sahlep and corn flour 125 g. As a result of the research, a formaldehyde-free wood-based panel with a density of 0.695 gcm³ was produced, which can meet the expectations of the furniture sector, and it was found that it has properties equivalent to standard particleboard formaldehyde-added density 0.64 gcm³.

 This research aims to produce formaldehyde-free wood-based boards, and the density properties of the produced boards with standard particle boards were investigated. Three types of main additives Baklava flour, Corn Starch and Corn Flour and salep were used in the production of the board, and egg whites were used as binding material. In order to find the densities of 60 pieces of 505010 mm test samples obtained from the plates produced for this purpose, tests were carried out according to the principles specified in TS EN 323 1999. According to the results, the most efficient result was obtained in the plates obtained by using corn flour. the highest dry density value 0.695 gcm³ was reached in the plates obtained by using 7.5 gr sahlep and corn flour 125 gr. For the air-dry density values, the highest value 0.724 gcm³ was obtained in the mixture of 7.5 g sahlep and corn flour 125 g. As a result of the research, a formaldehyde-free wood-based panel with a density of 0.695 gcm³ was produced, which can meet the expectations of the furniture sector, and it was found that it has properties equivalent to standard particleboard formaldehyde-added density 0.64 gcm³.

 This research aims to produce formaldehyde-free wood-based boards, and the density properties of the produced boards with standard particle boards were investigated. Three types of main additives Baklava flour, Corn Starch and Corn Flour and salep were used in the production of the board, and egg whites were used as binding material. In order to find the densities of 60 pieces of 505010 mm test samples obtained from the plates produced for this purpose, tests were carried out according to the principles specified in TS EN 323 1999. According to the results, the most efficient result was obtained in the plates obtained by using corn flour. the highest dry density value 0.695 gcm³ was reached in the plates obtained by using 7.5 gr sahlep and corn flour 125 gr. For the air-dry density values, the highest value 0.724 gcm³ was obtained in the mixture of 7.5 g sahlep and corn flour 125 g. As a result of the research, a formaldehyde-free wood-based panel with a density of 0.695 gcm³ was produced, which can meet the expectations of the furniture sector, and it was found that it has properties equivalent to standard particleboard formaldehyde-added density 0.64 gcm³.

 Bu araştırmada, formaldehit içermeyen ahşap esaslı levha üretimi amaç edinilmiş, üretilen levhaların standart yonga levhalar ile yoğunluk özellikleri incelenmiştir. Levha üretiminde 3 çeşit ana katkı maddesi Baklava unu, Mısır Nişastası ve Mısır Unu ve salep, bağlayıcı madde olarak da yumurta akı kullanılmıştır. Bu amaca yönelik üretilen levhalardan elde edilmiş 60 adet 505010 mm deney numunelerinin yoğunluklarını bulmak için TS EN 323 1999 da belirtilmiş olan esaslara göre testler yapılmıştır. Yapılan çalışma sonucuna göre mısır unu kullanılarak elde edilen levhalarda en verimli sonucun elde edildiği görülmüştür. Bu sonuçlara göre, 7,5 gr salep ve mısır unu 125 gr kullanılarak elde edilen levhalarda en yüksek tam kuru yoğunluk değerine 0,695 gcm³  ulaşıldığı görülmüştür. Aynı şekilde hava kurusu yoğunluk değerlerine bakıldığında en fazla değerin 7,5 gr salep ve mısır unu 125 gr karışımında en yüksek değere 0,724 gcm³ ulaşıldığı tespit edilmiştir. Araştırma sonucunda; mobilya sektörünün beklentilerine cevap verebilecek nitelikte formaldehit içermeyen ahşap esaslı kompozit levha yoğunluğu 0,695 gcm³ olarak üretilmiş, standart yonga levha formaldehit katkılı yoğunluğu ile 0,64 gcm³ eş değer özelliklere sahip olduğu tespit edilmiştir.

Makale detayları

Investigation Of The Material Density Of Formaldehyde-Free Wood-Based Composite Board Within The Framework Of Eco-Design Approaches

Yazarlar:

Yusuf Alperen Şişman | Hamza Çınar

Yayıncı:

Cankiri Karatekin University

Ana Başlıklar:

Composite and Hybrid Materials | Material Production Technologies

Dergi:

Alpha Journal of Engineering and Applied Sciences Vol.1 Issue 1, pp.28-40

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001308880

pISSN:

3023-6002

Formaldehyde

Sahlep

Flour

Wood Based Composite BoardFormaldehit

Salep

Un

Ahşap Esaslı Kompozit Levha

Sayı

Makale detayları

Yazarlar: Yusuf Alperen Şişman | Hamza Çınar

Yayıncı: Cankiri Karatekin University

Ana Başlıklar: Composite and Hybrid Materials | Material Production Technologies

Dergi: Alpha Journal of Engineering and Applied Sciences Vol.1 Issue 1, pp.28-40

Belge Tipi: Makale

Yayın Tarihi: 12/2023

Belge Dili: Türkçe

Document ID (Org No.): 2001308880

pISSN: 3023-6002

Sayı

Yazarlar:

Yusuf Alperen Şişman | Hamza Çınar

Yayıncı:

Cankiri Karatekin University

Ana Başlıklar:

Composite and Hybrid Materials | Material Production Technologies

Dergi:

Alpha Journal of Engineering and Applied Sciences Vol.1 Issue 1, pp.28-40

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001308880

pISSN:

3023-6002