Investigation of Performance Properties of Denim Fabrics Produced from Recycled Cotton Blended Yarns

Gökhan Alp; Nida Yıldırım; Mehmet Kertmen; Hüseyin Türksoy

Makale detayları

Investigation of Performance Properties of Denim Fabrics Produced from Recycled Cotton Blended Yarns

Yazarlar:

Gökhan Alp | Nida Yıldırım | Mehmet Kertmen | Hüseyin Türksoy

Yayıncı:

Dokuz Eylul University

Dergi:

Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi Vol.25 Issue 74, pp.275-285

Belge Tipi:

Makale

Yayın Tarihi:

5/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001289550

pISSN:

1302-9304

Anahtar kelimeler:

Özet:

 Fast fashion cycle and cheap textile products with a short lifespan have led to an increase in the amount of textile waste. Accordingly, reasonable management of solid textile wastes has become imperative for the sustainable development of the textile industry. In the study, Open-End Rotor yarns were produced from recycled cotton r-COT and virgin cotton COT blends at different rates 2080, 3565, 5050, 100 and the properties of the yarns unevenness, hairiness, imperfection index, breaking strength and breaking elongation were investigated comparatively. It is seen that the yarn with the highest percentage of recycled cotton in its structure has the highest unevenness, hairiness and imperfection index values, and the lowest Rkm and breaking elongation values. 8 types of denim fabrics were produced from Open-End Rotor weft yarns produced from different blends in the study. When the analysis results of the fabrics produced within the scope of the study were examined, it was observed that when the recycled cotton ratio increased, the weft direction breaking strength, warp and weft direction tearing strength, relative water vapor permeability, thermal conductivity, thermal absorbtivity values decreased and the thickness values increased.

 Fast fashion cycle and cheap textile products with a short lifespan have led to an increase in the amount of textile waste. Accordingly, reasonable management of solid textile wastes has become imperative for the sustainable development of the textile industry. In the study, Open-End Rotor yarns were produced from recycled cotton r-COT and virgin cotton COT blends at different rates 2080, 3565, 5050, 100 and the properties of the yarns unevenness, hairiness, imperfection index, breaking strength and breaking elongation were investigated comparatively. It is seen that the yarn with the highest percentage of recycled cotton in its structure has the highest unevenness, hairiness and imperfection index values, and the lowest Rkm and breaking elongation values. 8 types of denim fabrics were produced from Open-End Rotor weft yarns produced from different blends in the study. When the analysis results of the fabrics produced within the scope of the study were examined, it was observed that when the recycled cotton ratio increased, the weft direction breaking strength, warp and weft direction tearing strength, relative water vapor permeability, thermal conductivity, thermal absorbtivity values decreased and the thickness values increased.

 Fast fashion cycle and cheap textile products with a short lifespan have led to an increase in the amount of textile waste. Accordingly, reasonable management of solid textile wastes has become imperative for the sustainable development of the textile industry. In the study, Open-End Rotor yarns were produced from recycled cotton r-COT and virgin cotton COT blends at different rates 2080, 3565, 5050, 100 and the properties of the yarns unevenness, hairiness, imperfection index, breaking strength and breaking elongation were investigated comparatively. It is seen that the yarn with the highest percentage of recycled cotton in its structure has the highest unevenness, hairiness and imperfection index values, and the lowest Rkm and breaking elongation values. 8 types of denim fabrics were produced from Open-End Rotor weft yarns produced from different blends in the study. When the analysis results of the fabrics produced within the scope of the study were examined, it was observed that when the recycled cotton ratio increased, the weft direction breaking strength, warp and weft direction tearing strength, relative water vapor permeability, thermal conductivity, thermal absorbtivity values decreased and the thickness values increased.

 Hızlı moda döngüsü ve kısa kullanım ömrüne sahip düşük maliyetli tekstil ürünleri, tekstil atık miktarının artmasına sebebiyet vermiştir. Buna bağlı olarak tekstil endüstrisinin sürdürülebilir gelişimi için, katı tekstil atıklarının makul bir şekilde yönetimi zorunlu hale gelmiştir. Çalışmada farklı oranlarda geri dönüşüm pamuk r-COT ve pamuk COT harmanlarından 2080, 3565, 5050, 100 Open-End Rotor iplikler üretilmiş ve ipliklerin özellikleri kütlesel düzgünsüzlük, Uster tüylülük, hata indeksi, kopma mukavemeti ve kopma uzaması karşılaştırmalı olarak incelenmiştir. Yapısında en fazla oranda geri dönüşüm pamuk bulunan ipliğin en yüksek kütlesel düzgünsüzlük, tüylülük ve hata indeksi değerlerine, en düşük Rkm ve kopma uzaması değerlerine sahip olduğu görülmektedir. Çalışmada farklı harmandan üretilen Open-End Rotor atkı ipliklerinden 8 tip denim kumaş üretilmiştir. Üretilen kumaşların tüm analiz sonuçları incelendiğinde, geri dönüşüm pamuk oranı arttığında atkı yönü kopma mukavemeti, çözgü ve atkı yönü yırtılma mukavemeti, bağıl su buharı geçirgenliği, ısıl iletkenlik, ısıl soğurganlık değerlerinin azaldığı, kalınlık değerlerinin arttığı görülmüştür.

Makale detayları

Investigation of Performance Properties of Denim Fabrics Produced from Recycled Cotton Blended Yarns

Yazarlar:

Gökhan Alp | Nida Yıldırım | Mehmet Kertmen | Hüseyin Türksoy

Yayıncı:

Dokuz Eylul University

Dergi:

Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi Vol.25 Issue 74, pp.275-285

Belge Tipi:

Makale

Yayın Tarihi:

5/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001289550

pISSN:

1302-9304

Pre-Consumer Textile Waste

Recycled Cotton

Open-End Rotor Yarn

Denim

Comfort PropertiesTüketici Öncesi Tekstil Atıkları

Geri Dönüşüm Pamuk

Open-End Rotor İplik

Denim

Konfor Özellikleri

Sayı

Makale detayları

Yazarlar: Gökhan Alp | Nida Yıldırım | Mehmet Kertmen | Hüseyin Türksoy

Yayıncı: Dokuz Eylul University

Dergi: Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi Vol.25 Issue 74, pp.275-285

Belge Tipi: Makale

Yayın Tarihi: 5/2023

Belge Dili: Türkçe

Document ID (Org No.): 2001289550

pISSN: 1302-9304

Sayı

Yazarlar:

Gökhan Alp | Nida Yıldırım | Mehmet Kertmen | Hüseyin Türksoy

Yayıncı:

Dokuz Eylul University

Dergi:

Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi Vol.25 Issue 74, pp.275-285

Belge Tipi:

Makale

Yayın Tarihi:

5/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001289550

pISSN:

1302-9304