Evaluation of The Effects of Cutting Parameters On The Surface Roughness During The Turning of Hadfield Steel With Response Surface Methodology

Ergün EKİCİ; Gültekin UZUN; Turgay KIVAK

doi:https://doi.org/10.17482/uujfe.38441

Makale detayları

Evaluation of The Effects of Cutting Parameters On The Surface Roughness During The Turning of Hadfield Steel With Response Surface Methodology

Yazarlar:

Ergün EKİCİ | Gültekin UZUN | Turgay KIVAK

Yayıncı:

Bursa Uludağ University

Dergi:

Uludağ University Journal of The Faculty of Engineering 2014 Vol.19 Issue 2, pp.19-28

Belge Tipi:

Makale

Yayın Tarihi:

12/2014

Belge Dili:

İngilizce

Document ID (Org No.):

2000630468

Sıklık:

Üç Yıllık

eISSN:

2148-4155

pISSN:

2148-4147

DOI:

https://doi.org/10.17482/uujfe.38441

Özet:

 

Hadfield steel (X120Mn12) is widely used in the engineering applications due to its excellent wear resistance. In this study, the effects of the cutting parameters on the surface roughness were investigated in relation to the lathe process carried out on Hadfield steel. The experiments were conducted at a cutting speed of 80, 110, 140 m/min, feed rate of 0.2, 0.3, 0.4 mm/rev and depth of cut 0.2, 0.4, 0.6 mm, using coated carbide tools. Regarding the evaluation of the machinability of Hadfield steel, a model was formed utilizing the response surface method (RSM). For the determination of the effects of the cutting parameters on the surface roughness, the central composite design (CCD) and variance analysis (ANOVA) were used. By means of the model formed as a result of the experimental study, it was demonstrated that among the cutting parameters, the feed rate is the most effective parameter on the surface roughness, with a contribution ratio of 90.28%. It was determined that the surface roughness increases with increasing feed rate. With respect to the effect on the surface roughness, the feed rate was followed by the cutting speed with a contribution ratio of 3.1% and the cutting depth with a contribution ratio of 1.7%.

Makale detayları

Evaluation of The Effects of Cutting Parameters On The Surface Roughness During The Turning of Hadfield Steel With Response Surface Methodology

Yazarlar: Ergün EKİCİ | Gültekin UZUN | Turgay KIVAK

Yayıncı: Bursa Uludağ University

Dergi: Uludağ University Journal of The Faculty of Engineering 2014 Vol.19 Issue 2, pp.19-28

Belge Tipi: Makale

Yayın Tarihi: 12/2014

Belge Dili: İngilizce

Document ID (Org No.): 2000630468

Sıklık: Üç Yıllık

eISSN: 2148-4155

pISSN: 2148-4147

DOI: https://doi.org/10.17482/uujfe.38441

Sayı

Yazarlar:

Ergün EKİCİ | Gültekin UZUN | Turgay KIVAK

Yayıncı:

Bursa Uludağ University

Dergi:

Uludağ University Journal of The Faculty of Engineering 2014 Vol.19 Issue 2, pp.19-28

Belge Tipi:

Makale

Yayın Tarihi:

12/2014

Belge Dili:

İngilizce

Document ID (Org No.):

2000630468

Sıklık:

Üç Yıllık

eISSN:

2148-4155

pISSN:

2148-4147

DOI:

https://doi.org/10.17482/uujfe.38441