INVESTIGATION OF EFFECTS OF DIFFERENT CUTTING AND MACHINING PARAMETERS ON SURFACE ROUGHNESS AND MAIN CUTTING FORCES VIA RESPONSE SURFACE METHOD

Hüseyin GÜRBÜZ; Yunus GÖNÜLAÇAR

doi:https://doi.org/10.36222/ejt.779327

Makale detayları

INVESTIGATION OF EFFECTS OF DIFFERENT CUTTING AND MACHINING PARAMETERS ON SURFACE ROUGHNESS AND MAIN CUTTING FORCES VIA RESPONSE SURFACE METHOD

Yazarlar:

Hüseyin GÜRBÜZ | Yunus GÖNÜLAÇAR

Yayıncı:

Hibetullah KILIÇ

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

European Journal of Technique (EJT) 2020 Vol.10 Issue 2, pp.431-443

Belge Tipi:

Makale

Yayın Tarihi:

12/2020

Belge Dili:

İngilizce

Document ID (Org No.):

2000425539

eISSN:

2536-5134

pISSN:

2536-5010

DOI:

https://doi.org/10.36222/ejt.779327

Özet:

 

In this study, the effects of the parameters of cutting speed, feed rate and minimum quantity lubrication (MQL) frequently employed in machining applications on main cutting force (Fc) and surface roughness (Ra) were investigated. For this purpose, analyses for Fc and Ra were performed utilizing Box-Behnken model. The efficiency of parameters and the changes in parameters on Fc and Ra were studied with the help of experiment set composed of 13 experiments by employing experimental parameters. Also, the effectiveness of design models was investigated by creating different design models. The high success rate modelling for Fc and Ra was realized with 99% success as a result of analyses conducted according to Box-Behnken and Stepwise, Backward and Forward methods of Box-Behnken. The most effective parameter among experimental parameters on Fc and Ra was found to be the feed rate according to Variance Analysis (ANOVA). It was demonstrated that the estimations on the created Box-Behnken model were quite successful on the data initially entered into the system; and that R2 values obtained for Fc and Ra were 0.999 and 0.996, respectively. It was determined that optimum parameters for the Fc were feed rate 0.25 mm/rev, cutting speed 125 m/min and cutting condition MQL2 ml/min, while they were feed rate 0.25 mm/rev, cutting speed 125 m/min and cutting condition MQL1 ml/min for Ra.

Makale detayları

INVESTIGATION OF EFFECTS OF DIFFERENT CUTTING AND MACHINING PARAMETERS ON SURFACE ROUGHNESS AND MAIN CUTTING FORCES VIA RESPONSE SURFACE METHOD

Yazarlar: Hüseyin GÜRBÜZ | Yunus GÖNÜLAÇAR

Yayıncı: Hibetullah KILIÇ

Ana Başlıklar: Diğer mühendislik dalları

Dergi: European Journal of Technique (EJT) 2020 Vol.10 Issue 2, pp.431-443

Belge Tipi: Makale

Yayın Tarihi: 12/2020

Belge Dili: İngilizce

Document ID (Org No.): 2000425539

eISSN: 2536-5134

pISSN: 2536-5010

DOI: https://doi.org/10.36222/ejt.779327

Sayı

Yazarlar:

Hüseyin GÜRBÜZ | Yunus GÖNÜLAÇAR

Yayıncı:

Hibetullah KILIÇ

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

European Journal of Technique (EJT) 2020 Vol.10 Issue 2, pp.431-443

Belge Tipi:

Makale

Yayın Tarihi:

12/2020

Belge Dili:

İngilizce

Document ID (Org No.):

2000425539

eISSN:

2536-5134

pISSN:

2536-5010

DOI:

https://doi.org/10.36222/ejt.779327