An Experimental Investigation of the Ultrasonic-Assisted Machining of Ti6Al4V

Fatih Hayati ÇAKIR; Selim GÜRGEN; Sezen ORAK; Melih Cemal KUŞHAN; Mehmet Alper SOFUOĞLU

Makale detayları

An Experimental Investigation of the Ultrasonic-Assisted Machining of Ti6Al4V

Yazarlar:

Fatih Hayati ÇAKIR | Selim GÜRGEN | Sezen ORAK | Melih Cemal KUŞHAN | Mehmet Alper SOFUOĞLU

Yayıncı:

Makina Tasarım ve İmalat Derneği

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

Makina Tasarım ve İmalat Dergisi 2018 Vol.16 Issue 1, pp.7-11

Belge Tipi:

Makale

Yayın Tarihi:

5/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000523201

Sıklık:

İki Yıllık

eISSN:

2667-4297

pISSN:

1302-9487

Özet:

 


In this study, an experimental study was performed for the ultrasonicassisted turning of Ti6Al4V. The surface properties of titanium alloy machined by ultrasonic-assisted turning method were examined. Also, chip morphology was investigated. These measurements were compared with conventional turning operations performed with same cutting parameters. It was seen that ultrasonic-assisted turning affects surface properties. Average surface roughness was reduced, and less deformation was observed on the workpiece surface. Also, serrated and irregular chips were observed.

.

 


In this study, an experimental study was performed for the ultrasonic-assisted turning of Ti-6Al-4V. The surface properties of titanium alloy machined by ultrasonic-assisted turning method were examined. Also, chip morphology was investigated.  These measurements were compared with conventional turning operations performed with same cutting parameters. It was seen that ultrasonic-assisted turning affects surface properties. Average surface roughness was reduced, and less deformation was observed on the workpiece surface. Also, serrated and irregular chips were observed.


.

Makale detayları

An Experimental Investigation of the Ultrasonic-Assisted Machining of Ti6Al4V

Yazarlar: Fatih Hayati ÇAKIR | Selim GÜRGEN | Sezen ORAK | Melih Cemal KUŞHAN | Mehmet Alper SOFUOĞLU

Yayıncı: Makina Tasarım ve İmalat Derneği

Ana Başlıklar: Diğer mühendislik dalları

Dergi: Makina Tasarım ve İmalat Dergisi 2018 Vol.16 Issue 1, pp.7-11

Belge Tipi: Makale

Yayın Tarihi: 5/2019

Belge Dili: İngilizce

Document ID (Org No.): 2000523201

Sıklık: İki Yıllık

eISSN: 2667-4297

pISSN: 1302-9487

Sayı

Yazarlar:

Fatih Hayati ÇAKIR | Selim GÜRGEN | Sezen ORAK | Melih Cemal KUŞHAN | Mehmet Alper SOFUOĞLU

Yayıncı:

Makina Tasarım ve İmalat Derneği

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

Makina Tasarım ve İmalat Dergisi 2018 Vol.16 Issue 1, pp.7-11

Belge Tipi:

Makale

Yayın Tarihi:

5/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000523201

Sıklık:

İki Yıllık

eISSN:

2667-4297

pISSN:

1302-9487