Experimental Investigation of Machinability of Filler Weld Applied to DIN 1.2379 Tool Steel by Milling Method

Yusuf Siyambaş

Makale detayları

Experimental Investigation of Machinability of Filler Weld Applied to DIN 1.2379 Tool Steel by Milling Method

Yazarlar:

Yusuf Siyambaş

Yayıncı:

Gazi University

Ana Başlıklar:

İmalat Süreçleri ve Teknolojileri

Dergi:

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji Vol.12 Issue 4, pp.936-944

Belge Tipi:

Makale

Yayın Tarihi:

12/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001337753

pISSN:

2147-9526

Anahtar kelimeler:

Özet:

 Multi-purpose designed and manufactured constructions may also wear out over time, and breakage or rupture may occur as a result of this wear. In terms of cost, it is more economical to produce these parts by the welded joining method instead of reproducing them. In this context, in this study, a filler welding process was performed on DIN 1.2379 cold work tool steel materials with a welded joining process. The surfaces formed as a result of the filling process were machined by the milling method on a CNC milling machine. The investigation revealed that when cutting speed increased, surface roughness levels reduced. The opposite was observed for the cutting forces with increasing cutting speed. It was found that feed rate had the greatest impact on both cutting force and surface roughness. Regression analysis was used to create prediction equations for surface roughness and cutting force, and the outcomes of the experiments and predictions were compared.

 Multi-purpose designed and manufactured constructions may also wear out over time, and breakage or rupture may occur as a result of this wear. In terms of cost, it is more economical to produce these parts by the welded joining method instead of reproducing them. In this context, in this study, a filler welding process was performed on DIN 1.2379 cold work tool steel materials with a welded joining process. The surfaces formed as a result of the filling process were machined by the milling method on a CNC milling machine. The investigation revealed that when cutting speed increased, surface roughness levels reduced. The opposite was observed for the cutting forces with increasing cutting speed. It was found that feed rate had the greatest impact on both cutting force and surface roughness. Regression analysis was used to create prediction equations for surface roughness and cutting force, and the outcomes of the experiments and predictions were compared.

 Multi-purpose designed and manufactured constructions may also wear out over time, and breakage or rupture may occur as a result of this wear. In terms of cost, it is more economical to produce these parts by the welded joining method instead of reproducing them. In this context, in this study, a filler welding process was performed on DIN 1.2379 cold work tool steel materials with a welded joining process. The surfaces formed as a result of the filling process were machined by the milling method on a CNC milling machine. The investigation revealed that when cutting speed increased, surface roughness levels reduced. The opposite was observed for the cutting forces with increasing cutting speed. It was found that feed rate had the greatest impact on both cutting force and surface roughness. Regression analysis was used to create prediction equations for surface roughness and cutting force, and the outcomes of the experiments and predictions were compared.

 Multi-purpose designed and manufactured constructions may also wear out over time, and breakage or rupture may occur as a result of this wear. In terms of cost, it is more economical to produce these parts by the welded joining method instead of reproducing them. In this context, in this study, a filler welding process was performed on DIN 1.2379 cold work tool steel materials with a welded joining process. The surfaces formed as a result of the filling process were machined by the milling method on a CNC milling machine. The investigation revealed that when cutting speed increased, surface roughness levels reduced. The opposite was observed for the cutting forces with increasing cutting speed. It was found that feed rate had the greatest impact on both cutting force and surface roughness. Regression analysis was used to create prediction equations for surface roughness and cutting force, and the outcomes of the experiments and predictions were compared.

Makale detayları

Experimental Investigation of Machinability of Filler Weld Applied to DIN 1.2379 Tool Steel by Milling Method

Yazarlar:

Yusuf Siyambaş

Yayıncı:

Gazi University

Ana Başlıklar:

İmalat Süreçleri ve Teknolojileri

Dergi:

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji Vol.12 Issue 4, pp.936-944

Belge Tipi:

Makale

Yayın Tarihi:

12/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001337753

pISSN:

2147-9526

Filler welding

cutting force

surface roughness

regression analysis

Sayı

Makale detayları

Experimental Investigation of Machinability of Filler Weld Applied to DIN 1.2379 Tool Steel by Milling Method

Yazarlar: Yusuf Siyambaş

Yayıncı: Gazi University

Ana Başlıklar: İmalat Süreçleri ve Teknolojileri

Dergi: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji Vol.12 Issue 4, pp.936-944

Belge Tipi: Makale

Yayın Tarihi: 12/2024

Belge Dili: İngilizce

Document ID (Org No.): 2001337753

pISSN: 2147-9526

Filler welding

cutting force

surface roughness

regression analysis

Sayı

Yazarlar:

Yusuf Siyambaş

Yayıncı:

Gazi University

Ana Başlıklar:

İmalat Süreçleri ve Teknolojileri

Dergi:

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji Vol.12 Issue 4, pp.936-944

Belge Tipi:

Makale

Yayın Tarihi:

12/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001337753

pISSN:

2147-9526