Multi-Objective Optimization of Selected Mechanical  Properties of Basalt, Carbon Fabric Reinforced Particle Additive Composites

Emel Ceyhun Sabır; Çiğdem Sarpkaya; Ertan Özgür

Makale detayları

Multi-Objective Optimization of Selected Mechanical Properties of Basalt, Carbon Fabric Reinforced Particle Additive Composites

Yazarlar:

Emel Ceyhun Sabır | Çiğdem Sarpkaya | Ertan Özgür

Yayıncı:

Ege University

Ana Başlıklar:

Wearable Materials | Composite and Hybrid Materials

Dergi:

Textile and Apparel Vol.34 Issue 3, pp.211-221

Belge Tipi:

Makale

Yayın Tarihi:

9/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001328751

pISSN:

1300-3356

Anahtar kelimeler:

Özet:

 In this study, some of the mechanical properties of basalt fabric and carbon fabric reinforced particle additive composite materials were investigated. The effect of fabric additive ratios on tensile strength, Izod pendulum impact resistance, and three point bending properties has been tried to be revealed. In order to determine the composite material that gives the optimum mechanical properties, Taguchi Grey Relational Analysis Taguchi based GRA method was chosen as multi-objective optimization method and used L18 Mixed 3-6 Level experimental design. Input variables-factors were determined as fabric 6 levels, Al2O3 additive 3 levels and SiC additive 3 levels according to the design. Tensile strength, impact resistance, and three point bending were selected as response variables. These three tests were optimized. The optimum composite combination was determined and found 30 carbon fabric, 4 Al2O3 and 0 SiC. The improvement by using confirmation test was seen as 0,07 when the 3rd experiment plan was selected as the initial process parameter.

 In this study, some of the mechanical properties of basalt fabric and carbon fabric reinforced particle additive composite materials were investigated. The effect of fabric additive ratios on tensile strength, Izod pendulum impact resistance, and three point bending properties has been tried to be revealed. In order to determine the composite material that gives the optimum mechanical properties, Taguchi Grey Relational Analysis Taguchi based GRA method was chosen as multi-objective optimization method and used L18 Mixed 3-6 Level experimental design. Input variables-factors were determined as fabric 6 levels, Al2O3 additive 3 levels and SiC additive 3 levels according to the design. Tensile strength, impact resistance, and three point bending were selected as response variables. These three tests were optimized. The optimum composite combination was determined and found 30 carbon fabric, 4 Al2O3 and 0 SiC. The improvement by using confirmation test was seen as 0,07 when the 3rd experiment plan was selected as the initial process parameter.

 In this study, some of the mechanical properties of basalt fabric and carbon fabric reinforced particle additive composite materials were investigated. The effect of fabric additive ratios on tensile strength, Izod pendulum impact resistance, and three point bending properties has been tried to be revealed. In order to determine the composite material that gives the optimum mechanical properties, Taguchi Grey Relational Analysis Taguchi based GRA method was chosen as multi-objective optimization method and used L18 Mixed 3-6 Level experimental design. Input variables-factors were determined as fabric 6 levels, Al2O3 additive 3 levels and SiC additive 3 levels according to the design. Tensile strength, impact resistance, and three point bending were selected as response variables. These three tests were optimized. The optimum composite combination was determined and found 30 carbon fabric, 4 Al2O3 and 0 SiC. The improvement by using confirmation test was seen as 0,07 when the 3rd experiment plan was selected as the initial process parameter.

 In this study, some of the mechanical properties of basalt fabric and carbon fabric reinforced particle additive composite materials were investigated. The effect of fabric additive ratios on tensile strength, Izod pendulum impact resistance, and three point bending properties has been tried to be revealed. In order to determine the composite material that gives the optimum mechanical properties, Taguchi Grey Relational Analysis Taguchi based GRA method was chosen as multi-objective optimization method and used L18 Mixed 3-6 Level experimental design. Input variables-factors were determined as fabric 6 levels, Al2O3 additive 3 levels and SiC additive 3 levels according to the design. Tensile strength, impact resistance, and three point bending were selected as response variables. These three tests were optimized. The optimum composite combination was determined and found 30 carbon fabric, 4 Al2O3 and 0 SiC. The improvement by using confirmation test was seen as 0,07 when the 3rd experiment plan was selected as the initial process parameter.

Makale detayları

Multi-Objective Optimization of Selected Mechanical Properties of Basalt, Carbon Fabric Reinforced Particle Additive Composites

Yazarlar:

Emel Ceyhun Sabır | Çiğdem Sarpkaya | Ertan Özgür

Yayıncı:

Ege University

Ana Başlıklar:

Wearable Materials | Composite and Hybrid Materials

Dergi:

Textile and Apparel Vol.34 Issue 3, pp.211-221

Belge Tipi:

Makale

Yayın Tarihi:

9/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001328751

pISSN:

1300-3356

Basalt and carbon fabric

Al2O3 and SiC additives

composite

mechanical properties

multi-objective optimization

Sayı

Makale detayları

Multi-Objective Optimization of Selected Mechanical Properties of Basalt, Carbon Fabric Reinforced Particle Additive Composites

Yazarlar: Emel Ceyhun Sabır | Çiğdem Sarpkaya | Ertan Özgür

Yayıncı: Ege University

Ana Başlıklar: Wearable Materials | Composite and Hybrid Materials

Dergi: Textile and Apparel Vol.34 Issue 3, pp.211-221

Belge Tipi: Makale

Yayın Tarihi: 9/2024

Belge Dili: İngilizce

Document ID (Org No.): 2001328751

pISSN: 1300-3356

Basalt and carbon fabric

Al2O3 and SiC additives

composite

mechanical properties

multi-objective optimization

Sayı

Yazarlar:

Emel Ceyhun Sabır | Çiğdem Sarpkaya | Ertan Özgür

Yayıncı:

Ege University

Ana Başlıklar:

Wearable Materials | Composite and Hybrid Materials

Dergi:

Textile and Apparel Vol.34 Issue 3, pp.211-221

Belge Tipi:

Makale

Yayın Tarihi:

9/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001328751

pISSN:

1300-3356