UV and UV+ Water Effects on Mechanical, Thermal and Morphological Properties of Thermoplastic Polyurethane Based Composites

Sedef Şişmanoğlu

Makale detayları

UV and UV+ Water Effects on Mechanical, Thermal and Morphological Properties of Thermoplastic Polyurethane Based Composites

Yazarlar:

Sedef Şişmanoğlu

Yayıncı:

Hitit University

Ana Başlıklar:

Engineering

Dergi:

Hittite Journal of Science and Engineering Vol.10 Issue 2, pp.177-184

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001292981

pISSN:

2148-4171

Anahtar kelimeler:

Özet:

 The degradation times of composite materials containing petroleum-based polymer matrix are quite long in nature and it causes environmental pollution. Researchers focus on producing alternative composite materials with organic andor inorganic fillers to reduce degradation times in nature. In addition, the mechanical and chemical properties of polymer matrix composites are affected by heat, light, moisture and surface compatibility between matrix and filler. In the light of this information, many researchers examine the mechanical, thermal, morphological and similar properties of organic andor inorganic filler composites by using artificial aging processes using one or more of the water, UV and temperature parameters. In this study, bentonite with surface modification by epoxysilane agent, and bentonite without any surface modification will be added to the thermoplastic polyurethane TPU polymer matrix, which has two different segments, and will be mixed in a twin screw extruder and it will then be shaped by the injection molding process. Artificial aging processes of the obtained composites will be done under UV and UVwater for 2 and 4 weeks, respectively. The reason for choosing UV and UVwater processes is that UV and water processes have not been applied together at the same time and there is not much knowledge in the literature on this subject. Mechanical, thermal and morphological properties of composites were investigated.

 The degradation times of composite materials containing petroleum-based polymer matrix are quite long in nature and it causes environmental pollution. Researchers focus on producing alternative composite materials with organic andor inorganic fillers to reduce degradation times in nature. In addition, the mechanical and chemical properties of polymer matrix composites are affected by heat, light, moisture and surface compatibility between matrix and filler. In the light of this information, many researchers examine the mechanical, thermal, morphological and similar properties of organic andor inorganic filler composites by using artificial aging processes using one or more of the water, UV and temperature parameters. In this study, bentonite with surface modification by epoxysilane agent, and bentonite without any surface modification will be added to the thermoplastic polyurethane TPU polymer matrix, which has two different segments, and will be mixed in a twin screw extruder and it will then be shaped by the injection molding process. Artificial aging processes of the obtained composites will be done under UV and UVwater for 2 and 4 weeks, respectively. The reason for choosing UV and UVwater processes is that UV and water processes have not been applied together at the same time and there is not much knowledge in the literature on this subject. Mechanical, thermal and morphological properties of composites were investigated.

 The degradation times of composite materials containing petroleum-based polymer matrix are quite long in nature and it causes environmental pollution. Researchers focus on producing alternative composite materials with organic andor inorganic fillers to reduce degradation times in nature. In addition, the mechanical and chemical properties of polymer matrix composites are affected by heat, light, moisture and surface compatibility between matrix and filler. In the light of this information, many researchers examine the mechanical, thermal, morphological and similar properties of organic andor inorganic filler composites by using artificial aging processes using one or more of the water, UV and temperature parameters. In this study, bentonite with surface modification by epoxysilane agent, and bentonite without any surface modification will be added to the thermoplastic polyurethane TPU polymer matrix, which has two different segments, and will be mixed in a twin screw extruder and it will then be shaped by the injection molding process. Artificial aging processes of the obtained composites will be done under UV and UVwater for 2 and 4 weeks, respectively. The reason for choosing UV and UVwater processes is that UV and water processes have not been applied together at the same time and there is not much knowledge in the literature on this subject. Mechanical, thermal and morphological properties of composites were investigated.

 The degradation times of composite materials containing petroleum-based polymer matrix are quite long in nature and it causes environmental pollution. Researchers focus on producing alternative composite materials with organic andor inorganic fillers to reduce degradation times in nature. In addition, the mechanical and chemical properties of polymer matrix composites are affected by heat, light, moisture and surface compatibility between matrix and filler. In the light of this information, many researchers examine the mechanical, thermal, morphological and similar properties of organic andor inorganic filler composites by using artificial aging processes using one or more of the water, UV and temperature parameters. In this study, bentonite with surface modification by epoxysilane agent, and bentonite without any surface modification will be added to the thermoplastic polyurethane TPU polymer matrix, which has two different segments, and will be mixed in a twin screw extruder and it will then be shaped by the injection molding process. Artificial aging processes of the obtained composites will be done under UV and UVwater for 2 and 4 weeks, respectively. The reason for choosing UV and UVwater processes is that UV and water processes have not been applied together at the same time and there is not much knowledge in the literature on this subject. Mechanical, thermal and morphological properties of composites were investigated.

Makale detayları

UV and UV+ Water Effects on Mechanical, Thermal and Morphological Properties of Thermoplastic Polyurethane Based Composites

Yazarlar:

Sedef Şişmanoğlu

Yayıncı:

Hitit University

Ana Başlıklar:

Engineering

Dergi:

Hittite Journal of Science and Engineering Vol.10 Issue 2, pp.177-184

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001292981

pISSN:

2148-4171

TPU

Bentonite

Artificial aging

Silanization

Composite

Sayı

Makale detayları

UV and UV+ Water Effects on Mechanical, Thermal and Morphological Properties of Thermoplastic Polyurethane Based Composites

Yazarlar: Sedef Şişmanoğlu

Yayıncı: Hitit University

Ana Başlıklar: Engineering

Dergi: Hittite Journal of Science and Engineering Vol.10 Issue 2, pp.177-184

Belge Tipi: Makale

Yayın Tarihi: 6/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001292981

pISSN: 2148-4171

TPU

Bentonite

Artificial aging

Silanization

Composite

Sayı

Yazarlar:

Sedef Şişmanoğlu

Yayıncı:

Hitit University

Ana Başlıklar:

Engineering

Dergi:

Hittite Journal of Science and Engineering Vol.10 Issue 2, pp.177-184

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001292981

pISSN:

2148-4171