Linear switched reluctance motor control with PIC18F452 microcontroller

Mahir DURSUN; Fatmagül KOÇ

Makale detayları

Linear switched reluctance motor control with PIC18F452 microcontroller

Yazarlar:

Mahir DURSUN | Fatmagül KOÇ

Yayıncı:

TUBITAK

Dergi:

Turkish Journal of Electrical Engineering and Computer Science 2013 Vol.21 Issue 4, pp.1107-1119

Belge Tipi:

Makale

Yayın Tarihi:

3/2013

Belge Dili:

Türkçe

Document ID (Org No.):

2000743271

Sıklık:

İki Aylık

eISSN:

1303-6203

pISSN:

1300-0632

Özet:

 

This paper presents the simulation, control, and  experimental results of the velocity of a double-sided, 6/4-poled,  3-phased, 8 A, 24 V, 250 W, and 250 N pull force linear switched  reluctance motor (LSRM).  In the simulation and experimental study,  the reference velocity is constant depending on the position and time.  The velocity versus the position of the translator was controlled with  fuzzy logic control (FLC) and proportional-integral (PI) control  techniques.  The motor was controlled by PI control method with a  PIC18F452 microcontroller due to its low cost.  The results of the  velocity of a translator were compared with the simulation results of  the PI control and FLC techniques.  It was seen that the PIC18F452  microcontroller is sufficient in the velocity control of the LSRM, and  in the FLC method, the force and velocity ripples are lower than in  the PI control method.

 

This paper presents the simulation, control, and  experimental results of the velocity of a double-sided, 6/4-poled,  3-phased, 8 A, 24 V, 250 W, and 250 N pull force linear switched  reluctance motor (LSRM).  In the simulation and experimental study,  the reference velocity is constant depending on the position and time.  The velocity versus the position of the translator was controlled with  fuzzy logic control (FLC) and proportional-integral (PI) control  techniques.  The motor was controlled by PI control method with a  PIC18F452 microcontroller due to its low cost.  The results of the  velocity of a translator were compared with the simulation results of  the PI control and FLC techniques.  It was seen that the PIC18F452  microcontroller is sufficient in the velocity control of the LSRM, and  in the FLC method, the force and velocity ripples are lower than in  the PI control method.

Makale detayları

Linear switched reluctance motor control with PIC18F452 microcontroller

Yazarlar: Mahir DURSUN | Fatmagül KOÇ

Yayıncı: TUBITAK

Dergi: Turkish Journal of Electrical Engineering and Computer Science 2013 Vol.21 Issue 4, pp.1107-1119

Belge Tipi: Makale

Yayın Tarihi: 3/2013

Belge Dili: Türkçe

Document ID (Org No.): 2000743271

Sıklık: İki Aylık

eISSN: 1303-6203

pISSN: 1300-0632

Sayı

Yazarlar:

Mahir DURSUN | Fatmagül KOÇ

Yayıncı:

TUBITAK

Dergi:

Turkish Journal of Electrical Engineering and Computer Science 2013 Vol.21 Issue 4, pp.1107-1119

Belge Tipi:

Makale

Yayın Tarihi:

3/2013

Belge Dili:

Türkçe

Document ID (Org No.):

2000743271

Sıklık:

İki Aylık

eISSN:

1303-6203

pISSN:

1300-0632