An Experimental Study To Determine Sliding Shear Strength And Internal Frictional Coefficient Of Clay Brick Wall In A Masonry Building

Orhan Gazi ODACIOĞLU; Orhan DOĞAN

doi:https://doi.org/10.29137/umagd.545396

Makale detayları

An Experimental Study To Determine Sliding Shear Strength And Internal Frictional Coefficient Of Clay Brick Wall In A Masonry Building

Yazarlar:

Orhan Gazi ODACIOĞLU | Orhan DOĞAN

Yayıncı:

Kirikkale University

Ana Başlıklar:

Mühendislik ve uygulamalı operasyonlar

Dergi:

International Journal of Engineering Research and Development 2019 Vol.11 Issue 2, pp.670-676

Belge Tipi:

Makale

Yayın Tarihi:

6/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000647209

Sıklık:

İki Yıllık

eISSN:

1308-5514

DOI:

https://doi.org/10.29137/umagd.545396

Özet:

 


96% of the available buildings in use in Turkey are taking place in the
earthquake zone and approximately 50% of them an masonry structures built using
bricks. Sliding shear strength and internal friction coefficient were taken as
a constant value in Turkish Earthquake Code (TSC 2007) depending on the type
and hole rate of the brick section regardless of available compressive strength
of the brick, mortar and plaster of a wall. But nowadays these values are
recommended to be taken according to the compressive strength of mortar in TSC-2018.
In addition, with this study it is recommended that, to evaluate the
performance of a building against earthquake, the mechanical properties of the
materials used for a building must be determined on site with series of tests. It
is well-known that for each building mechanical properties of mortar and plaster
are variable because of site work conditions. 



 

.

Makale detayları

An Experimental Study To Determine Sliding Shear Strength And Internal Frictional Coefficient Of Clay Brick Wall In A Masonry Building

Yazarlar: Orhan Gazi ODACIOĞLU | Orhan DOĞAN

Yayıncı: Kirikkale University

Ana Başlıklar: Mühendislik ve uygulamalı operasyonlar

Dergi: International Journal of Engineering Research and Development 2019 Vol.11 Issue 2, pp.670-676

Belge Tipi: Makale

Yayın Tarihi: 6/2019

Belge Dili: İngilizce

Document ID (Org No.): 2000647209

Sıklık: İki Yıllık

eISSN: 1308-5514

DOI: https://doi.org/10.29137/umagd.545396

Sayı

Yazarlar:

Orhan Gazi ODACIOĞLU | Orhan DOĞAN

Yayıncı:

Kirikkale University

Ana Başlıklar:

Mühendislik ve uygulamalı operasyonlar

Dergi:

International Journal of Engineering Research and Development 2019 Vol.11 Issue 2, pp.670-676

Belge Tipi:

Makale

Yayın Tarihi:

6/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000647209

Sıklık:

İki Yıllık

eISSN:

1308-5514

DOI:

https://doi.org/10.29137/umagd.545396