Optimization of cleansing oil formulation containing polyglyceryl-6 caprylate and polyglyceryl-4 caprate using the response surface method

Ayşenur Kılıç; Burak Çelik

Makale detayları

Optimization of cleansing oil formulation containing polyglyceryl-6 caprylate and polyglyceryl-4 caprate using the response surface method

Yazarlar:

Ayşenur Kılıç | Burak Çelik

Yayıncı:

Istanbul University

Ana Başlıklar:

Pharmacology and Pharmaceutical Sciences (Other)

Dergi:

İstanbul Journal of Pharmacy Vol.55 Issue 1, pp.85-92

Belge Tipi:

Makale

Yayın Tarihi:

7/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001353995

pISSN:

2587-2087

Anahtar kelimeler:

Özet:

 Background and Aims: Natural raw materials used in skin cleansing products have recently become popular. In this study, natural-origin raw materials were used to develop an oil-based cleanser formulation with high foaming ability and stable properties. The researchers attempted to obtain the optimum formulation by determining the optimised polyglyceryl-6 caprylatepolyglyceryl-4 caprate PG-6PG-4 ratio. Methods: Cleansing formulations were prepared using capryliccapric triglyceride CCT, hemp seed oil, and PG-6PG-4. The D-optimal response surface design was used to determine the optimum formulation component ratios. The foaming volumes and the transparency of the formulations were also evaluated. The pH and viscosity of the formulations were also measured. Stability tests of the formulations were carried out at 40oC and 75 relative humidity conditions for 2 months. The optimum component quantities were determined by the Design-Expert software. Results: The ratios of the formulation components were found to be 4.3 for PG-6PG-4, 5.6 for water, and 34.1 for CCT as optimised formulation. The foam volume was found to be 1.06 mL, and the transparency was observed to be 4 out of the maximum 5. The pH of the formulation was 6.61. It exhibited pseudoplastic flow properties, and as a result of stability studies, there were no significant changes in its pH, transparency, and foaming properties. Conclusion: In this study, we obtained a cleansing product composed of natural compounds with acceptable properties and stability.

 Background and Aims: Natural raw materials used in skin cleansing products have recently become popular. In this study, natural-origin raw materials were used to develop an oil-based cleanser formulation with high foaming ability and stable properties. The researchers attempted to obtain the optimum formulation by determining the optimised polyglyceryl-6 caprylatepolyglyceryl-4 caprate PG-6PG-4 ratio. Methods: Cleansing formulations were prepared using capryliccapric triglyceride CCT, hemp seed oil, and PG-6PG-4. The D-optimal response surface design was used to determine the optimum formulation component ratios. The foaming volumes and the transparency of the formulations were also evaluated. The pH and viscosity of the formulations were also measured. Stability tests of the formulations were carried out at 40oC and 75 relative humidity conditions for 2 months. The optimum component quantities were determined by the Design-Expert software. Results: The ratios of the formulation components were found to be 4.3 for PG-6PG-4, 5.6 for water, and 34.1 for CCT as optimised formulation. The foam volume was found to be 1.06 mL, and the transparency was observed to be 4 out of the maximum 5. The pH of the formulation was 6.61. It exhibited pseudoplastic flow properties, and as a result of stability studies, there were no significant changes in its pH, transparency, and foaming properties. Conclusion: In this study, we obtained a cleansing product composed of natural compounds with acceptable properties and stability.

 Background and Aims: Natural raw materials used in skin cleansing products have recently become popular. In this study, natural-origin raw materials were used to develop an oil-based cleanser formulation with high foaming ability and stable properties. The researchers attempted to obtain the optimum formulation by determining the optimised polyglyceryl-6 caprylatepolyglyceryl-4 caprate PG-6PG-4 ratio. Methods: Cleansing formulations were prepared using capryliccapric triglyceride CCT, hemp seed oil, and PG-6PG-4. The D-optimal response surface design was used to determine the optimum formulation component ratios. The foaming volumes and the transparency of the formulations were also evaluated. The pH and viscosity of the formulations were also measured. Stability tests of the formulations were carried out at 40oC and 75 relative humidity conditions for 2 months. The optimum component quantities were determined by the Design-Expert software. Results: The ratios of the formulation components were found to be 4.3 for PG-6PG-4, 5.6 for water, and 34.1 for CCT as optimised formulation. The foam volume was found to be 1.06 mL, and the transparency was observed to be 4 out of the maximum 5. The pH of the formulation was 6.61. It exhibited pseudoplastic flow properties, and as a result of stability studies, there were no significant changes in its pH, transparency, and foaming properties. Conclusion: In this study, we obtained a cleansing product composed of natural compounds with acceptable properties and stability.

 Background and Aims: Natural raw materials used in skin cleansing products have recently become popular. In this study, natural-origin raw materials were used to develop an oil-based cleanser formulation with high foaming ability and stable properties. The researchers attempted to obtain the optimum formulation by determining the optimised polyglyceryl-6 caprylatepolyglyceryl-4 caprate PG-6PG-4 ratio. Methods: Cleansing formulations were prepared using capryliccapric triglyceride CCT, hemp seed oil, and PG-6PG-4. The D-optimal response surface design was used to determine the optimum formulation component ratios. The foaming volumes and the transparency of the formulations were also evaluated. The pH and viscosity of the formulations were also measured. Stability tests of the formulations were carried out at 40oC and 75 relative humidity conditions for 2 months. The optimum component quantities were determined by the Design-Expert software. Results: The ratios of the formulation components were found to be 4.3 for PG-6PG-4, 5.6 for water, and 34.1 for CCT as optimised formulation. The foam volume was found to be 1.06 mL, and the transparency was observed to be 4 out of the maximum 5. The pH of the formulation was 6.61. It exhibited pseudoplastic flow properties, and as a result of stability studies, there were no significant changes in its pH, transparency, and foaming properties. Conclusion: In this study, we obtained a cleansing product composed of natural compounds with acceptable properties and stability.

Makale detayları

Optimization of cleansing oil formulation containing polyglyceryl-6 caprylate and polyglyceryl-4 caprate using the response surface method

Yazarlar:

Ayşenur Kılıç | Burak Çelik

Yayıncı:

Istanbul University

Ana Başlıklar:

Pharmacology and Pharmaceutical Sciences (Other)

Dergi:

İstanbul Journal of Pharmacy Vol.55 Issue 1, pp.85-92

Belge Tipi:

Makale

Yayın Tarihi:

7/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001353995

pISSN:

2587-2087

Cosmetics

Experimental design

Hemp seed oil

Skincare

Surface-active agents

Sayı

Makale detayları

Optimization of cleansing oil formulation containing polyglyceryl-6 caprylate and polyglyceryl-4 caprate using the response surface method

Yazarlar: Ayşenur Kılıç | Burak Çelik

Yayıncı: Istanbul University

Ana Başlıklar: Pharmacology and Pharmaceutical Sciences (Other)

Dergi: İstanbul Journal of Pharmacy Vol.55 Issue 1, pp.85-92

Belge Tipi: Makale

Yayın Tarihi: 7/2025

Belge Dili: İngilizce

Document ID (Org No.): 2001353995

pISSN: 2587-2087

Cosmetics

Experimental design

Hemp seed oil

Skincare

Surface-active agents

Sayı

Yazarlar:

Ayşenur Kılıç | Burak Çelik

Yayıncı:

Istanbul University

Ana Başlıklar:

Pharmacology and Pharmaceutical Sciences (Other)

Dergi:

İstanbul Journal of Pharmacy Vol.55 Issue 1, pp.85-92

Belge Tipi:

Makale

Yayın Tarihi:

7/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001353995

pISSN:

2587-2087