REDUCTİON OF SHAKİNG FORCES OF CNC CUTTİNG MACHİNE MAİN MOTİON SYSTEM AND STRUCTURAL ANALYSİS OF CONNECTİNG ROD

Gürcan Atakök; Sezgin Balci

Makale detayları

REDUCTİON OF SHAKİNG FORCES OF CNC CUTTİNG MACHİNE MAİN MOTİON SYSTEM AND STRUCTURAL ANALYSİS OF CONNECTİNG ROD

Yazarlar:

Gürcan Atakök | Sezgin Balci

Yayıncı:

Süleyman Demirel University

Ana Başlıklar:

Makine Mühendisliği

Dergi:

Mühendislik Bilimleri ve Tasarım Dergisi Vol.11 Issue 4, pp.1580-1593

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001307550

pISSN:

1308-6693

Anahtar kelimeler:

Özet:

 Cutter systems and other motion systems designed by taking advantage of the crank-connecting rod mechanisms find a wide range of uses. In order to increase the cutting performance of the CNC cutting machine, which is designed to cut multi-ply textile products, it is necessary to increase the speed. However, the increase in speed brings along dynamic balancing problems in rotating mechanisms. In this study, a mechanism that can cut at speeds of 6000 rpm was designed and modeled in CAD program, balancing work for reducing shaking forces was made and analyzed in engineering simulation program. The results show that the balancing weight reduces the shaking forces in critical bearings.

 Cutter systems and other motion systems designed by taking advantage of the crank-connecting rod mechanisms find a wide range of uses. In order to increase the cutting performance of the CNC cutting machine, which is designed to cut multi-ply textile products, it is necessary to increase the speed. However, the increase in speed brings along dynamic balancing problems in rotating mechanisms. In this study, a mechanism that can cut at speeds of 6000 rpm was designed and modeled in CAD program, balancing work for reducing shaking forces was made and analyzed in engineering simulation program. The results show that the balancing weight reduces the shaking forces in critical bearings.

 Cutter systems and other motion systems designed by taking advantage of the crank-connecting rod mechanisms find a wide range of uses. In order to increase the cutting performance of the CNC cutting machine, which is designed to cut multi-ply textile products, it is necessary to increase the speed. However, the increase in speed brings along dynamic balancing problems in rotating mechanisms. In this study, a mechanism that can cut at speeds of 6000 rpm was designed and modeled in CAD program, balancing work for reducing shaking forces was made and analyzed in engineering simulation program. The results show that the balancing weight reduces the shaking forces in critical bearings.

 Krank-biyel mekanizmalarının avantajlarından faydalanılarak tasarlanan kesici sistemler ve diğer hareket sistemleri geniş bir yelpazede kullanım alanı bulmaktadır. Çok katlı serilen tekstil ürünlerini kesmek üzere tasarlanan CNC kesim makinesinin kesim performansının istenen seviyeye gelmesi için hızın artırılması gereklidir. Ancak hızın artması dönen mekanizmalarda dinamik dengeleme problemlerini de beraberinde getirir. Bu çalışmada 6000 ddk. hızlarda kesim yapabilecek bir mekanizma CAD programında tasarlanıp modellenmiş; sarsma kuvvetlerinin azaltılmasına yönelik dengeleme çalışması da analiz programında test edilmiştir. Dengeleme ağırlığının, kritik rulmanlardaki sarsma kuvvetlerini düşürdüğü sonucu elde edilmiştir.

Makale detayları

REDUCTİON OF SHAKİNG FORCES OF CNC CUTTİNG MACHİNE MAİN MOTİON SYSTEM AND STRUCTURAL ANALYSİS OF CONNECTİNG ROD

Yazarlar:

Gürcan Atakök | Sezgin Balci

Yayıncı:

Süleyman Demirel University

Ana Başlıklar:

Makine Mühendisliği

Dergi:

Mühendislik Bilimleri ve Tasarım Dergisi Vol.11 Issue 4, pp.1580-1593

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001307550

pISSN:

1308-6693

CNC Cutting Machine

Crank-Connecting Rod

Mass Balancing

Shaking Forces

Structural AnalysisCNC Kesim Makinesi

Krank-Biyel

Kütle Dengeleme

Sarsma Kuvvetleri

Yapısal Analiz

Sayı

Makale detayları

Yazarlar: Gürcan Atakök | Sezgin Balci

Yayıncı: Süleyman Demirel University

Ana Başlıklar: Makine Mühendisliği

Dergi: Mühendislik Bilimleri ve Tasarım Dergisi Vol.11 Issue 4, pp.1580-1593

Belge Tipi: Makale

Yayın Tarihi: 12/2023

Belge Dili: Türkçe

Document ID (Org No.): 2001307550

pISSN: 1308-6693

Sayı

Yazarlar:

Gürcan Atakök | Sezgin Balci

Yayıncı:

Süleyman Demirel University

Ana Başlıklar:

Makine Mühendisliği

Dergi:

Mühendislik Bilimleri ve Tasarım Dergisi Vol.11 Issue 4, pp.1580-1593

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001307550

pISSN:

1308-6693