Effects of Core and Surface Materials on the Flexural Behavior of Lightweight Composites Sandwich Beams

Zeki Özcan

Makale detayları

Effects of Core and Surface Materials on the Flexural Behavior of Lightweight Composites Sandwich Beams

Yazarlar:

Zeki Özcan

Yayıncı:

Duzce University

Ana Başlıklar:

İnşaat Yapım Mühendisliği | Yapı Malzemeleri | Yapı Mühendisliği

Dergi:

Düzce Üniversitesi Bilim ve Teknoloji Dergisi Vol.12 Issue 4, pp.2387-2399

Belge Tipi:

Makale

Yayın Tarihi:

10/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001329947

pISSN:

2148-2446

Anahtar kelimeler:

Özet:

 Sandwich composite elements are used in many sectors thanks to their low weightstrength ratios, high bending strength, good thermal insulation properties, and low costs. It is widely used in the machinery and construction industry, especially in land, sea, and air vehicles. The main objective of this research is to design and produce lightweight, durable, insulated, and low-cost, sustainable building elements that will meet emergency shelter needs after disasters. For housing purposes, 24 sandwich beams were prepared, eight designs with different surface coatings and core materials, and three in each design group. The effects of surface coating and core material on behavior were investigated with four-point bending experiments. Load-displacement relationships were determined from the experiments, and the beams load-carrying capacities and failure patterns under the effects of bending and shearing were determined. In addition, theoretical methods determined maximum load values and compared them with the results of the experiments. As a result of the experiments, it was concluded that the best-performing design under bending effects was sandwich beams with plywood surface and XPS core.

 Sandwich composite elements are used in many sectors thanks to their low weightstrength ratios, high bending strength, good thermal insulation properties, and low costs. It is widely used in the machinery and construction industry, especially in land, sea, and air vehicles. The main objective of this research is to design and produce lightweight, durable, insulated, and low-cost, sustainable building elements that will meet emergency shelter needs after disasters. For housing purposes, 24 sandwich beams were prepared, eight designs with different surface coatings and core materials, and three in each design group. The effects of surface coating and core material on behavior were investigated with four-point bending experiments. Load-displacement relationships were determined from the experiments, and the beams load-carrying capacities and failure patterns under the effects of bending and shearing were determined. In addition, theoretical methods determined maximum load values and compared them with the results of the experiments. As a result of the experiments, it was concluded that the best-performing design under bending effects was sandwich beams with plywood surface and XPS core.

 Sandwich composite elements are used in many sectors thanks to their low weightstrength ratios, high bending strength, good thermal insulation properties, and low costs. It is widely used in the machinery and construction industry, especially in land, sea, and air vehicles. The main objective of this research is to design and produce lightweight, durable, insulated, and low-cost, sustainable building elements that will meet emergency shelter needs after disasters. For housing purposes, 24 sandwich beams were prepared, eight designs with different surface coatings and core materials, and three in each design group. The effects of surface coating and core material on behavior were investigated with four-point bending experiments. Load-displacement relationships were determined from the experiments, and the beams load-carrying capacities and failure patterns under the effects of bending and shearing were determined. In addition, theoretical methods determined maximum load values and compared them with the results of the experiments. As a result of the experiments, it was concluded that the best-performing design under bending effects was sandwich beams with plywood surface and XPS core.

 Sandviç kompozit elemanlar düşük ağırlıkdayanım oranları, yüksek eğilme dayanımı, iyi ısı yalıtım özellikleri ve düşük maliyetleri sayesinde birçok sektörde kullanılmaktadır. Makine ve inşaat sektöründe, özellikle kara, deniz ve hava taşıtlarında yaygın olarak kullanılmaktadır. Bu araştırmanın temel amacı, afetlerden sonra acil barınma ihtiyaçlarını karşılamaya yönelik hafif, dayanıklı, yalıtımlı ve düşük maliyetli, sürdürülebilir yapı elemanları tasarlamaktır. Çalışmada, farklı yüzey kaplamaları ve çekirdek malzemelerine sahip sekiz tasarım ve her tasarım grubunda üç olmak üzere 24 sandviç kiriş hazırlanmıştır. Yüzey kaplaması ve çekirdek malzemesinin davranış üzerindeki etkileri dört noktalı eğilme deneyleriyle araştırılmıştır. Deneylerden yük-yer değiştirme ilişkileri belirlenmiş ve kirişlerin eğilme ve kesme etkileri altındaki yük taşıma kapasiteleri ve hasar desenleri belirlenmiştir. Ayrıca, teorik yöntemlerle maksimum yük değerleri belirlenmiş ve deneylerin sonuçlarıyla karşılaştırılmıştır. Deneyler sonucunda, eğilme etkileri altında en iyi performansı gösteren tasarımın kontrplak yüzeyli, XPS çekirdekli sandviç kirişler olduğu sonucuna varılmıştır.

Makale detayları

Effects of Core and Surface Materials on the Flexural Behavior of Lightweight Composites Sandwich Beams

Yazarlar:

Zeki Özcan

Yayıncı:

Duzce University

Ana Başlıklar:

İnşaat Yapım Mühendisliği | Yapı Malzemeleri | Yapı Mühendisliği

Dergi:

Düzce Üniversitesi Bilim ve Teknoloji Dergisi Vol.12 Issue 4, pp.2387-2399

Belge Tipi:

Makale

Yayın Tarihi:

10/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001329947

pISSN:

2148-2446

Sandwich composite

Four-point flexural test

Beam flexural strength

Flexural stiffness

EPS

XPS foamSandviç kompozit

Dört nokta eğilme testi

Kiriş eğilme dayanımı

Eğilme rijitliği

EPS

XPS köpük

Sayı

Makale detayları

Yazarlar: Zeki Özcan

Yayıncı: Duzce University

Ana Başlıklar: İnşaat Yapım Mühendisliği | Yapı Malzemeleri | Yapı Mühendisliği

Dergi: Düzce Üniversitesi Bilim ve Teknoloji Dergisi Vol.12 Issue 4, pp.2387-2399

Belge Tipi: Makale

Yayın Tarihi: 10/2024

Belge Dili: İngilizce

Document ID (Org No.): 2001329947

pISSN: 2148-2446

Sayı

Yazarlar:

Zeki Özcan

Yayıncı:

Duzce University

Ana Başlıklar:

İnşaat Yapım Mühendisliği | Yapı Malzemeleri | Yapı Mühendisliği

Dergi:

Düzce Üniversitesi Bilim ve Teknoloji Dergisi Vol.12 Issue 4, pp.2387-2399

Belge Tipi:

Makale

Yayın Tarihi:

10/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001329947

pISSN:

2148-2446