Effects of material, infill pattern and infill density on the tensile strength of products produced by fused filament fabrication method

Pınar Köymen Çağar

Makale detayları

Effects of material, infill pattern and infill density on the tensile strength of products produced by fused filament fabrication method

Yazarlar:

Pınar Köymen Çağar

Yayıncı:

Yildiz Technical University

Ana Başlıklar:

Material Design and Behaviors | Manufacturing and Industrial Engineering (Other)

Dergi:

Journal of Advances in Manufacturing Engineering Vol.5 Issue 2, pp.61-73

Belge Tipi:

Makale

Yayın Tarihi:

12/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001337695

pISSN:

2717-7203

Anahtar kelimeler:

Özet:

 As a result of the development of additive manufacturing technology and the decrease in device and consumable costs, 3D printers have become widespread. With 3D printers, beyond the production of prototypes, the commercial product itself is now produced. The transition from prototype production to final product production is possible by increasing product strength. For this purpose, many factors such as filament type, infill density, infill geometry, nozzle diameter and temperature are studied in detail. In many studies where production is carried out with the FDM Fused Deposition Method, it is seen that PLA Polylactic Acid or ABS Acrylonitrile Butadiene Styrene consumables are used. In addition, infill geometry and infill density properties have been examined with limited filament types with different compositions in the literature. This article is designed to fill this gap in the literature. The research aims to increase product performance by examining the effects of fill geometry and fill density with different filament types and compositions. In this study, in order to investigate the mechanical properties of the product printed with FDM, samples were produced with 2 different fill geometries and 2 different fill densities using filaments with 5 different compositions and the tensile test results were examined.

 As a result of the development of additive manufacturing technology and the decrease in device and consumable costs, 3D printers have become widespread. With 3D printers, beyond the production of prototypes, the commercial product itself is now produced. The transition from prototype production to final product production is possible by increasing product strength. For this purpose, many factors such as filament type, infill density, infill geometry, nozzle diameter and temperature are studied in detail. In many studies where production is carried out with the FDM Fused Deposition Method, it is seen that PLA Polylactic Acid or ABS Acrylonitrile Butadiene Styrene consumables are used. In addition, infill geometry and infill density properties have been examined with limited filament types with different compositions in the literature. This article is designed to fill this gap in the literature. The research aims to increase product performance by examining the effects of fill geometry and fill density with different filament types and compositions. In this study, in order to investigate the mechanical properties of the product printed with FDM, samples were produced with 2 different fill geometries and 2 different fill densities using filaments with 5 different compositions and the tensile test results were examined.

 As a result of the development of additive manufacturing technology and the decrease in device and consumable costs, 3D printers have become widespread. With 3D printers, beyond the production of prototypes, the commercial product itself is now produced. The transition from prototype production to final product production is possible by increasing product strength. For this purpose, many factors such as filament type, infill density, infill geometry, nozzle diameter and temperature are studied in detail. In many studies where production is carried out with the FDM Fused Deposition Method, it is seen that PLA Polylactic Acid or ABS Acrylonitrile Butadiene Styrene consumables are used. In addition, infill geometry and infill density properties have been examined with limited filament types with different compositions in the literature. This article is designed to fill this gap in the literature. The research aims to increase product performance by examining the effects of fill geometry and fill density with different filament types and compositions. In this study, in order to investigate the mechanical properties of the product printed with FDM, samples were produced with 2 different fill geometries and 2 different fill densities using filaments with 5 different compositions and the tensile test results were examined.

 As a result of the development of additive manufacturing technology and the decrease in device and consumable costs, 3D printers have become widespread. With 3D printers, beyond the production of prototypes, the commercial product itself is now produced. The transition from prototype production to final product production is possible by increasing product strength. For this purpose, many factors such as filament type, infill density, infill geometry, nozzle diameter and temperature are studied in detail. In many studies where production is carried out with the FDM Fused Deposition Method, it is seen that PLA Polylactic Acid or ABS Acrylonitrile Butadiene Styrene consumables are used. In addition, infill geometry and infill density properties have been examined with limited filament types with different compositions in the literature. This article is designed to fill this gap in the literature. The research aims to increase product performance by examining the effects of fill geometry and fill density with different filament types and compositions. In this study, in order to investigate the mechanical properties of the product printed with FDM, samples were produced with 2 different fill geometries and 2 different fill densities using filaments with 5 different compositions and the tensile test results were examined.

Makale detayları

Effects of material, infill pattern and infill density on the tensile strength of products produced by fused filament fabrication method

Yazarlar:

Pınar Köymen Çağar

Yayıncı:

Yildiz Technical University

Ana Başlıklar:

Material Design and Behaviors | Manufacturing and Industrial Engineering (Other)

Dergi:

Journal of Advances in Manufacturing Engineering Vol.5 Issue 2, pp.61-73

Belge Tipi:

Makale

Yayın Tarihi:

12/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001337695

pISSN:

2717-7203

Additive manufacturing

filling density

mechanical properties

FDM

Sayı

Makale detayları

Effects of material, infill pattern and infill density on the tensile strength of products produced by fused filament fabrication method

Yazarlar: Pınar Köymen Çağar

Yayıncı: Yildiz Technical University

Ana Başlıklar: Material Design and Behaviors | Manufacturing and Industrial Engineering (Other)

Dergi: Journal of Advances in Manufacturing Engineering Vol.5 Issue 2, pp.61-73

Belge Tipi: Makale

Yayın Tarihi: 12/2024

Belge Dili: İngilizce

Document ID (Org No.): 2001337695

pISSN: 2717-7203

Additive manufacturing

filling density

mechanical properties

FDM

Sayı

Yazarlar:

Pınar Köymen Çağar

Yayıncı:

Yildiz Technical University

Ana Başlıklar:

Material Design and Behaviors | Manufacturing and Industrial Engineering (Other)

Dergi:

Journal of Advances in Manufacturing Engineering Vol.5 Issue 2, pp.61-73

Belge Tipi:

Makale

Yayın Tarihi:

12/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001337695

pISSN:

2717-7203