Determination of Energy Consumption During The Tensile Test Sample Production in 3D Printer Working with The Fused Deposition Modeling Method

Muhammed Safa Kamer; Şemsettin Temiz; Ahmet Kaya

Makale detayları

Determination of Energy Consumption During The Tensile Test Sample Production in 3D Printer Working with The Fused Deposition Modeling Method

Yazarlar:

Muhammed Safa Kamer | Şemsettin Temiz | Ahmet Kaya

Yayıncı:

Igdir University

Ana Başlıklar:

Makine Mühendisliği

Dergi:

Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi Vol.13 Issue 3, pp.1998-2007

Belge Tipi:

Makale

Yayın Tarihi:

1/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001293789

pISSN:

2536-4618

Anahtar kelimeler:

Özet:

 Today, 3-dimensional 3D printers are developing increasingly, and rapid progress is being made to become an alternative to traditional production methods. 3D printers, which produce with the Fused Deposition Modeling FDM method, commonly produce by using polymer materials in the form of filament with a diameter of 1.75 mm or 2.85 mm. This study, tensile test specimens were produced using PLA filaments of different diameters 1.75 mm and 2.85 mm with two different 3D printers. The electricity consumption of 3D printers during the production of tensile test samples was measured. The energy consumed by both 3D printers in producing tensile test specimens was compared. Instead of simultaneously producing a single test sample, it has been determined that the power consumption per test sample will be reduced by producing many test samples together.

 Today, 3-dimensional 3D printers are developing increasingly, and rapid progress is being made to become an alternative to traditional production methods. 3D printers, which produce with the Fused Deposition Modeling FDM method, commonly produce by using polymer materials in the form of filament with a diameter of 1.75 mm or 2.85 mm. This study, tensile test specimens were produced using PLA filaments of different diameters 1.75 mm and 2.85 mm with two different 3D printers. The electricity consumption of 3D printers during the production of tensile test samples was measured. The energy consumed by both 3D printers in producing tensile test specimens was compared. Instead of simultaneously producing a single test sample, it has been determined that the power consumption per test sample will be reduced by producing many test samples together.

 Today, 3-dimensional 3D printers are developing increasingly, and rapid progress is being made to become an alternative to traditional production methods. 3D printers, which produce with the Fused Deposition Modeling FDM method, commonly produce by using polymer materials in the form of filament with a diameter of 1.75 mm or 2.85 mm. This study, tensile test specimens were produced using PLA filaments of different diameters 1.75 mm and 2.85 mm with two different 3D printers. The electricity consumption of 3D printers during the production of tensile test samples was measured. The energy consumed by both 3D printers in producing tensile test specimens was compared. Instead of simultaneously producing a single test sample, it has been determined that the power consumption per test sample will be reduced by producing many test samples together.

 Today, 3-dimensional 3D printers are developing increasingly, and rapid progress is being made to become an alternative to traditional production methods. 3D printers, which produce with the Fused Deposition Modeling FDM method, commonly produce by using polymer materials in the form of filament with a diameter of 1.75 mm or 2.85 mm. This study, tensile test specimens were produced using PLA filaments of different diameters 1.75 mm and 2.85 mm with two different 3D printers. The electricity consumption of 3D printers during the production of tensile test samples was measured. The energy consumed by both 3D printers in producing tensile test specimens was compared. Instead of simultaneously producing a single test sample, it has been determined that the power consumption per test sample will be reduced by producing many test samples together.

Makale detayları

Determination of Energy Consumption During The Tensile Test Sample Production in 3D Printer Working with The Fused Deposition Modeling Method

Yazarlar:

Muhammed Safa Kamer | Şemsettin Temiz | Ahmet Kaya

Yayıncı:

Igdir University

Ana Başlıklar:

Makine Mühendisliği

Dergi:

Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi Vol.13 Issue 3, pp.1998-2007

Belge Tipi:

Makale

Yayın Tarihi:

1/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001293789

pISSN:

2536-4618

3D Printer

Additive manufacturing

Energy consumption

Fused deposition modeling (FDM)

Sayı

Makale detayları

Determination of Energy Consumption During The Tensile Test Sample Production in 3D Printer Working with The Fused Deposition Modeling Method

Yazarlar: Muhammed Safa Kamer | Şemsettin Temiz | Ahmet Kaya

Yayıncı: Igdir University

Ana Başlıklar: Makine Mühendisliği

Dergi: Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi Vol.13 Issue 3, pp.1998-2007

Belge Tipi: Makale

Yayın Tarihi: 1/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001293789

pISSN: 2536-4618

3D Printer

Additive manufacturing

Energy consumption

Fused deposition modeling (FDM)

Sayı

Yazarlar:

Muhammed Safa Kamer | Şemsettin Temiz | Ahmet Kaya

Yayıncı:

Igdir University

Ana Başlıklar:

Makine Mühendisliği

Dergi:

Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi Vol.13 Issue 3, pp.1998-2007

Belge Tipi:

Makale

Yayın Tarihi:

1/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001293789

pISSN:

2536-4618