Farklı Özellikteki Malzemelerin Tozaltı Ark Kaynak Yöntemi ile Birleştirilmesi ve Birleştirmelerin Tahribatlı ve Tahribatsız Muayenesi

Yakup Kaya; Nizamettin Kahraman

Makale detayları

Farklı Özellikteki Malzemelerin Tozaltı Ark Kaynak Yöntemi ile Birleştirilmesi ve Birleştirmelerin Tahribatlı ve Tahribatsız Muayenesi

Yazarlar:

Yakup Kaya | Nizamettin Kahraman

Ana Başlıklar:

Uygulamalı fizik

Dergi:

Sakarya University Journal of Science 2013 Vol.17 Issue 1, pp.85-96

Belge Tipi:

Makale

Yayın Tarihi:

3/2013

Belge Dili:

Türkçe

Document ID (Org No.):

2000558956

Özet:

 

In this study, X60, X65 and X70 steels used in petroleum and natural gas pipeline were joined with Submerged Arc Welding by using different type of welding fluxes (LN761 and P223) and wires (S1 and S2Mo). Initially, visual and radiographic inspection techniques were subjected to welded joints for determining surface and subsurface defects. After that, spectral analyses were carried out in order to determine the compositions of wire-flux-base metal on the joints. Impact toughness test were performed for determining toughness properties the joints. Furthermore, hardness and microstructure studies were also * Sorumlu Yazar / Corresponding Authorcarried out on the samples. As a result of the visual and radiographic inspection on the welded samples, there were no weld defects on joints were observed. It was clearly understood that carbon ratio in the compositions of weld metal higher than base metal but lower than filler metal in terms of spectral analyses results. According to impact toughness test results, the joints obtained by using S2Mo welding wire and P223 welding flux had better impact toughness value than the joints obtained by S1 welding wire and LN 761 welding flux. With respect to hardness test, the highest hardness values were measured on weld metal. When the microstructure images were examined, it is clearly understood that similar images for all the joints were shown adjacent zones to weld metals heat affected zones and welding boundary, due to heat input constant.

 

In this study, X60, X65 and X70 steels used in petroleum and natural gas pipeline were joined with Submerged Arc Welding by using different type of welding fluxes (LN761 and P223) and wires (S1 and S2Mo). Initially, visual and radiographic inspection techniques were subjected to welded joints for determining surface and subsurface defects. After that, spectral analyses were carried out in order to determine the compositions of wire-flux-base metal on the joints. Impact toughness test were performed for determining toughness properties the joints. Furthermore, hardness and microstructure studies were also carried out on the samples. As a result of the visual and radiographic inspection on the welded samples, there were no weld defects on joints were observed. It was clearly understood that carbon ratio in the compositions of weld metal higher than base metal but lower than filler metal in terms of spectral analyses results. According to impact toughness test results, the joints obtained by using S2Mo welding wire and P223 welding flux had better impact toughness value than the joints obtained by S1 welding wire and LN 761 welding flux. With respect to hardness test, the highest hardness values were measured on weld metal. When the microstructure images were examined, it is clearly understood that similar images for all the joints were shown adjacent zones to weld metals heat affected zones and welding boundary, due to heat input constant.

Makale detayları

Farklı Özellikteki Malzemelerin Tozaltı Ark Kaynak Yöntemi ile Birleştirilmesi ve Birleştirmelerin Tahribatlı ve Tahribatsız Muayenesi

Yazarlar: Yakup Kaya | Nizamettin Kahraman

Ana Başlıklar: Uygulamalı fizik

Dergi: Sakarya University Journal of Science 2013 Vol.17 Issue 1, pp.85-96

Belge Tipi: Makale

Yayın Tarihi: 3/2013

Belge Dili: Türkçe

Document ID (Org No.): 2000558956

Sayı

Yazarlar:

Yakup Kaya | Nizamettin Kahraman

Ana Başlıklar:

Uygulamalı fizik

Dergi:

Sakarya University Journal of Science 2013 Vol.17 Issue 1, pp.85-96

Belge Tipi:

Makale

Yayın Tarihi:

3/2013

Belge Dili:

Türkçe

Document ID (Org No.):

2000558956