The Effect of Different Paraffin-Waxes Used in Winding Process on Yarn Properties

Ayşe Türktaş Ali; Gonca Yıldız Pabuşçu; Timur Atik; Fatma Goktepe

Makale detayları

The Effect of Different Paraffin-Waxes Used in Winding Process on Yarn Properties

Yazarlar:

Ayşe Türktaş Ali | Gonca Yıldız Pabuşçu | Timur Atik | Fatma Goktepe

Yayıncı:

Tekirdag Namik Kemal University

Ana Başlıklar:

Mühendislik Uygulaması ve Eğitim (Diğer)

Dergi:

European Journal of Engineering and Applied Sciences Vol.7 Issue 2, pp.61-64

Belge Tipi:

Makale

Yayın Tarihi:

12/2024

Belge Dili:

Türkçe

Document ID (Org No.):

2001331268

pISSN:

2651-3412

Anahtar kelimeler:

Özet:

 Paraffin-waxing is a process that must be applied in knitting process to reduce the friction among knitting machine elements, especially between the yarn and needle. In knitting mills, yarn breaks may increase during knitting due to paraffin-related problems, thus production efficiency decreases while more dust and fly formation may occur in the environment. Therefore, it is important to use the appropriate paraffin-wax to solve these problems. In this study, two different types of ring-siro yarns as combed and melange yarns containing 100 cotton fibers were produced by applying different types of paraffin-waxes in winding process. For this purpose, 5 different commercial paraffin-waxes were supplied within the scope of the study and applied on the same yarns by using the same machine settings and same winding machine. Yarn properties, especially in terms of paraffin-wax uptake ratio and yarn friction coefficients, were compared and analysed. The properties of the yarns produced in the study were also discussed by comparing their performance before and after the heat-setting process.

 Paraffin-waxing is a process that must be applied in knitting process to reduce the friction among knitting machine elements, especially between the yarn and needle. In knitting mills, yarn breaks may increase during knitting due to paraffin-related problems, thus production efficiency decreases while more dust and fly formation may occur in the environment. Therefore, it is important to use the appropriate paraffin-wax to solve these problems. In this study, two different types of ring-siro yarns as combed and melange yarns containing 100 cotton fibers were produced by applying different types of paraffin-waxes in winding process. For this purpose, 5 different commercial paraffin-waxes were supplied within the scope of the study and applied on the same yarns by using the same machine settings and same winding machine. Yarn properties, especially in terms of paraffin-wax uptake ratio and yarn friction coefficients, were compared and analysed. The properties of the yarns produced in the study were also discussed by comparing their performance before and after the heat-setting process.

 Paraffin-waxing is a process that must be applied in knitting process to reduce the friction among knitting machine elements, especially between the yarn and needle. In knitting mills, yarn breaks may increase during knitting due to paraffin-related problems, thus production efficiency decreases while more dust and fly formation may occur in the environment. Therefore, it is important to use the appropriate paraffin-wax to solve these problems. In this study, two different types of ring-siro yarns as combed and melange yarns containing 100 cotton fibers were produced by applying different types of paraffin-waxes in winding process. For this purpose, 5 different commercial paraffin-waxes were supplied within the scope of the study and applied on the same yarns by using the same machine settings and same winding machine. Yarn properties, especially in terms of paraffin-wax uptake ratio and yarn friction coefficients, were compared and analysed. The properties of the yarns produced in the study were also discussed by comparing their performance before and after the heat-setting process.

 Parafinleme, örme işleminde iplik ve başta iğne olmak üzere örme makinası elemanları arasındaki sürtünmeyi azaltmak için uygulanması gerekli olan bir işlemdir. İplik işletmelerinde parafin kaynaklı sorunlar nedeniyle örme esnasında kopuşlar artabilmekte, dolayısıyla üretim randımanı düşmekte, ortamda normalden fazla toz ve uçuntu oluşabilmektedir. Söz konusu sorunların çözümü için uygun parafin türünün kullanılması önemli olmaktadır. Bu çalışmada bobinleme işleminde farklı parafinler uygulayarak iki farklı ring-siro iplik türü 100 pamuk, penye ve 100 melanj pamuk, penye üretilmiştir. Bu amaçla çalışma kapsamında 5 farklı ticari katı parafin çeşidi tedarik edilmiş ve aynı iplikler üzerinde, aynı makina ayarlarında ve aynı bobinleme makinasında çalışma yapılmıştır. Üretilen ipliklerin parafin alma oranı ve iplik sürtünme katsayısı özellikleri karşılaştırılarak analiz edilmiştir. Ayrıca üretilen ipliklerin özellikleri, fikse işlemi öncesi ve fikse işlemi sonrası karşılaştırılarak analiz edilmiştir.

Makale detayları

The Effect of Different Paraffin-Waxes Used in Winding Process on Yarn Properties

Yazarlar:

Ayşe Türktaş Ali | Gonca Yıldız Pabuşçu | Timur Atik | Fatma Goktepe

Yayıncı:

Tekirdag Namik Kemal University

Ana Başlıklar:

Mühendislik Uygulaması ve Eğitim (Diğer)

Dergi:

European Journal of Engineering and Applied Sciences Vol.7 Issue 2, pp.61-64

Belge Tipi:

Makale

Yayın Tarihi:

12/2024

Belge Dili:

Türkçe

Document ID (Org No.):

2001331268

pISSN:

2651-3412

Paraffin-wax

Yarn paraffin-waxing process

Yarn friction coefficient

Yarn windingParafin

İplik parafinleme işlemi

İplik sürtünme katsayısı

Bobinleme

Sayı

Makale detayları

Yazarlar: Ayşe Türktaş Ali | Gonca Yıldız Pabuşçu | Timur Atik | Fatma Goktepe

Yayıncı: Tekirdag Namik Kemal University

Ana Başlıklar: Mühendislik Uygulaması ve Eğitim (Diğer)

Dergi: European Journal of Engineering and Applied Sciences Vol.7 Issue 2, pp.61-64

Belge Tipi: Makale

Yayın Tarihi: 12/2024

Belge Dili: Türkçe

Document ID (Org No.): 2001331268

pISSN: 2651-3412

Sayı

Yazarlar:

Ayşe Türktaş Ali | Gonca Yıldız Pabuşçu | Timur Atik | Fatma Goktepe

Yayıncı:

Tekirdag Namik Kemal University

Ana Başlıklar:

Mühendislik Uygulaması ve Eğitim (Diğer)

Dergi:

European Journal of Engineering and Applied Sciences Vol.7 Issue 2, pp.61-64

Belge Tipi:

Makale

Yayın Tarihi:

12/2024

Belge Dili:

Türkçe

Document ID (Org No.):

2001331268

pISSN:

2651-3412