An experimental investigation of an inclined solar chimney integrated into residential buildings with different materials construction for natural ventilation in a hot-arid climate

N.A.

Makale detayları

An experimental investigation of an inclined solar chimney integrated into residential buildings with different materials construction for natural ventilation in a hot-arid climate

Yazarlar:

N.A.

Yayıncı:

Yildiz Technical University

Ana Başlıklar:

Fluid Mechanics and Thermal Engineering (Other)

Dergi:

Journal of Thermal Engineering Vol.11 Issue 3, pp.643-658

Belge Tipi:

Makale

Yayın Tarihi:

5/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001348328

pISSN:

2148-7847

Anahtar kelimeler:

Özet:

 Solar chimneys are used to ventilate residential buildings, helping reduce infections caused by the recent COVID-19 pandemic. An experimental investigation was conducted to evaluate the efficiency of rooftop solar chimneys by assessing the thermal performance of two small rooms constructed from the two most commonly used building materials in the region: local stone and hollow brick. The study examined the effects of building materials, chimney inclination angles of 30, 45, and 60, and air gaps 0.15 m and 0.25 m on the chimneys performance under real climatic conditions at the University of Ouargla, Algeria, known for its dry and hot climate, from May 8 to 13, 2021. The results showed that installation factors significantly affect the performance of solar chimneys. The inclination angle had the most significant impact, potentially enhancing performance by up to 20. Additionally, selecting suitable building materials, such as local stone, for specific geographical areas can improve performance by at least 15 during peak times. The air gap, as a configuration factor, contributes to a 14 improvement in performance. The analysis revealed that the highest indoor air velocity in the living area can be achieved using a solar chimney with specific dimensions of 1 m x 0.65 m, an air gap of 0.25 m, and an inclination angle of 45. At average solar radiation levels of 550, 800, and 950 Wm2, the solar chimney can achieve air change rates of 5, 6.5, and 7.8 air changes per hour ACH, respectively.

 Solar chimneys are used to ventilate residential buildings, helping reduce infections caused by the recent COVID-19 pandemic. An experimental investigation was conducted to evaluate the efficiency of rooftop solar chimneys by assessing the thermal performance of two small rooms constructed from the two most commonly used building materials in the region: local stone and hollow brick. The study examined the effects of building materials, chimney inclination angles of 30, 45, and 60, and air gaps 0.15 m and 0.25 m on the chimneys performance under real climatic conditions at the University of Ouargla, Algeria, known for its dry and hot climate, from May 8 to 13, 2021. The results showed that installation factors significantly affect the performance of solar chimneys. The inclination angle had the most significant impact, potentially enhancing performance by up to 20. Additionally, selecting suitable building materials, such as local stone, for specific geographical areas can improve performance by at least 15 during peak times. The air gap, as a configuration factor, contributes to a 14 improvement in performance. The analysis revealed that the highest indoor air velocity in the living area can be achieved using a solar chimney with specific dimensions of 1 m x 0.65 m, an air gap of 0.25 m, and an inclination angle of 45. At average solar radiation levels of 550, 800, and 950 Wm2, the solar chimney can achieve air change rates of 5, 6.5, and 7.8 air changes per hour ACH, respectively.

 Solar chimneys are used to ventilate residential buildings, helping reduce infections caused by the recent COVID-19 pandemic. An experimental investigation was conducted to evaluate the efficiency of rooftop solar chimneys by assessing the thermal performance of two small rooms constructed from the two most commonly used building materials in the region: local stone and hollow brick. The study examined the effects of building materials, chimney inclination angles of 30, 45, and 60, and air gaps 0.15 m and 0.25 m on the chimneys performance under real climatic conditions at the University of Ouargla, Algeria, known for its dry and hot climate, from May 8 to 13, 2021. The results showed that installation factors significantly affect the performance of solar chimneys. The inclination angle had the most significant impact, potentially enhancing performance by up to 20. Additionally, selecting suitable building materials, such as local stone, for specific geographical areas can improve performance by at least 15 during peak times. The air gap, as a configuration factor, contributes to a 14 improvement in performance. The analysis revealed that the highest indoor air velocity in the living area can be achieved using a solar chimney with specific dimensions of 1 m x 0.65 m, an air gap of 0.25 m, and an inclination angle of 45. At average solar radiation levels of 550, 800, and 950 Wm2, the solar chimney can achieve air change rates of 5, 6.5, and 7.8 air changes per hour ACH, respectively.

 Solar chimneys are used to ventilate residential buildings, helping reduce infections caused by the recent COVID-19 pandemic. An experimental investigation was conducted to evaluate the efficiency of rooftop solar chimneys by assessing the thermal performance of two small rooms constructed from the two most commonly used building materials in the region: local stone and hollow brick. The study examined the effects of building materials, chimney inclination angles of 30, 45, and 60, and air gaps 0.15 m and 0.25 m on the chimneys performance under real climatic conditions at the University of Ouargla, Algeria, known for its dry and hot climate, from May 8 to 13, 2021. The results showed that installation factors significantly affect the performance of solar chimneys. The inclination angle had the most significant impact, potentially enhancing performance by up to 20. Additionally, selecting suitable building materials, such as local stone, for specific geographical areas can improve performance by at least 15 during peak times. The air gap, as a configuration factor, contributes to a 14 improvement in performance. The analysis revealed that the highest indoor air velocity in the living area can be achieved using a solar chimney with specific dimensions of 1 m x 0.65 m, an air gap of 0.25 m, and an inclination angle of 45. At average solar radiation levels of 550, 800, and 950 Wm2, the solar chimney can achieve air change rates of 5, 6.5, and 7.8 air changes per hour ACH, respectively.

Makale detayları

An experimental investigation of an inclined solar chimney integrated into residential buildings with different materials construction for natural ventilation in a hot-arid climate

Yazarlar:

N.A.

Yayıncı:

Yildiz Technical University

Ana Başlıklar:

Fluid Mechanics and Thermal Engineering (Other)

Dergi:

Journal of Thermal Engineering Vol.11 Issue 3, pp.643-658

Belge Tipi:

Makale

Yayın Tarihi:

5/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001348328

pISSN:

2148-7847

Building Materials

Performance

Solar Chimney

Thermal Comfort

Thermal Inertia

Ventilation

Sayı

Makale detayları

An experimental investigation of an inclined solar chimney integrated into residential buildings with different materials construction for natural ventilation in a hot-arid climate

Yazarlar: N.A.

Yayıncı: Yildiz Technical University

Ana Başlıklar: Fluid Mechanics and Thermal Engineering (Other)

Dergi: Journal of Thermal Engineering Vol.11 Issue 3, pp.643-658

Belge Tipi: Makale

Yayın Tarihi: 5/2025

Belge Dili: İngilizce

Document ID (Org No.): 2001348328

pISSN: 2148-7847

Building Materials

Performance

Solar Chimney

Thermal Comfort

Thermal Inertia

Ventilation

Sayı

Yazarlar:

N.A.

Yayıncı:

Yildiz Technical University

Ana Başlıklar:

Fluid Mechanics and Thermal Engineering (Other)

Dergi:

Journal of Thermal Engineering Vol.11 Issue 3, pp.643-658

Belge Tipi:

Makale

Yayın Tarihi:

5/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001348328

pISSN:

2148-7847