Comparison of Apically Extruded Debris During Root Canal Instrumentation Using T-endo must, T-endo mis, and Reciproc Blue Files

Funda Fundaoğlu Küçükekenci

Makale detayları

Comparison of Apically Extruded Debris During Root Canal Instrumentation Using T-endo must, T-endo mis, and Reciproc Blue Files

Yazarlar:

Funda Fundaoğlu Küçükekenci

Yayıncı:

Gazi University

Ana Başlıklar:

Diş Hekimliği | Endodonti

Dergi:

Acta Odontologica Turcica Vol.40 Issue 3, pp.79-83

Belge Tipi:

Makale

Yayın Tarihi:

4/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001298012

pISSN:

2147-690X

Anahtar kelimeler:

Özet:

 OBJECTIVE: The aim of this study was to compare the effect of nickel-titanium file systems with different taper angles working with rotation and reciprocation motion on the amount of debris extruding apically. MATERIALS AND METHOD: The study was performed using the Myers and Montgomery model. Forty-five human maxillary anterior teeth were inserted into preweighed Eppendorf tubes and randomly classified into three groups. After manual glide-path preparation, the teeth in each group were instrumented to the working length set 1 mm short of the anatomical apex using the standard sequence provided by the manufacturers: Group 1: Reciproc Blue Easy In Smile, New Jersey, USA, Group 2: T-endo must Dentac, İstanbul, Turkey,Group 3: T-endo mis Dentac, İstanbul, Turkey. Root canals were irrigated with 10 mL 2.5 NaOCl, 17 EDTA, and distilled water between each file insertion. The tubes with collected debris were stored in an incubator at 70C for 7 days. Measurement of the weight of extruded debris was performed by subtracting the pre-instrumentation from the post-instrumentation weight of the tubes. Data were analyzed using one-way ANOVA and Tukeys Honest Significant Difference Test α0.05. RESULTS: The weights of the apically extruded debris were 0.00940.0015 g in Group 1, 0.00750.0012 g in Group 2, and 0.00440.0010 g in Group 3, and the difference between all groups was statistically significant p0.05. CONCLUSION: The amount of apically extruded debris is related to the taper angle of the file used and the kinematics of the file.

 OBJECTIVE: The aim of this study was to compare the effect of nickel-titanium file systems with different taper angles working with rotation and reciprocation motion on the amount of debris extruding apically. MATERIALS AND METHOD: The study was performed using the Myers and Montgomery model. Forty-five human maxillary anterior teeth were inserted into preweighed Eppendorf tubes and randomly classified into three groups. After manual glide-path preparation, the teeth in each group were instrumented to the working length set 1 mm short of the anatomical apex using the standard sequence provided by the manufacturers: Group 1: Reciproc Blue Easy In Smile, New Jersey, USA, Group 2: T-endo must Dentac, İstanbul, Turkey,Group 3: T-endo mis Dentac, İstanbul, Turkey. Root canals were irrigated with 10 mL 2.5 NaOCl, 17 EDTA, and distilled water between each file insertion. The tubes with collected debris were stored in an incubator at 70C for 7 days. Measurement of the weight of extruded debris was performed by subtracting the pre-instrumentation from the post-instrumentation weight of the tubes. Data were analyzed using one-way ANOVA and Tukeys Honest Significant Difference Test α0.05. RESULTS: The weights of the apically extruded debris were 0.00940.0015 g in Group 1, 0.00750.0012 g in Group 2, and 0.00440.0010 g in Group 3, and the difference between all groups was statistically significant p0.05. CONCLUSION: The amount of apically extruded debris is related to the taper angle of the file used and the kinematics of the file.

 OBJECTIVE: The aim of this study was to compare the effect of nickel-titanium file systems with different taper angles working with rotation and reciprocation motion on the amount of debris extruding apically. MATERIALS AND METHOD: The study was performed using the Myers and Montgomery model. Forty-five human maxillary anterior teeth were inserted into preweighed Eppendorf tubes and randomly classified into three groups. After manual glide-path preparation, the teeth in each group were instrumented to the working length set 1 mm short of the anatomical apex using the standard sequence provided by the manufacturers: Group 1: Reciproc Blue Easy In Smile, New Jersey, USA, Group 2: T-endo must Dentac, İstanbul, Turkey,Group 3: T-endo mis Dentac, İstanbul, Turkey. Root canals were irrigated with 10 mL 2.5 NaOCl, 17 EDTA, and distilled water between each file insertion. The tubes with collected debris were stored in an incubator at 70C for 7 days. Measurement of the weight of extruded debris was performed by subtracting the pre-instrumentation from the post-instrumentation weight of the tubes. Data were analyzed using one-way ANOVA and Tukeys Honest Significant Difference Test α0.05. RESULTS: The weights of the apically extruded debris were 0.00940.0015 g in Group 1, 0.00750.0012 g in Group 2, and 0.00440.0010 g in Group 3, and the difference between all groups was statistically significant p0.05. CONCLUSION: The amount of apically extruded debris is related to the taper angle of the file used and the kinematics of the file.

 Amaç: Bu çalışmanın amacı, rotasyon ve resiprokasyon hareketi ile çalışan farklı koniklik açılarına sahip nikel titanium eğe sistemlerinin apikalden taşan debris miktarına etkisini karşılaştırmaktır. Gereç ve Yöntem: Çalışma Myers ve Montgomery modeli kullanılarak yapıldı. Kırk beş insan üst kesici diş önceden tartılmış Eppendorf tüplerine yerleştirildi ve anatomik apeksten 1 mm kısa çalışma boyu olacak şekilde Grup 1: Reciproc Blue Easy In Smile, New Jersey, ABD; Grup 2: T-endo must Dentac, İstanbul, Türkiye, Grup 3: T-endo mis Dentac, İstanbul, Türkiye ile şekillendirildi. Kök kanalları 10 mL 2.5 NaOCl, 17 EDTA ve distile su ile irrige edildi. İçerisinde debris olan tüpler 7 gün boyunca 70 C inkübatörde bekletildi. Tüplerin son ağırlığından ilk ağırlıkları çıkarılarak apikalden taşan debris miktarları elde edildi. Veriler, tek yönlü ANOVA ve Tukey çoklu karşılaştırma testi ile değerlendirildi α0,05. Bulgular: Grup 1de 0.00940.0015 g, Grup 2de 0.0070.0012 g ve Grup 3te 0.00440.0010 g debris görüldü. Tüm gruplar arasındaki fark istatistiksel olarak anlamlı bulundu p0.05. Sonuç: Apikalden taşan debris miktarı, kullanılan eğenin koniklik açısı ve eğenin kinematiği ile ilgilidir.

Makale detayları

Comparison of Apically Extruded Debris During Root Canal Instrumentation Using T-endo must, T-endo mis, and Reciproc Blue Files

Yazarlar:

Funda Fundaoğlu Küçükekenci

Yayıncı:

Gazi University

Ana Başlıklar:

Diş Hekimliği | Endodonti

Dergi:

Acta Odontologica Turcica Vol.40 Issue 3, pp.79-83

Belge Tipi:

Makale

Yayın Tarihi:

4/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001298012

pISSN:

2147-690X

apical foramen

endodontics

root canal preparation

root canal therapyapikal foramen

endodonti

kök kanalını hazırlama

kök kanal tedavisi

Sayı

Makale detayları

Yazarlar: Funda Fundaoğlu Küçükekenci

Yayıncı: Gazi University

Ana Başlıklar: Diş Hekimliği | Endodonti

Dergi: Acta Odontologica Turcica Vol.40 Issue 3, pp.79-83

Belge Tipi: Makale

Yayın Tarihi: 4/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001298012

pISSN: 2147-690X

Sayı

Yazarlar:

Funda Fundaoğlu Küçükekenci

Yayıncı:

Gazi University

Ana Başlıklar:

Diş Hekimliği | Endodonti

Dergi:

Acta Odontologica Turcica Vol.40 Issue 3, pp.79-83

Belge Tipi:

Makale

Yayın Tarihi:

4/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001298012

pISSN:

2147-690X