Design and Manufacturing of 4D Additive Manufacturing Device For The Production of Biocompatible Materials

Yunus Kartal; Deniz Doğan; Memik Taylan Daş; Ayşegül Ülkü Metin

Makale detayları

Design and Manufacturing of 4D Additive Manufacturing Device For The Production of Biocompatible Materials

Yazarlar:

Yunus Kartal | Deniz Doğan | Memik Taylan Daş | Ayşegül Ülkü Metin

Yayıncı:

Kirikkale University

Ana Başlıklar:

Mechanical Engineering

Dergi:

International Journal of Engineering Research and Development Vol.15 Issue 2, pp.840-847

Belge Tipi:

Makale

Yayın Tarihi:

7/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001284777

pISSN:

1308-5506

Anahtar kelimeler:

Özet:

 The aim of this study is to design and manufacture a 4 Dimensional 4D additive manufacturing device with a fourth axis rotating around its axis, in addition to conventional Cartesian axes, for the production of biocompatible materials. In this context, theoretical and technical details of various mechanical and electronic accessories or components are given. The four-dimensional printer within the scope of the study works in an isolated environment in order to prevent the properties of the produced materials from being affected by atmospheric conditions. In the device designed and manufactured, poly2-hydroxyethyl methacrylate was produced under ultraviolet light and its mechanical properties were investigated.

 The aim of this study is to design and manufacture a 4 Dimensional 4D additive manufacturing device with a fourth axis rotating around its axis, in addition to conventional Cartesian axes, for the production of biocompatible materials. In this context, theoretical and technical details of various mechanical and electronic accessories or components are given. The four-dimensional printer within the scope of the study works in an isolated environment in order to prevent the properties of the produced materials from being affected by atmospheric conditions. In the device designed and manufactured, poly2-hydroxyethyl methacrylate was produced under ultraviolet light and its mechanical properties were investigated.

 The aim of this study is to design and manufacture a 4 Dimensional 4D additive manufacturing device with a fourth axis rotating around its axis, in addition to conventional Cartesian axes, for the production of biocompatible materials. In this context, theoretical and technical details of various mechanical and electronic accessories or components are given. The four-dimensional printer within the scope of the study works in an isolated environment in order to prevent the properties of the produced materials from being affected by atmospheric conditions. In the device designed and manufactured, poly2-hydroxyethyl methacrylate was produced under ultraviolet light and its mechanical properties were investigated.

 Bu çalışmanın amacı biyouyumlu malzemelerin üretimi için alışılagelmiş kartezyen eksenlerinin haricinde tablada bulunan ve ekseni etrafında dönen dördüncü eksene sahip dört boyutlu 4D eklemeli imalat cihazı tasarımı ve üretimidir. Bu kapsamda çeşitli mekanik ve elektronik aksesuar veya bileşenlerin teorik ve teknik detayları verilmektedir. Çalışma kapsamındaki dört boyutlu yazıcı üretilen malzemelerin özelliklerinin atmosfer koşullarından etkilenmesini engellemek amacıyla izole bir ortamda çalışmaktadır. Tasarımı ve üretimi gerçekleştirilen cihazda ultraviyole ışın altında poli2-hidroksietil metakrilat üretilmiş ve mekanik özellikleri incelenmiştir.

Makale detayları

Design and Manufacturing of 4D Additive Manufacturing Device For The Production of Biocompatible Materials

Yazarlar:

Yunus Kartal | Deniz Doğan | Memik Taylan Daş | Ayşegül Ülkü Metin

Yayıncı:

Kirikkale University

Ana Başlıklar:

Mechanical Engineering

Dergi:

International Journal of Engineering Research and Development Vol.15 Issue 2, pp.840-847

Belge Tipi:

Makale

Yayın Tarihi:

7/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001284777

pISSN:

1308-5506

Additive manufacturing

spin coating

biocompatible material

in-mold manufacturing

ultraviolet (UV) polymerization

Eklemeli imalat

dönerek kaplama

biyouyumlu malzeme

kalıp içerisinde imalat

ultraviyole ışın (UV) ile polimerizasyon

Sayı

Makale detayları

Yazarlar: Yunus Kartal | Deniz Doğan | Memik Taylan Daş | Ayşegül Ülkü Metin

Yayıncı: Kirikkale University

Ana Başlıklar: Mechanical Engineering

Dergi: International Journal of Engineering Research and Development Vol.15 Issue 2, pp.840-847

Belge Tipi: Makale

Yayın Tarihi: 7/2023

Belge Dili: Türkçe

Document ID (Org No.): 2001284777

pISSN: 1308-5506

Sayı

Yazarlar:

Yunus Kartal | Deniz Doğan | Memik Taylan Daş | Ayşegül Ülkü Metin

Yayıncı:

Kirikkale University

Ana Başlıklar:

Mechanical Engineering

Dergi:

International Journal of Engineering Research and Development Vol.15 Issue 2, pp.840-847

Belge Tipi:

Makale

Yayın Tarihi:

7/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001284777

pISSN:

1308-5506