Examining the Effect of Digital Manufacturing and Traditional Building Construction Techniques on the Building Production Process

Kübra Sümer Haydaraslan

Makale detayları

Examining the Effect of Digital Manufacturing and Traditional Building Construction Techniques on the Building Production Process

Yazarlar:

Kübra Sümer Haydaraslan

Yayıncı:

Sivas Cumhuriyet University

Ana Başlıklar:

Mimari Mühendislik

Dergi:

Sivas Cumhuriyet Üniversitesi Bilim ve Teknoloji Dergisi Vol.3 Issue 1, pp.1-13

Belge Tipi:

Makale

Yayın Tarihi:

2/2024

Belge Dili:

Türkçe

Document ID (Org No.):

2001322288

pISSN:

2980-0110

Anahtar kelimeler:

Özet:

 Adapting new technologies to the construction industry is slower than in other sectors. Labor productivity has remained stable relative to other industries over the last two decades. Therefore, due to rapid population growth, more housing needs is needed. The industry needs to improve its performance against current and future demands. Building production with digital fabrication techniques has the potential to speed up the building construction process. In addition, this technique is important in that it allows production with on-site and sustainable materials. The most used digital production technique in buildings is additive manufacturing technology. This study aims to examine the advantages and disadvantages of using additive manufacturing technologies in building construction compared to traditional construction techniques. At the end of the study, it was concluded that although digital production techniques have great potential in building construction, problems still need to be solved. The need to develop standards in building construction, especially with digital production techniques, is seen as the biggest obstacle to its widespread use in building construction.

 Adapting new technologies to the construction industry is slower than in other sectors. Labor productivity has remained stable relative to other industries over the last two decades. Therefore, due to rapid population growth, more housing needs is needed. The industry needs to improve its performance against current and future demands. Building production with digital fabrication techniques has the potential to speed up the building construction process. In addition, this technique is important in that it allows production with on-site and sustainable materials. The most used digital production technique in buildings is additive manufacturing technology. This study aims to examine the advantages and disadvantages of using additive manufacturing technologies in building construction compared to traditional construction techniques. At the end of the study, it was concluded that although digital production techniques have great potential in building construction, problems still need to be solved. The need to develop standards in building construction, especially with digital production techniques, is seen as the biggest obstacle to its widespread use in building construction.

 Adapting new technologies to the construction industry is slower than in other sectors. Labor productivity has remained stable relative to other industries over the last two decades. Therefore, due to rapid population growth, more housing needs is needed. The industry needs to improve its performance against current and future demands. Building production with digital fabrication techniques has the potential to speed up the building construction process. In addition, this technique is important in that it allows production with on-site and sustainable materials. The most used digital production technique in buildings is additive manufacturing technology. This study aims to examine the advantages and disadvantages of using additive manufacturing technologies in building construction compared to traditional construction techniques. At the end of the study, it was concluded that although digital production techniques have great potential in building construction, problems still need to be solved. The need to develop standards in building construction, especially with digital production techniques, is seen as the biggest obstacle to its widespread use in building construction.

 Yeni teknolojilerin inşaat sektörüne adaptasyonu diğer sektörlere göre daha yavaştır. İş gücü verimliliği ise diğer sektörlere kıyasla son yirmi yılda sabit kalmıştır. Bu nedenle hızlı nüfus artışından kaynaklı barınma ihtiyacı karşılanamamaktadır. Sektörün şu anda ve gelecekte olan talepleri karşılayabilmesi için performansını artırması gerekmektedir. Dijital fabrikasyon teknikleri ile bina üretimi, bina inşa sürecini hızlandırma konusunda potansiyele sahiptir. Ayrıca yerinde ve sürdürülebilir malzemeler ile üretime imkan vermesi açısından büyük önem taşımaktadır. Bina sektöründe kullanılan dijital fabrikasyon tekniklerinden binalarda en yaygın kullanılan teknoloji eklemeli imalat teknolojileridir. Bu çalışmada binaların daha hızlı inşa edilmesinde eklemeli imalat teknolojileri kullanımının geleneksel inşa yöntemlerine göre avantajlı ve dezavantajlı olduğu durumların incelenmesi amaçlanmıştır. Çalışmada, geleneksel inşa yöntemleri ile eklemeli imalat inşa yöntemleri; sürdürülebilirlik, statik, maliyet ve üretim esnekliği parametreleri açısından karşılaştırmalı olarak incelenmiştir. Çalışmanın sonunda eklemeli imalat tekniklerinin, bina inşasında birçok potansiyele sahip olsa da henüz çözülmemiş sorunları bulunduğuna ulaşılmıştır. Özellikle tekniğin bina inşası konusunda standartlarının gelişmemiş olması, bina inşasında yaygınlaşmasının önündeki en büyük engel olarak görülmektedir.

Makale detayları

Examining the Effect of Digital Manufacturing and Traditional Building Construction Techniques on the Building Production Process

Yazarlar:

Kübra Sümer Haydaraslan

Yayıncı:

Sivas Cumhuriyet University

Ana Başlıklar:

Mimari Mühendislik

Dergi:

Sivas Cumhuriyet Üniversitesi Bilim ve Teknoloji Dergisi Vol.3 Issue 1, pp.1-13

Belge Tipi:

Makale

Yayın Tarihi:

2/2024

Belge Dili:

Türkçe

Document ID (Org No.):

2001322288

pISSN:

2980-0110

Building construction

Digital fabrication techniques

Digital construction

Additive manufacturing

Construction technologyBina inşası

Dijital fabrikasyon teknikleri

Dijital inşaat

Eklemeli imalat

İnşaat teknolojisi

Sayı

Makale detayları

Yazarlar: Kübra Sümer Haydaraslan

Yayıncı: Sivas Cumhuriyet University

Ana Başlıklar: Mimari Mühendislik

Dergi: Sivas Cumhuriyet Üniversitesi Bilim ve Teknoloji Dergisi Vol.3 Issue 1, pp.1-13

Belge Tipi: Makale

Yayın Tarihi: 2/2024

Belge Dili: Türkçe

Document ID (Org No.): 2001322288

pISSN: 2980-0110

Sayı

Yazarlar:

Kübra Sümer Haydaraslan

Yayıncı:

Sivas Cumhuriyet University

Ana Başlıklar:

Mimari Mühendislik

Dergi:

Sivas Cumhuriyet Üniversitesi Bilim ve Teknoloji Dergisi Vol.3 Issue 1, pp.1-13

Belge Tipi:

Makale

Yayın Tarihi:

2/2024

Belge Dili:

Türkçe

Document ID (Org No.):

2001322288

pISSN:

2980-0110