Evaluation of the effect of different fiber reinforced composite resins on the flexural strength of Bulk Fill composite resin

Ruşen Demir; Buket Ayna

Makale detayları

Evaluation of the effect of different fiber reinforced composite resins on the flexural strength of Bulk Fill composite resin

Yazarlar:

Ruşen Demir | Buket Ayna

Yayıncı:

Dicle University

Ana Başlıklar:

Paedodontics

Dergi:

Dicle Dental Journal Vol.25 Issue 3, pp.79-85

Belge Tipi:

Makale

Yayın Tarihi:

9/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001327510

pISSN:

2822-6755

Anahtar kelimeler:

Özet:

 Aims: The aim of this study was to evaluate the effect of reinforcing a Bulk Fill composite resin material with different fiber reinforced composite resins FRCRs on flexural strength. Methods: For the flexural strength test, 60 specimens were prepared using 4x4x8 mm polymethyl methacrylate PMMA blocks in accordance with the standards and the specimens were divided into four study groups Bulk Fill composite resin group 1, Bulk Fill composite resinglass fiber in braided structure group 2, Bulk Fill composite resinpolyethylene fiber in leno woven structure group 3, Bulk Fill composite resinshort glass fiber reinforced composite resin group 4. The specimens were soaked in distilled water at 37C for 24 hours and subjected to three-point bending test with Universal Test device. Data were statistically analyzed using Mann-Whitney U and Kruskal Wallis-H tests. Results: The average bending resistance values were 654.72 Newton N, 682.33 N, 643.87 N and 1003.91 N in groups 1, 2, 3 and 4, respectively. The effect of short glass fiber reinforced composite resinBulk Fill composite resin group on bending resistance was statistically significantly higher than all other groups p0.05. There was no statistically significant difference between the other groups in terms of flexural strength. Conclusion: Within the limits of this in vitro study, it was concluded that short glass fiber reinforced composite resin increases the flexural strength of Bulk Fill composite resin as a base material.

 Aims: The aim of this study was to evaluate the effect of reinforcing a Bulk Fill composite resin material with different fiber reinforced composite resins FRCRs on flexural strength. Methods: For the flexural strength test, 60 specimens were prepared using 4x4x8 mm polymethyl methacrylate PMMA blocks in accordance with the standards and the specimens were divided into four study groups Bulk Fill composite resin group 1, Bulk Fill composite resinglass fiber in braided structure group 2, Bulk Fill composite resinpolyethylene fiber in leno woven structure group 3, Bulk Fill composite resinshort glass fiber reinforced composite resin group 4. The specimens were soaked in distilled water at 37C for 24 hours and subjected to three-point bending test with Universal Test device. Data were statistically analyzed using Mann-Whitney U and Kruskal Wallis-H tests. Results: The average bending resistance values were 654.72 Newton N, 682.33 N, 643.87 N and 1003.91 N in groups 1, 2, 3 and 4, respectively. The effect of short glass fiber reinforced composite resinBulk Fill composite resin group on bending resistance was statistically significantly higher than all other groups p0.05. There was no statistically significant difference between the other groups in terms of flexural strength. Conclusion: Within the limits of this in vitro study, it was concluded that short glass fiber reinforced composite resin increases the flexural strength of Bulk Fill composite resin as a base material.

 Aims: The aim of this study was to evaluate the effect of reinforcing a Bulk Fill composite resin material with different fiber reinforced composite resins FRCRs on flexural strength. Methods: For the flexural strength test, 60 specimens were prepared using 4x4x8 mm polymethyl methacrylate PMMA blocks in accordance with the standards and the specimens were divided into four study groups Bulk Fill composite resin group 1, Bulk Fill composite resinglass fiber in braided structure group 2, Bulk Fill composite resinpolyethylene fiber in leno woven structure group 3, Bulk Fill composite resinshort glass fiber reinforced composite resin group 4. The specimens were soaked in distilled water at 37C for 24 hours and subjected to three-point bending test with Universal Test device. Data were statistically analyzed using Mann-Whitney U and Kruskal Wallis-H tests. Results: The average bending resistance values were 654.72 Newton N, 682.33 N, 643.87 N and 1003.91 N in groups 1, 2, 3 and 4, respectively. The effect of short glass fiber reinforced composite resinBulk Fill composite resin group on bending resistance was statistically significantly higher than all other groups p0.05. There was no statistically significant difference between the other groups in terms of flexural strength. Conclusion: Within the limits of this in vitro study, it was concluded that short glass fiber reinforced composite resin increases the flexural strength of Bulk Fill composite resin as a base material.

 Aims: The aim of this study was to evaluate the effect of reinforcing a Bulk Fill composite resin material with different fiber reinforced composite resins FRCRs on flexural strength. Methods: For the flexural strength test, 60 specimens were prepared using 4x4x8 mm polymethyl methacrylate PMMA blocks in accordance with the standards and the specimens were divided into four study groups Bulk Fill composite resin group 1, Bulk Fill composite resinglass fiber in braided structure group 2, Bulk Fill composite resinpolyethylene fiber in leno woven structure group 3, Bulk Fill composite resinshort glass fiber reinforced composite resin group 4. The specimens were soaked in distilled water at 37C for 24 hours and subjected to three-point bending test with Universal Test device. Data were statistically analyzed using Mann-Whitney U and Kruskal Wallis-H tests. Results: The average bending resistance values were 654.72 Newton N, 682.33 N, 643.87 N and 1003.91 N in groups 1, 2, 3 and 4, respectively. The effect of short glass fiber reinforced composite resinBulk Fill composite resin group on bending resistance was statistically significantly higher than all other groups p0.05. There was no statistically significant difference between the other groups in terms of flexural strength. Conclusion: Within the limits of this in vitro study, it was concluded that short glass fiber reinforced composite resin increases the flexural strength of Bulk Fill composite resin as a base material.

Makale detayları

Evaluation of the effect of different fiber reinforced composite resins on the flexural strength of Bulk Fill composite resin

Yazarlar:

Ruşen Demir | Buket Ayna

Yayıncı:

Dicle University

Ana Başlıklar:

Paedodontics

Dergi:

Dicle Dental Journal Vol.25 Issue 3, pp.79-85

Belge Tipi:

Makale

Yayın Tarihi:

9/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001327510

pISSN:

2822-6755

Excessive material loss

Bulk Fill composite resin

FRCR

fiber

three-point bending test

Sayı

Makale detayları

Evaluation of the effect of different fiber reinforced composite resins on the flexural strength of Bulk Fill composite resin

Yazarlar: Ruşen Demir | Buket Ayna

Yayıncı: Dicle University

Ana Başlıklar: Paedodontics

Dergi: Dicle Dental Journal Vol.25 Issue 3, pp.79-85

Belge Tipi: Makale

Yayın Tarihi: 9/2024

Belge Dili: İngilizce

Document ID (Org No.): 2001327510

pISSN: 2822-6755

Excessive material loss

Bulk Fill composite resin

FRCR

fiber

three-point bending test

Sayı

Yazarlar:

Ruşen Demir | Buket Ayna

Yayıncı:

Dicle University

Ana Başlıklar:

Paedodontics

Dergi:

Dicle Dental Journal Vol.25 Issue 3, pp.79-85

Belge Tipi:

Makale

Yayın Tarihi:

9/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001327510

pISSN:

2822-6755