EFFECT OF TITANIUM DIOXIDE AND TALC ON THE TENSILE STRENGTH OF COMPOSITE MATERIAL

Ertunga Direk; Muhammet Ceylan

Makale detayları

EFFECT OF TITANIUM DIOXIDE AND TALC ON THE TENSILE STRENGTH OF COMPOSITE MATERIAL

Yazarlar:

Ertunga Direk | Muhammet Ceylan

Yayıncı:

Istanbul Ticaret University

Ana Başlıklar:

Mühendislik

Dergi:

İstanbul Ticaret Üniversitesi Teknoloji ve Uygulamalı Bilimler Dergisi Vol.5 Issue 2, pp.41-48

Belge Tipi:

Makale

Yayın Tarihi:

2/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001281279

pISSN:

2645-8969

Anahtar kelimeler:

Özet:

 Epoxy was incorporated with titanium dioxide and talc at different concentrations 0, 0.5, 1, 2, and 4 wt, and then that mixture was combined with carbon fiber via a hand lay-up process. The mechanical properties of the composites were determined using universal tensile testing. The tensile test results revealed that the mechanical properties of the polymer matrix composites were increased as a function of talc and titanium dioxide concentrations. The best tensile strength of the composite was obtained from the 0.5 talc and 1 titanium dioxide sides. Increasing the weight ratio of talc 1, 2, and 4 and 0.5, 2, and 4 of titanium dioxide in composite production doesnt exhibit a significant difference. Tensile testing behavior of talc and titanium dioxide reinforced composite specimens shows better results compared to unreinforced carbon fiber composites. As a result, this study provides a detailed explanation of how to improve the strength of carbon fiber composites.

 Epoxy was incorporated with titanium dioxide and talc at different concentrations 0, 0.5, 1, 2, and 4 wt, and then that mixture was combined with carbon fiber via a hand lay-up process. The mechanical properties of the composites were determined using universal tensile testing. The tensile test results revealed that the mechanical properties of the polymer matrix composites were increased as a function of talc and titanium dioxide concentrations. The best tensile strength of the composite was obtained from the 0.5 talc and 1 titanium dioxide sides. Increasing the weight ratio of talc 1, 2, and 4 and 0.5, 2, and 4 of titanium dioxide in composite production doesnt exhibit a significant difference. Tensile testing behavior of talc and titanium dioxide reinforced composite specimens shows better results compared to unreinforced carbon fiber composites. As a result, this study provides a detailed explanation of how to improve the strength of carbon fiber composites.

 Epoxy was incorporated with titanium dioxide and talc at different concentrations 0, 0.5, 1, 2, and 4 wt, and then that mixture was combined with carbon fiber via a hand lay-up process. The mechanical properties of the composites were determined using universal tensile testing. The tensile test results revealed that the mechanical properties of the polymer matrix composites were increased as a function of talc and titanium dioxide concentrations. The best tensile strength of the composite was obtained from the 0.5 talc and 1 titanium dioxide sides. Increasing the weight ratio of talc 1, 2, and 4 and 0.5, 2, and 4 of titanium dioxide in composite production doesnt exhibit a significant difference. Tensile testing behavior of talc and titanium dioxide reinforced composite specimens shows better results compared to unreinforced carbon fiber composites. As a result, this study provides a detailed explanation of how to improve the strength of carbon fiber composites.

 Epoksi, titanyum dioksit ve talk ile farklı konsantrasyonlarda ağırlıkça 0, 0,5, 1, 2 ve 4 oranında dahil edildi ve daha sonra bu karışım elle yatırma işlemi ile karbon fiber ile birleştirildi. Elde edilen kompozitlerin mekanik özellikleri, evrensel çekme testi kullanılarak belirlendi. Çekme test sonuçları, polimer matrisli kompozitlerin mekanik özelliklerinin talk ve titanyum dioksit konsantrasyonlarının bir fonksiyonu olarak arttığını ortaya koydu. Kompozitin en iyi çekme mukavemeti 0.5 talk ve 1 titanyum dioksitten elde edilmiştir. Kompozit üretiminde talkın 1, 2 ve 4 ve titanyum dioksitin 0.5, 2 ve 4 ağırlık oranlarının arttırılması önemli bir farklılık göstermemektedir. Talk ve titanyum dioksit takviyeli kompozit numunelerin çekme testi davranışı, takviye edilmemiş karbon fiber kompozitlere kıyasla daha iyi sonuçlar göstermektedir. Sonuç olarak, bu çalışma, karbon fiber kompozitlerin mukavemetinin nasıl iyileştirilebileceğine dair ayrıntılı bir açıklama sunmaktadır.

Makale detayları

EFFECT OF TITANIUM DIOXIDE AND TALC ON THE TENSILE STRENGTH OF COMPOSITE MATERIAL

Yazarlar:

Ertunga Direk | Muhammet Ceylan

Yayıncı:

Istanbul Ticaret University

Ana Başlıklar:

Mühendislik

Dergi:

İstanbul Ticaret Üniversitesi Teknoloji ve Uygulamalı Bilimler Dergisi Vol.5 Issue 2, pp.41-48

Belge Tipi:

Makale

Yayın Tarihi:

2/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001281279

pISSN:

2645-8969

Composite

Carbon Fiber

Titanium Dioxide

Talc

Tensile Test

Kompozit

Karbon Fiber

Titanyum Dioksit

Talk

Çekme Testi

Sayı

Makale detayları

Yazarlar: Ertunga Direk | Muhammet Ceylan

Yayıncı: Istanbul Ticaret University

Ana Başlıklar: Mühendislik

Dergi: İstanbul Ticaret Üniversitesi Teknoloji ve Uygulamalı Bilimler Dergisi Vol.5 Issue 2, pp.41-48

Belge Tipi: Makale

Yayın Tarihi: 2/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001281279

pISSN: 2645-8969

Sayı

Yazarlar:

Ertunga Direk | Muhammet Ceylan

Yayıncı:

Istanbul Ticaret University

Ana Başlıklar:

Mühendislik

Dergi:

İstanbul Ticaret Üniversitesi Teknoloji ve Uygulamalı Bilimler Dergisi Vol.5 Issue 2, pp.41-48

Belge Tipi:

Makale

Yayın Tarihi:

2/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001281279

pISSN:

2645-8969