The Effect of Using Volcanic Tuff Aggregate with Different Grain Sizes in Facade Cladding Material on Physical and Mechanical Properties

Mustafa Dereli

Makale detayları

The Effect of Using Volcanic Tuff Aggregate with Different Grain Sizes in Facade Cladding Material on Physical and Mechanical Properties

Yazarlar:

Mustafa Dereli

Yayıncı:

Gazi University

Ana Başlıklar:

Yapı Malzemeleri | Malzeme Karekterizasyonu

Dergi:

Politeknik Dergisi Vol.28 Issue 3, pp.753-764

Belge Tipi:

Makale

Yayın Tarihi:

6/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001350492

pISSN:

2147-9429

Anahtar kelimeler:

Özet:

 Pyroclastic rocks of volcanic origin formed at different stages of volcanism find widespread use in the production of building materials. The present study addressed a field that was operated for the use of volcanic tuff, one of the pyroclastic rocks, as a material but abandoned since it could not provide the expected performance. For this idle field to be a valuable raw material source in the production of building materials, changes in the physical and mechanical properties of the material produced in different particle sizes were investigated to determine the aggregate properties. Since the aggregate type was considered suitable for the building cladding material, the research topic was determined accordingly. In the study, in which white cement was used as a binder, four different sample types were obtained by classifying aggregates according to various particle sizes. In the study, in which white cement was used as a binder, four different sample types were obtained by classifying aggregates according to various particle sizes. The present study showed that differences in aggregate particle sizes affected the physical and mechanical properties of the material and a light and durable building cladding material could be produced accordingly.

 Pyroclastic rocks of volcanic origin formed at different stages of volcanism find widespread use in the production of building materials. The present study addressed a field that was operated for the use of volcanic tuff, one of the pyroclastic rocks, as a material but abandoned since it could not provide the expected performance. For this idle field to be a valuable raw material source in the production of building materials, changes in the physical and mechanical properties of the material produced in different particle sizes were investigated to determine the aggregate properties. Since the aggregate type was considered suitable for the building cladding material, the research topic was determined accordingly. In the study, in which white cement was used as a binder, four different sample types were obtained by classifying aggregates according to various particle sizes. In the study, in which white cement was used as a binder, four different sample types were obtained by classifying aggregates according to various particle sizes. The present study showed that differences in aggregate particle sizes affected the physical and mechanical properties of the material and a light and durable building cladding material could be produced accordingly.

 Pyroclastic rocks of volcanic origin formed at different stages of volcanism find widespread use in the production of building materials. The present study addressed a field that was operated for the use of volcanic tuff, one of the pyroclastic rocks, as a material but abandoned since it could not provide the expected performance. For this idle field to be a valuable raw material source in the production of building materials, changes in the physical and mechanical properties of the material produced in different particle sizes were investigated to determine the aggregate properties. Since the aggregate type was considered suitable for the building cladding material, the research topic was determined accordingly. In the study, in which white cement was used as a binder, four different sample types were obtained by classifying aggregates according to various particle sizes. In the study, in which white cement was used as a binder, four different sample types were obtained by classifying aggregates according to various particle sizes. The present study showed that differences in aggregate particle sizes affected the physical and mechanical properties of the material and a light and durable building cladding material could be produced accordingly.

 Volkanizmanın farklı aşamalarında meydana gelen volkanik kökenli piroklastik kayaçlar yapı malzemesi üretiminde yaygın kullanım imkanı bulurlar. Çalışmada piroklastik kayaçlardan olan volkanik tüflerin malzeme olarak kullanılması amacıyla işletilmiş ancak beklenen performansı sağlayamadığı için terkedilmiş bir saha ele alınmaktadır. Atıl haldeki bu sahanın yapı malzemesi üretiminde değerli bir hammadde kaynağı olabilmesi adına agrega özelliklerin belirlenmesi bu doğrultuda farklı tane boyutlarında üretilen malzemenin fiziksel ve mekanik özelliklerinde değişim araştırılmıştır. Agrega türü yapı cephe kaplama malzemesine uygun görüldüğünden araştırma konusu bu yönde oluşturulmuştur. Beyaz çimentonun bağlayıcı olarak kullanıldığı çalışmada agregalar çeşitli tane boyutlarına göre sınıflandırılarak dört farklı numune tipi elde edilmiştir. Araştırmada volkanik tüf agreganın özelliklerinin belirlenmesinde çimento bağlayıcılı cephe kaplama malzemesi olarak yaygın kullanımı olan dış sıva uygulamaları metot olarak kabul edilmiştir. Bu doğrultuda dış sıva standartlarında belirtilen numune hazırlama ve test metotları çalışma kapsamını oluşturmaktadır. Beyaz çimentonun bağlayıcı olarak kullanıldığı çalışmada agregalar çeşitli tane boyutlarına göre sınıflandırılarak dört farklı numune tipi elde edilmiştir. Ayrıca yaygın dış sıva üretiminde kullanılan kırma taş agregalı referans numune hazırlanarak volkanik tüf agregalı diğer türlerle sonuçları karşılaştırılmıştır. Yapılan çalışma ile agrega tane boyutlarındaki farklılıkların malzemenin fiziksel ve mekanik özelliklerini etkilediği, bu doğrultuda hafif, dayanıklı bir cephe kaplama malzemesi üretilebileceği görülmüştür.

Makale detayları

The Effect of Using Volcanic Tuff Aggregate with Different Grain Sizes in Facade Cladding Material on Physical and Mechanical Properties

Yazarlar:

Mustafa Dereli

Yayıncı:

Gazi University

Ana Başlıklar:

Yapı Malzemeleri | Malzeme Karekterizasyonu

Dergi:

Politeknik Dergisi Vol.28 Issue 3, pp.753-764

Belge Tipi:

Makale

Yayın Tarihi:

6/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001350492

pISSN:

2147-9429

Volcanic tuff

building cladding materials

exterior plaster

physical properties

mechanical properties.Volkanik tüf

yapı kaplama malzemeleri

dış cephe sıvası

fiziksel özellikler

mekanik özellikler

Sayı

Makale detayları

Yazarlar: Mustafa Dereli

Yayıncı: Gazi University

Ana Başlıklar: Yapı Malzemeleri | Malzeme Karekterizasyonu

Dergi: Politeknik Dergisi Vol.28 Issue 3, pp.753-764

Belge Tipi: Makale

Yayın Tarihi: 6/2025

Belge Dili: İngilizce

Document ID (Org No.): 2001350492

pISSN: 2147-9429

Sayı

Yazarlar:

Mustafa Dereli

Yayıncı:

Gazi University

Ana Başlıklar:

Yapı Malzemeleri | Malzeme Karekterizasyonu

Dergi:

Politeknik Dergisi Vol.28 Issue 3, pp.753-764

Belge Tipi:

Makale

Yayın Tarihi:

6/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001350492

pISSN:

2147-9429