Small Size Broadband Printed Antenna for 5G Applications Covering 28 GHz / 38 GHz and 60 GHz Bands

Vijay Sharma; Nipun Kumar Mishra; Atul Agarwal; N L Gupta

Makale detayları

Small Size Broadband Printed Antenna for 5G Applications Covering 28 GHz / 38 GHz and 60 GHz Bands

Yazarlar:

Vijay Sharma | Nipun Kumar Mishra | Atul Agarwal | N L Gupta

Yayıncı:

Gazi University

Ana Başlıklar:

Engineering

Dergi:

Gazi University Journal of Science Vol.37 Issue 1, pp.211-220

Belge Tipi:

Makale

Yayın Tarihi:

1/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001300198

pISSN:

2147-1762

Anahtar kelimeler:

Özet:

 This work offers the radiation insight of a compact modified monopole rectangular printed antenna suitable for 5G applications. A Double copper cladded RT Duroid 5880 material sheet with dimensions 4.45.00.5mm3 is chosen as the base substrate in the offered design with a loss tangent of 0.004 and a dielectric constant of 2.2. In the provided strategy lower-left corner of a rectangular printed antenna is made in the form of a smooth circular curve. After extensive simulation, a circular slot with an elliptical patch is incorporated into this monopole antenna. The designed antenna parameters are adjusted to cover the impedance bandwidth from 21.7 GHz to more than 70.0 GHz. Three resonances at 28.0 GHz, 38.1 GHz and 60.2 GHz were observed in three bands allocated for 5G communication applications. The efficiency and gain values found sustained in the entire bandwidth range. Stable and desired radiation patterns at all three resonant frequencies 283860 GHz prove the suitability of this antenna for recent 5G applications.

 This work offers the radiation insight of a compact modified monopole rectangular printed antenna suitable for 5G applications. A Double copper cladded RT Duroid 5880 material sheet with dimensions 4.45.00.5mm3 is chosen as the base substrate in the offered design with a loss tangent of 0.004 and a dielectric constant of 2.2. In the provided strategy lower-left corner of a rectangular printed antenna is made in the form of a smooth circular curve. After extensive simulation, a circular slot with an elliptical patch is incorporated into this monopole antenna. The designed antenna parameters are adjusted to cover the impedance bandwidth from 21.7 GHz to more than 70.0 GHz. Three resonances at 28.0 GHz, 38.1 GHz and 60.2 GHz were observed in three bands allocated for 5G communication applications. The efficiency and gain values found sustained in the entire bandwidth range. Stable and desired radiation patterns at all three resonant frequencies 283860 GHz prove the suitability of this antenna for recent 5G applications.

 This work offers the radiation insight of a compact modified monopole rectangular printed antenna suitable for 5G applications. A Double copper cladded RT Duroid 5880 material sheet with dimensions 4.45.00.5mm3 is chosen as the base substrate in the offered design with a loss tangent of 0.004 and a dielectric constant of 2.2. In the provided strategy lower-left corner of a rectangular printed antenna is made in the form of a smooth circular curve. After extensive simulation, a circular slot with an elliptical patch is incorporated into this monopole antenna. The designed antenna parameters are adjusted to cover the impedance bandwidth from 21.7 GHz to more than 70.0 GHz. Three resonances at 28.0 GHz, 38.1 GHz and 60.2 GHz were observed in three bands allocated for 5G communication applications. The efficiency and gain values found sustained in the entire bandwidth range. Stable and desired radiation patterns at all three resonant frequencies 283860 GHz prove the suitability of this antenna for recent 5G applications.

 This work offers the radiation insight of a compact modified monopole rectangular printed antenna suitable for 5G applications. A Double copper cladded RT Duroid 5880 material sheet with dimensions 4.45.00.5mm3 is chosen as the base substrate in the offered design with a loss tangent of 0.004 and a dielectric constant of 2.2. In the provided strategy lower-left corner of a rectangular printed antenna is made in the form of a smooth circular curve. After extensive simulation, a circular slot with an elliptical patch is incorporated into this monopole antenna. The designed antenna parameters are adjusted to cover the impedance bandwidth from 21.7 GHz to more than 70.0 GHz. Three resonances at 28.0 GHz, 38.1 GHz and 60.2 GHz were observed in three bands allocated for 5G communication applications. The efficiency and gain values found sustained in the entire bandwidth range. Stable and desired radiation patterns at all three resonant frequencies 283860 GHz prove the suitability of this antenna for recent 5G applications.

Makale detayları

Small Size Broadband Printed Antenna for 5G Applications Covering 28 GHz / 38 GHz and 60 GHz Bands

Yazarlar:

Vijay Sharma | Nipun Kumar Mishra | Atul Agarwal | N L Gupta

Yayıncı:

Gazi University

Ana Başlıklar:

Engineering

Dergi:

Gazi University Journal of Science Vol.37 Issue 1, pp.211-220

Belge Tipi:

Makale

Yayın Tarihi:

1/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001300198

pISSN:

2147-1762

Antenna radiation patterns

Axial ratio

Frequency bands

5G applications

Sayı

Makale detayları

Small Size Broadband Printed Antenna for 5G Applications Covering 28 GHz / 38 GHz and 60 GHz Bands

Yazarlar: Vijay Sharma | Nipun Kumar Mishra | Atul Agarwal | N L Gupta

Yayıncı: Gazi University

Ana Başlıklar: Engineering

Dergi: Gazi University Journal of Science Vol.37 Issue 1, pp.211-220

Belge Tipi: Makale

Yayın Tarihi: 1/2024

Belge Dili: İngilizce

Document ID (Org No.): 2001300198

pISSN: 2147-1762

Antenna radiation patterns

Axial ratio

Frequency bands

5G applications

Sayı

Yazarlar:

Vijay Sharma | Nipun Kumar Mishra | Atul Agarwal | N L Gupta

Yayıncı:

Gazi University

Ana Başlıklar:

Engineering

Dergi:

Gazi University Journal of Science Vol.37 Issue 1, pp.211-220

Belge Tipi:

Makale

Yayın Tarihi:

1/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001300198

pISSN:

2147-1762