Çelik Tel Donatılı Betonların Kırılma Parametrelerinin Yapay Sinir Ağları ile Modellenmesi

Yuşa ŞAHİN; Yunus GÜNDÜZ; Eyüp TAŞKAN

Makale detayları

Çelik Tel Donatılı Betonların Kırılma Parametrelerinin Yapay Sinir Ağları ile Modellenmesi

Yazarlar:

Yuşa ŞAHİN | Yunus GÜNDÜZ | Eyüp TAŞKAN

Yayıncı:

Kirikkale University

Ana Başlıklar:

Uygulamalı fizik

Dergi:

International Journal of Engineering Research and Development 2020 Vol.12 Issue 2, pp.457-463

Belge Tipi:

Makale

Yayın Tarihi:

6/2020

Belge Dili:

Türkçe

Document ID (Org No.):

2000646841

Sıklık:

İki Yıllık

eISSN:

1308-5514

Özet:

 


Concrete exhibits higher strength under
compression loads, however, it does not provide sufficient performance under tension
loads. Short cut steel fibers are usually added in concrete in order to defeat
this disadvantage against tension loads. Besides tension strength, also
ductility and toughness of concretes are increased by addition of steel fibers
in concrete. Effects of the properties of the fibers on concretes were
investigated and some parameters were suggested to use in the design of Steel
Fiber Reinforced Concretes (SFRCs). Fracture parameters are taken as a
criterion in the design of SFRCs due to their more ductile behavior. In this
study, the effect of type and amount of hooked-ended steel fibers on the
fracture parameters of concretes was investigated by an experimental research.
In mixtures, different types of hooked-ended steel fibers added in different amounts
in concretes having different strength class. The three-point bending test was
performed on concretes and fracture parameters were determined according to
this test. Fracture parameters of SFRCs were modelled based on the experimental
results by an Artificial Neural Network (ANN). It is revealed that fracture
parameters were successfully predicted by this model.

.

Makale detayları

Çelik Tel Donatılı Betonların Kırılma Parametrelerinin Yapay Sinir Ağları ile Modellenmesi

Yazarlar: Yuşa ŞAHİN | Yunus GÜNDÜZ | Eyüp TAŞKAN

Yayıncı: Kirikkale University

Ana Başlıklar: Uygulamalı fizik

Dergi: International Journal of Engineering Research and Development 2020 Vol.12 Issue 2, pp.457-463

Belge Tipi: Makale

Yayın Tarihi: 6/2020

Belge Dili: Türkçe

Document ID (Org No.): 2000646841

Sıklık: İki Yıllık

eISSN: 1308-5514

Sayı

Yazarlar:

Yuşa ŞAHİN | Yunus GÜNDÜZ | Eyüp TAŞKAN

Yayıncı:

Kirikkale University

Ana Başlıklar:

Uygulamalı fizik

Dergi:

International Journal of Engineering Research and Development 2020 Vol.12 Issue 2, pp.457-463

Belge Tipi:

Makale

Yayın Tarihi:

6/2020

Belge Dili:

Türkçe

Document ID (Org No.):

2000646841

Sıklık:

İki Yıllık

eISSN:

1308-5514