THE EFFECT OF FINISHING AND POLISHING SYSTEMS ON THE SURFACE ROUGHNESS OF INDIRECT COMPOSITE RESINS

Hasibe Sevilay Bahadır; İrem Çetinbak; Selin Polatoğlu; Çiğdem Çelik

Makale detayları

THE EFFECT OF FINISHING AND POLISHING SYSTEMS ON THE SURFACE ROUGHNESS OF INDIRECT COMPOSITE RESINS

Yazarlar:

Hasibe Sevilay Bahadır | İrem Çetinbak | Selin Polatoğlu | Çiğdem Çelik

Yayıncı:

Istanbul University

Ana Başlıklar:

Clinical Sciences (Other)

Dergi:

Journal of Advanced Research in Health Sciences Vol.6 Issue 3, pp.317-322

Belge Tipi:

Makale

Yayın Tarihi:

10/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001311835

pISSN:

2651-4060

Anahtar kelimeler:

Özet:

 Objective: The aim of this study was to evaluate the effects of different types of finishing and polishing systems on the surface roughness of indirect composite resins. Materials and Methods: In this study, 2 indirect composite resins Gradia Plus GC Inc., Kyoto, Japan, and Ceramage, SHOFU Inc., Kyoto, Japan and 2 direct composite resins FiltekZ250, 3M ESPE, St. Paul, USA and GradioSO, VOCO GmbH, Cuxhaven, Germany were used. A total of 144 discs specimens were prepared. The specimens were randomly divided into 3 subgroups n12. Group K: Mylar Strip Band Control, Group L: Silicone Polisher Nais, Sofia, Bulgaria, Group D: Super Snap disc SHOFU, Kyoto, Japan polishing systems were used. The surface roughness of the specimens was measured using a profilometer Surftest-211, Kanagawa, Japan. The data were analyzed statistically p0.05. Results: The Mylar strip band surface control was measured as the smoothest surface in all groups. While the roughest surface measured was polishing with silicone polishers. p0.05. While there is no significant statistical difference between the Mylar strip band and yellow rubber polishing system in all materials, a significant difference was found in the Super Snap polishing disc system between Filtek Z250 and Ceramage material p0.002. Conclusions: In this study, both the polishing systems used and the materials used had an effect on the surface roughness of indirect resin composites.

 Objective: The aim of this study was to evaluate the effects of different types of finishing and polishing systems on the surface roughness of indirect composite resins. Materials and Methods: In this study, 2 indirect composite resins Gradia Plus GC Inc., Kyoto, Japan, and Ceramage, SHOFU Inc., Kyoto, Japan and 2 direct composite resins FiltekZ250, 3M ESPE, St. Paul, USA and GradioSO, VOCO GmbH, Cuxhaven, Germany were used. A total of 144 discs specimens were prepared. The specimens were randomly divided into 3 subgroups n12. Group K: Mylar Strip Band Control, Group L: Silicone Polisher Nais, Sofia, Bulgaria, Group D: Super Snap disc SHOFU, Kyoto, Japan polishing systems were used. The surface roughness of the specimens was measured using a profilometer Surftest-211, Kanagawa, Japan. The data were analyzed statistically p0.05. Results: The Mylar strip band surface control was measured as the smoothest surface in all groups. While the roughest surface measured was polishing with silicone polishers. p0.05. While there is no significant statistical difference between the Mylar strip band and yellow rubber polishing system in all materials, a significant difference was found in the Super Snap polishing disc system between Filtek Z250 and Ceramage material p0.002. Conclusions: In this study, both the polishing systems used and the materials used had an effect on the surface roughness of indirect resin composites.

 Objective: The aim of this study was to evaluate the effects of different types of finishing and polishing systems on the surface roughness of indirect composite resins. Materials and Methods: In this study, 2 indirect composite resins Gradia Plus GC Inc., Kyoto, Japan, and Ceramage, SHOFU Inc., Kyoto, Japan and 2 direct composite resins FiltekZ250, 3M ESPE, St. Paul, USA and GradioSO, VOCO GmbH, Cuxhaven, Germany were used. A total of 144 discs specimens were prepared. The specimens were randomly divided into 3 subgroups n12. Group K: Mylar Strip Band Control, Group L: Silicone Polisher Nais, Sofia, Bulgaria, Group D: Super Snap disc SHOFU, Kyoto, Japan polishing systems were used. The surface roughness of the specimens was measured using a profilometer Surftest-211, Kanagawa, Japan. The data were analyzed statistically p0.05. Results: The Mylar strip band surface control was measured as the smoothest surface in all groups. While the roughest surface measured was polishing with silicone polishers. p0.05. While there is no significant statistical difference between the Mylar strip band and yellow rubber polishing system in all materials, a significant difference was found in the Super Snap polishing disc system between Filtek Z250 and Ceramage material p0.002. Conclusions: In this study, both the polishing systems used and the materials used had an effect on the surface roughness of indirect resin composites.

 Amaç: Bu çalışmanın amacı; farklı tipteki bitirme ve cila sistemlerinin indirekt kompozit reçinelerin yüzey pürüzlülüğüne etkisini incelemektir. Gereç ve Yöntem: Bu çalışmada 2 indirekt kompozit rezin Gradia Plus, GC Inc., Kyoto, Japonya ve Ceramage SHOFU Inc., Kyoto, Japonya ve 2direkt kompozit rezin FiltekZ250 3M ESPE, St. Paul, ABD ve GradioSO VOCO GmbH, Cuxhaven, Almanya kullanılmıştır. Toplam 144 adet disk şeklinde örnek hazırlandı. Örnekler rastgele 3 alt gruba ayrıldı n12. Grup K: Mylar Strip Band Kontrol, Grup L: Silikon Parlatma Lastiği Nais, Sofia, Bulgaristan, Grup D: Super Snap disk SHOFU, Kyoto, Japonya polisaj sistemi kullanıldı. Örneklerin yüzey pürüzlülük ölçümü profilometre Surftest-211, Kanagava, Japonya kullanılarak ölçüldü. Elde edilen veriler istatistiksel olarak analiz edildi p0,05. Bulgular: Bütün gruplarda istatistiksel olarak anlamlı şekilde Mylar strip band altı yüzey kontrol en pürüzsüz yüzey olarak ölçülürken; en pürüzlü yüzey silikon parlatma lastiğiyle yapılan cilada ölçülmüştür. p0,05. Bütün materyallerde Mylar strip band ve silikon lastik cila sistemi arasında istatistiksel olarak anlamlı bir fark görülmezken; Filtek Z250 ve Ceramage materyali arasında Super Snap cila disk sisteminde anlamlı fark bulunmuştur p0,002. Sonuçlar: Bu çalışmada, indirekt kompozit reçinelerin yüzey pürüzlülüğüne hem kullanılan polisaj sistemlerinin hem de materyallerin etkisi olmuştur.

Makale detayları

THE EFFECT OF FINISHING AND POLISHING SYSTEMS ON THE SURFACE ROUGHNESS OF INDIRECT COMPOSITE RESINS

Yazarlar:

Hasibe Sevilay Bahadır | İrem Çetinbak | Selin Polatoğlu | Çiğdem Çelik

Yayıncı:

Istanbul University

Ana Başlıklar:

Clinical Sciences (Other)

Dergi:

Journal of Advanced Research in Health Sciences Vol.6 Issue 3, pp.317-322

Belge Tipi:

Makale

Yayın Tarihi:

10/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001311835

pISSN:

2651-4060

Indirect composite resin

polishing systems

surface roughnessİndirekt kompozit reçine

cila sistemleri

yüzey pürüzlülüğü

Sayı

Makale detayları

THE EFFECT OF FINISHING AND POLISHING SYSTEMS ON THE SURFACE ROUGHNESS OF INDIRECT COMPOSITE RESINS

Yazarlar: Hasibe Sevilay Bahadır | İrem Çetinbak | Selin Polatoğlu | Çiğdem Çelik

Yayıncı: Istanbul University

Ana Başlıklar: Clinical Sciences (Other)

Dergi: Journal of Advanced Research in Health Sciences Vol.6 Issue 3, pp.317-322

Belge Tipi: Makale

Yayın Tarihi: 10/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001311835

pISSN: 2651-4060

Indirect composite resin

polishing systems

surface roughnessİndirekt kompozit reçine

cila sistemleri

yüzey pürüzlülüğü

Sayı

Yazarlar:

Hasibe Sevilay Bahadır | İrem Çetinbak | Selin Polatoğlu | Çiğdem Çelik

Yayıncı:

Istanbul University

Ana Başlıklar:

Clinical Sciences (Other)

Dergi:

Journal of Advanced Research in Health Sciences Vol.6 Issue 3, pp.317-322

Belge Tipi:

Makale

Yayın Tarihi:

10/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001311835

pISSN:

2651-4060