Effect of Different Whitening Toothpaste on Surface Roughness and Discoloration of Universal Composite Resins

Betül Kübra Kurucu Karadeniz; Seyit Bilal Özdemir; Büşra Özdemir; Fatma Kaplan

Makale detayları

Effect of Different Whitening Toothpaste on Surface Roughness and Discoloration of Universal Composite Resins

Yazarlar:

Betül Kübra Kurucu Karadeniz | Seyit Bilal Özdemir | Büşra Özdemir | Fatma Kaplan

Yayıncı:

Ondokuz Mayıs University

Ana Başlıklar:

Restoratif Diş Tedavisi

Dergi:

Türk Diş Hekimliği Araştırma Dergisi Vol.3 Issue 3, pp.398-408

Belge Tipi:

Makale

Yayın Tarihi:

12/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001335937

pISSN:

2822-4310

Anahtar kelimeler:

Özet:

 Aim: The aim of our study is to evaluate the surface roughness and color stability of two different universal resin composites colored with coffee after brushing with different toothpastes. Materials and Methods: A total of 120 samples n10 were prepared from 2 different resin composites Zenchroma, and Neo Spectra ST. Color valuesCIELAB were measured with a spectrophotometer at baseline, after 6 days of simulated coffee immersion and after tooth brushing. After initial roughness Ra0 measurements were performed with a profilometer, the samples were subjected to toothbrushing simulation, and final values Ra1 were recorded. The effects of different materials and toothpastes on color and roughness variables were analyzed by the Two-Way ANOVA method. The significance level of the statistics was p0.01. Results: The average ΔE001 values of materials after soaking in coffee were compared, revealing that Zenchroma material exhibited more discoloration. The highest increase in surface roughness in both Zenchroma and Neo Spectra ST materials was in the Opalesencence Whitening toothpaste OW toothpaste group, while the least increase was in the distilled water group. Conclusion: In coffee staining, the least color change was observed in multishahe nano-hybrid composite resin, while the greatest color change was observed in single shade microhybrid composite resin. The most significant color change, based on the tested composite resin samples, occurred after using silica-containing OW toothpaste, while the smallest color change was observed after using a non-whitening toothpaste Colgate Total 12CT. Surface roughness increased in all five different toothpaste groups used in the study, with the highest increase observed in the OW toothpaste group.

 Aim: The aim of our study is to evaluate the surface roughness and color stability of two different universal resin composites colored with coffee after brushing with different toothpastes. Materials and Methods: A total of 120 samples n10 were prepared from 2 different resin composites Zenchroma, and Neo Spectra ST. Color valuesCIELAB were measured with a spectrophotometer at baseline, after 6 days of simulated coffee immersion and after tooth brushing. After initial roughness Ra0 measurements were performed with a profilometer, the samples were subjected to toothbrushing simulation, and final values Ra1 were recorded. The effects of different materials and toothpastes on color and roughness variables were analyzed by the Two-Way ANOVA method. The significance level of the statistics was p0.01. Results: The average ΔE001 values of materials after soaking in coffee were compared, revealing that Zenchroma material exhibited more discoloration. The highest increase in surface roughness in both Zenchroma and Neo Spectra ST materials was in the Opalesencence Whitening toothpaste OW toothpaste group, while the least increase was in the distilled water group. Conclusion: In coffee staining, the least color change was observed in multishahe nano-hybrid composite resin, while the greatest color change was observed in single shade microhybrid composite resin. The most significant color change, based on the tested composite resin samples, occurred after using silica-containing OW toothpaste, while the smallest color change was observed after using a non-whitening toothpaste Colgate Total 12CT. Surface roughness increased in all five different toothpaste groups used in the study, with the highest increase observed in the OW toothpaste group.

 Aim: The aim of our study is to evaluate the surface roughness and color stability of two different universal resin composites colored with coffee after brushing with different toothpastes. Materials and Methods: A total of 120 samples n10 were prepared from 2 different resin composites Zenchroma, and Neo Spectra ST. Color valuesCIELAB were measured with a spectrophotometer at baseline, after 6 days of simulated coffee immersion and after tooth brushing. After initial roughness Ra0 measurements were performed with a profilometer, the samples were subjected to toothbrushing simulation, and final values Ra1 were recorded. The effects of different materials and toothpastes on color and roughness variables were analyzed by the Two-Way ANOVA method. The significance level of the statistics was p0.01. Results: The average ΔE001 values of materials after soaking in coffee were compared, revealing that Zenchroma material exhibited more discoloration. The highest increase in surface roughness in both Zenchroma and Neo Spectra ST materials was in the Opalesencence Whitening toothpaste OW toothpaste group, while the least increase was in the distilled water group. Conclusion: In coffee staining, the least color change was observed in multishahe nano-hybrid composite resin, while the greatest color change was observed in single shade microhybrid composite resin. The most significant color change, based on the tested composite resin samples, occurred after using silica-containing OW toothpaste, while the smallest color change was observed after using a non-whitening toothpaste Colgate Total 12CT. Surface roughness increased in all five different toothpaste groups used in the study, with the highest increase observed in the OW toothpaste group.

 Amaç: Çalışmamızın amacı, farklı diş macunları ile fırçalandıktan sonra kahve ile renklendirilmiş iki farklı universal rezin kompozitin yüzey pürüzlülüğü ve renk stabilitesini değerlendirmektir. Gereç ve Yöntem: İki farklı rezin kompozitten Zenchroma ve Neo Spectra ST toplam 120 örnek n10 hazırlanmıştır. Renk değerleri CIELAB başlangıçta, 6 günlük simüle edilmiş kahve daldırmasından sonra ve diş fırçalamadan sonra spektrofotometre ile ölçülmüştür. Başlangıç pürüzlülük Ra0 ölçümleri bir profilometre ile yapıldıktan sonra, örnekler diş fırçalama simülasyonuna tabi tutulmuş ve son değerler Ra1 kaydedilmiştir. Farklı kompozitlerin ve diş macunlarının renk ve pürüzlülük değişkenleri üzerindeki etkileri İki Yönlü ANOVA yöntemi ile analiz edilmiştir. İstatistiklerin anlamlılık düzeyi p0.01 olarak kabul edilmiştir. Bulgular: Örneklerin kahveye batırıldıktan sonra ortalama ΔE001 değerleri karşılaştırıldığında, Zenchroma daha fazla renk değişimi gösterdiği ortaya çıkmıştır. Hem Zenchroma hem de Neo Spectra ST yüzey pürüzlülüğündeki en yüksek artış Opalescence Whitening diş macunuOW diş macunu grubunda, en az artış ise distile su grubunda gözlenmiştir. Sonuç: Kahve lekelenmesinde, en az renk değişikliği çok renkli nano-hibrit kompozit reçinede, en fazla renk değişikliği ise tek renkli mikro-hibrit kompozit reçinede gözlenmiştir. Test edilen kompozit reçine örneklerine göre, en önemli renk değişikliği, silika içeren OW diş macunu kullanıldıktan sonra meydana gelirken, en az renk değişikliği beyazlatıcı olmayan bir diş macunu Colgate Total 12CT kullanıldıktan sonra gözlenmiştir. Yüzey pürüzlülüğü çalışmada kullanılan beş farklı diş macunu grubunda artmış olup, en yüksek artış OW diş macunu grubunda gözlenmiştir.

Makale detayları

Effect of Different Whitening Toothpaste on Surface Roughness and Discoloration of Universal Composite Resins

Yazarlar:

Betül Kübra Kurucu Karadeniz | Seyit Bilal Özdemir | Büşra Özdemir | Fatma Kaplan

Yayıncı:

Ondokuz Mayıs University

Ana Başlıklar:

Restoratif Diş Tedavisi

Dergi:

Türk Diş Hekimliği Araştırma Dergisi Vol.3 Issue 3, pp.398-408

Belge Tipi:

Makale

Yayın Tarihi:

12/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001335937

pISSN:

2822-4310

surface roughness

color stability

resin composite

Whitening Toothpasteyüzey pürüzlülüğü

renk stabilitesi

Rezin Kompozit Beyazlatıcı

Diş Macunu

Sayı

Makale detayları

Yazarlar: Betül Kübra Kurucu Karadeniz | Seyit Bilal Özdemir | Büşra Özdemir | Fatma Kaplan

Yayıncı: Ondokuz Mayıs University

Ana Başlıklar: Restoratif Diş Tedavisi

Dergi: Türk Diş Hekimliği Araştırma Dergisi Vol.3 Issue 3, pp.398-408

Belge Tipi: Makale

Yayın Tarihi: 12/2024

Belge Dili: İngilizce

Document ID (Org No.): 2001335937

pISSN: 2822-4310

Sayı

Yazarlar:

Betül Kübra Kurucu Karadeniz | Seyit Bilal Özdemir | Büşra Özdemir | Fatma Kaplan

Yayıncı:

Ondokuz Mayıs University

Ana Başlıklar:

Restoratif Diş Tedavisi

Dergi:

Türk Diş Hekimliği Araştırma Dergisi Vol.3 Issue 3, pp.398-408

Belge Tipi:

Makale

Yayın Tarihi:

12/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001335937

pISSN:

2822-4310