Experimental investigation of axial finned tube evaporator thermal distillation system using for diesel engine waste heat recovery process

Prakash Chandra

Makale detayları

Experimental investigation of axial finned tube evaporator thermal distillation system using for diesel engine waste heat recovery process

Yazarlar:

Prakash Chandra

Yayıncı:

Yildiz Technical University

Ana Başlıklar:

Thermodynamics and Statistical Physics

Dergi:

Journal of Thermal Engineering Vol.10 Issue 2, pp.479-489

Belge Tipi:

Makale

Yayın Tarihi:

3/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001313863

pISSN:

2148-7847

Anahtar kelimeler:

Özet:

 The study aims to improve the waste thermal energy retrieval from flue gas of an internal combustion engine ICE. The recovered waste heat energy was used for distillation by using a thermal distillation system. The performance of the thermal distillation unit was investigated by varying the evaporator boiler type and engine load 25, 50, 75 . Four different types of boilers were used including one smooth copper tube and other three were two, three and four axial finned copper tube evaporators. The impact of boiler type and engine load on the net retrieved energy and exergy, net energy and exergy efficiency, and distillate yield rate of thermal distillation unit was also examined. The results showed that the net extracted heat energy and exergy for axial finned tube evaporator was approximately 26.823  45.513  and 7.614  25.203 W higher than that of smooth tubes evaporator at 25 and 75  engine load, respectively. The distillation yield was found to be  2.35 liter hour in the case of four axial finned tube boiler at 75  engine load.

 The study aims to improve the waste thermal energy retrieval from flue gas of an internal combustion engine ICE. The recovered waste heat energy was used for distillation by using a thermal distillation system. The performance of the thermal distillation unit was investigated by varying the evaporator boiler type and engine load 25, 50, 75 . Four different types of boilers were used including one smooth copper tube and other three were two, three and four axial finned copper tube evaporators. The impact of boiler type and engine load on the net retrieved energy and exergy, net energy and exergy efficiency, and distillate yield rate of thermal distillation unit was also examined. The results showed that the net extracted heat energy and exergy for axial finned tube evaporator was approximately 26.823  45.513  and 7.614  25.203 W higher than that of smooth tubes evaporator at 25 and 75  engine load, respectively. The distillation yield was found to be  2.35 liter hour in the case of four axial finned tube boiler at 75  engine load.

 The study aims to improve the waste thermal energy retrieval from flue gas of an internal combustion engine ICE. The recovered waste heat energy was used for distillation by using a thermal distillation system. The performance of the thermal distillation unit was investigated by varying the evaporator boiler type and engine load 25, 50, 75 . Four different types of boilers were used including one smooth copper tube and other three were two, three and four axial finned copper tube evaporators. The impact of boiler type and engine load on the net retrieved energy and exergy, net energy and exergy efficiency, and distillate yield rate of thermal distillation unit was also examined. The results showed that the net extracted heat energy and exergy for axial finned tube evaporator was approximately 26.823  45.513  and 7.614  25.203 W higher than that of smooth tubes evaporator at 25 and 75  engine load, respectively. The distillation yield was found to be  2.35 liter hour in the case of four axial finned tube boiler at 75  engine load.

 The study aims to improve the waste thermal energy retrieval from flue gas of an internal combustion engine ICE. The recovered waste heat energy was used for distillation by using a thermal distillation system. The performance of the thermal distillation unit was investigated by varying the evaporator boiler type and engine load 25, 50, 75 . Four different types of boilers were used including one smooth copper tube and other three were two, three and four axial finned copper tube evaporators. The impact of boiler type and engine load on the net retrieved energy and exergy, net energy and exergy efficiency, and distillate yield rate of thermal distillation unit was also examined. The results showed that the net extracted heat energy and exergy for axial finned tube evaporator was approximately 26.823  45.513  and 7.614  25.203 W higher than that of smooth tubes evaporator at 25 and 75  engine load, respectively. The distillation yield was found to be  2.35 liter hour in the case of four axial finned tube boiler at 75  engine load.

Makale detayları

Experimental investigation of axial finned tube evaporator thermal distillation system using for diesel engine waste heat recovery process

Yazarlar:

Prakash Chandra

Yayıncı:

Yildiz Technical University

Ana Başlıklar:

Thermodynamics and Statistical Physics

Dergi:

Journal of Thermal Engineering Vol.10 Issue 2, pp.479-489

Belge Tipi:

Makale

Yayın Tarihi:

3/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001313863

pISSN:

2148-7847

Axial Finned Tube Evaporator

Exhaust Gas

Thermal Distillation Unit

Waste Heat Recovery

Sayı

Makale detayları

Experimental investigation of axial finned tube evaporator thermal distillation system using for diesel engine waste heat recovery process

Yazarlar: Prakash Chandra

Yayıncı: Yildiz Technical University

Ana Başlıklar: Thermodynamics and Statistical Physics

Dergi: Journal of Thermal Engineering Vol.10 Issue 2, pp.479-489

Belge Tipi: Makale

Yayın Tarihi: 3/2024

Belge Dili: İngilizce

Document ID (Org No.): 2001313863

pISSN: 2148-7847

Axial Finned Tube Evaporator

Exhaust Gas

Thermal Distillation Unit

Waste Heat Recovery

Sayı

Yazarlar:

Prakash Chandra

Yayıncı:

Yildiz Technical University

Ana Başlıklar:

Thermodynamics and Statistical Physics

Dergi:

Journal of Thermal Engineering Vol.10 Issue 2, pp.479-489

Belge Tipi:

Makale

Yayın Tarihi:

3/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001313863

pISSN:

2148-7847