An Investigation Of Amorphization In Fe-Al Alloys During Mechanical Alloying

Hakan GAŞAN; O.nuri ÇELİK; Nedret AYDINBEYLİ

Makale detayları

An Investigation Of Amorphization In Fe-Al Alloys During Mechanical Alloying

Yazarlar:

Hakan GAŞAN | O.nuri ÇELİK | Nedret AYDINBEYLİ

Yayıncı:

Eskişehir Osmangazi University

Ana Başlıklar:

İmalat

Dergi:

Journal of Engineering and Architecture Faculty of Eskisehir Osmangazi University 2008 Vol.21 Issue 1, pp.183-192

Belge Tipi:

Makale

Yayın Tarihi:

6/2008

Belge Dili:

Türkçe

Document ID (Org No.):

2000416571

eISSN:

2630-5712

Özet:

 





In order to determine the
amorphization time, Fe and Al elemental powder mixtures with composition of Fe10.8Al89.2, Fe50Al50 and Fe80Al20 were mechanically
alloyed in a Spex 8000D Mixer/Mill for up to 96 h. The characterization of
Fe-Al powder mixtures was studied as a function of mechanical alloying time by
X-ray diffractometry and scanning electron microscopy. A fully amorphous phase
was not observed by X-ray diffraction for Fe10.8Al89.2 and Fe80Al20 even after
96 h mechanical alloying. However, X-ray diffraction observation showed that 50
h mechanical alloying of Fe50Al50 alloy resulted in a fully amorphous phase formation.




.

 





In order to determine the
amorphization time, Fe and Al elemental powder mixtures with composition of Fe10.8Al89.2, Fe50Al50 and Fe80Al20 were mechanically
alloyed in a Spex 8000D Mixer/Mill for up to 96 h. The characterization of
Fe-Al powder mixtures was studied as a function of mechanical alloying time by
X-ray diffractometry and scanning electron microscopy. A fully amorphous phase
was not observed by X-ray diffraction for Fe10.8Al89.2 and Fe80Al20 even after
96 h mechanical alloying. However, X-ray diffraction observation showed that 50
h mechanical alloying of Fe50Al50 alloy resulted in a fully amorphous phase formation.





.

Makale detayları

An Investigation Of Amorphization In Fe-Al Alloys During Mechanical Alloying

Yazarlar: Hakan GAŞAN | O.nuri ÇELİK | Nedret AYDINBEYLİ

Yayıncı: Eskişehir Osmangazi University

Ana Başlıklar: İmalat

Dergi: Journal of Engineering and Architecture Faculty of Eskisehir Osmangazi University 2008 Vol.21 Issue 1, pp.183-192

Belge Tipi: Makale

Yayın Tarihi: 6/2008

Belge Dili: Türkçe

Document ID (Org No.): 2000416571

eISSN: 2630-5712

Sayı

Yazarlar:

Hakan GAŞAN | O.nuri ÇELİK | Nedret AYDINBEYLİ

Yayıncı:

Eskişehir Osmangazi University

Ana Başlıklar:

İmalat

Dergi:

Journal of Engineering and Architecture Faculty of Eskisehir Osmangazi University 2008 Vol.21 Issue 1, pp.183-192

Belge Tipi:

Makale

Yayın Tarihi:

6/2008

Belge Dili:

Türkçe

Document ID (Org No.):

2000416571

eISSN:

2630-5712