Coffee Solution Effect on Color Differences of Resin Matrix Ceramics

Elif Çelik; Ahmet Serkan Küçükekenci

Makale detayları

Coffee Solution Effect on Color Differences of Resin Matrix Ceramics

Yazarlar:

Elif Çelik | Ahmet Serkan Küçükekenci

Yayıncı:

Zonguldak Bulent Ecevit University

Ana Başlıklar:

Diş Hekimliği

Dergi:

Journal of International Dental Sciences (Uluslararası Diş Hekimliği Bilimleri Dergisi) Vol.9 Issue 2, pp.98-105

Belge Tipi:

Makale

Yayın Tarihi:

8/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001297497

pISSN:

2149-8628

Anahtar kelimeler:

Özet:

 Objectives: This study aims to evaluate the effect of soaking in coffee solution on color differences after two polishing processes are applied to three different CADCAM ceramics with currently used resin matrix content. Materials and Methods: A total of 60 samples 1.5 mm  0.01 thickness of three different resin matrix CADCAM blocks polymer-infiltrated-ceramic-network VE, VITA Enamic, nanoparticle-filled ceramic LU, Lava Ultimate, composite resin nano-ceramic CE, Cerasmart were prepared n20. The prepared samples were divided into two subgroups according to the polishing process n10; While polishing rubber was applied to one group D, Diapol Twist, polishing discs were applied to the other group S, Sof-Lex Disc. The color values of the samples before L0, a0, b0 and after soaking in the coffee solution L1, a1, b1 were recorded in the CIE Lab color system with a spectrophotometer device Vita EasyShade. Color differences were calculated with the formula CIEDE2000 ΔE00. Then, the values were analyzed by two-way ANOVA and Tukeys multiple comparison tests. Results: As a result of the two-way analysis of variance, it was obtained that only the ceramic type effect significantly on the color differences p0.001. Although the samples polished with Sof-Lex discs in all ceramics showed less color difference than the Diapol Twist polishing rubber, there was no statistically significant difference between them p0.05. Each group showed a clinically unacceptable color differences value ΔE00 1.8. Statistically, the lowest color differences were obtained in the VE ceramics p0.05. The statistically higher color differences were observed in the CS ceramic groups than in other ceramics p0.05 except the LU_D group p0.05. Conclusion: After soaking in a coffee solution, the color of CS ceramic was more affected than other resin matrix ceramics.

 Objectives: This study aims to evaluate the effect of soaking in coffee solution on color differences after two polishing processes are applied to three different CADCAM ceramics with currently used resin matrix content. Materials and Methods: A total of 60 samples 1.5 mm  0.01 thickness of three different resin matrix CADCAM blocks polymer-infiltrated-ceramic-network VE, VITA Enamic, nanoparticle-filled ceramic LU, Lava Ultimate, composite resin nano-ceramic CE, Cerasmart were prepared n20. The prepared samples were divided into two subgroups according to the polishing process n10; While polishing rubber was applied to one group D, Diapol Twist, polishing discs were applied to the other group S, Sof-Lex Disc. The color values of the samples before L0, a0, b0 and after soaking in the coffee solution L1, a1, b1 were recorded in the CIE Lab color system with a spectrophotometer device Vita EasyShade. Color differences were calculated with the formula CIEDE2000 ΔE00. Then, the values were analyzed by two-way ANOVA and Tukeys multiple comparison tests. Results: As a result of the two-way analysis of variance, it was obtained that only the ceramic type effect significantly on the color differences p0.001. Although the samples polished with Sof-Lex discs in all ceramics showed less color difference than the Diapol Twist polishing rubber, there was no statistically significant difference between them p0.05. Each group showed a clinically unacceptable color differences value ΔE00 1.8. Statistically, the lowest color differences were obtained in the VE ceramics p0.05. The statistically higher color differences were observed in the CS ceramic groups than in other ceramics p0.05 except the LU_D group p0.05. Conclusion: After soaking in a coffee solution, the color of CS ceramic was more affected than other resin matrix ceramics.

 Objectives: This study aims to evaluate the effect of soaking in coffee solution on color differences after two polishing processes are applied to three different CADCAM ceramics with currently used resin matrix content. Materials and Methods: A total of 60 samples 1.5 mm  0.01 thickness of three different resin matrix CADCAM blocks polymer-infiltrated-ceramic-network VE, VITA Enamic, nanoparticle-filled ceramic LU, Lava Ultimate, composite resin nano-ceramic CE, Cerasmart were prepared n20. The prepared samples were divided into two subgroups according to the polishing process n10; While polishing rubber was applied to one group D, Diapol Twist, polishing discs were applied to the other group S, Sof-Lex Disc. The color values of the samples before L0, a0, b0 and after soaking in the coffee solution L1, a1, b1 were recorded in the CIE Lab color system with a spectrophotometer device Vita EasyShade. Color differences were calculated with the formula CIEDE2000 ΔE00. Then, the values were analyzed by two-way ANOVA and Tukeys multiple comparison tests. Results: As a result of the two-way analysis of variance, it was obtained that only the ceramic type effect significantly on the color differences p0.001. Although the samples polished with Sof-Lex discs in all ceramics showed less color difference than the Diapol Twist polishing rubber, there was no statistically significant difference between them p0.05. Each group showed a clinically unacceptable color differences value ΔE00 1.8. Statistically, the lowest color differences were obtained in the VE ceramics p0.05. The statistically higher color differences were observed in the CS ceramic groups than in other ceramics p0.05 except the LU_D group p0.05. Conclusion: After soaking in a coffee solution, the color of CS ceramic was more affected than other resin matrix ceramics.

 Amaç: Bu çalışmanın amacı; güncel olarak kullanılan üç farklı rezin matriks içerikli CADCAM seramiğe iki farklı polisaj işlemi uygulandıktan sonra kahve solüsyonda bekletmenin renk değişimine olan etkisini incelemektir. Gereç ve Yöntemler: Üç farklı rezin matriks CADCAM bloktan Polimer-infiltre ağ yapılı seramik VE, VITA Enamic, Rezin nanoseramik LU, Lava Ultimate, Nanopartikülle doldurulmuş nanoseramik CE, Cerasmart toplam 60 örnek 1.5 mm 0.01 kalınlıkta hazırlandı n20. Hazırlanan örnekler polisaj işlemine göre iki alt gruba ayrıldı n10. Birinci gruba polisaj lastiği uygulanırken D, Diapol Twist diğer gruba polisaj diskleri uygulandı S, Sof-Lex Disc. Örneklerin kahve solüsyonunda bekletmeden önceki L0, a0, b0 ve beklettikten sonraki renk değerleri L1, a1, b1 spektrofotometre cihazı Vita EasyShade ile CIE Lab renk sisteminde kaydedildi. Renk farklılıkları CIEDE2000 ΔE00 formülü ile hesaplandı. Elde edilen değerler iki yönlü varyans ANOVA ve Tukeys çoklu karşılaştırma testleri ile analiz edildi. Bulgular: İki yönlü varyans analizi sonucu sadece seramik tipinin renk değişikliği üzerine anlamlı farklılıklar oluşturduğu görüldü p0.001. Tüm seramiklerde Sof-Lex diskler ile polisaj işlemi yapılan örnekler Diapol Twist polisaj lastiği uygulanan örneklere göre daha az renk değişimi göstermesine rağmen aralarında istatistiksel olarak fark görülmemiştir p0.05. Bütün gruplarda klinik olarak kabul edilebilir değerin üzerinde renk değişikliği oluştuğu görüldü ΔE001.8. İstatistiksel olarak en az renk değişikliği VE gruplarında görüldü p0.05. CS seramik örneklere ait gruplarda diğer gruplara göre istatistiksel olarak daha fazla renk değişikliği görülmesine rağmen p0.05, LU_D grubu ile arasında istatistiksel olarak fark görülmedi p0.05. Sonuç: CS seramik kahve solüsyonunda bekletilmesi sonucu diğer rezin matriks seramiklere göre daha fazla renk değişimine uğramıştır.

Makale detayları

Coffee Solution Effect on Color Differences of Resin Matrix Ceramics

Yazarlar:

Elif Çelik | Ahmet Serkan Küçükekenci

Yayıncı:

Zonguldak Bulent Ecevit University

Ana Başlıklar:

Diş Hekimliği

Dergi:

Journal of International Dental Sciences (Uluslararası Diş Hekimliği Bilimleri Dergisi) Vol.9 Issue 2, pp.98-105

Belge Tipi:

Makale

Yayın Tarihi:

8/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001297497

pISSN:

2149-8628

Polishing

Color Stability

Resin Matrix.Parlatma

Renk Stabilitesi

Rezin matriks

Sayı

Makale detayları

Coffee Solution Effect on Color Differences of Resin Matrix Ceramics

Yazarlar: Elif Çelik | Ahmet Serkan Küçükekenci

Yayıncı: Zonguldak Bulent Ecevit University

Ana Başlıklar: Diş Hekimliği

Dergi: Journal of International Dental Sciences (Uluslararası Diş Hekimliği Bilimleri Dergisi) Vol.9 Issue 2, pp.98-105

Belge Tipi: Makale

Yayın Tarihi: 8/2023

Belge Dili: Türkçe

Document ID (Org No.): 2001297497

pISSN: 2149-8628

Polishing

Color Stability

Resin Matrix.Parlatma

Renk Stabilitesi

Rezin matriks

Sayı

Yazarlar:

Elif Çelik | Ahmet Serkan Küçükekenci

Yayıncı:

Zonguldak Bulent Ecevit University

Ana Başlıklar:

Diş Hekimliği

Dergi:

Journal of International Dental Sciences (Uluslararası Diş Hekimliği Bilimleri Dergisi) Vol.9 Issue 2, pp.98-105

Belge Tipi:

Makale

Yayın Tarihi:

8/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001297497

pISSN:

2149-8628