CONDENSATION ANALYSIS OF THE INSULATION OF WALLS ACCORDING TO DIFFERENT LOCATIONS IN MARDIN PROVINCE

Fatih ÜNAL

doi:https://doi.org/10.36222/ejt.648601

Makale detayları

CONDENSATION ANALYSIS OF THE INSULATION OF WALLS ACCORDING TO DIFFERENT LOCATIONS IN MARDIN PROVINCE

Yazarlar:

Fatih ÜNAL

Yayıncı:

Hibetullah KILIÇ

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

European Journal of Technique (EJT) 2019 Vol.9 Issue 2, pp.253-262

Belge Tipi:

Makale

Yayın Tarihi:

12/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000425612

eISSN:

2536-5134

pISSN:

2536-5010

DOI:

https://doi.org/10.36222/ejt.648601

Özet:

 


In
this study, condensation and vapor diffusion caused by different positioned
insulation in the wall for Mardin province were analyzed. In the analysis,
according to 2008 standard of TS 825, Glaser graphing method and graphical user
interface (GUI) were used in MATLAB. Extruded polyurethane foam was used as the
insulation material and normal unreinforced concrete was selected as the wall.
Evaporation and condensation amounts were determined by creating 6 different
wall models with the same insulation thickness of 20 cm thick and unreinforced
concrete wall covered with 2 cm plaster on the inside and 3 cm thickness on the
outside. The data obtained for 2 cm and 4 cm insulation thicknesses are
presented in tables and the results are interpreted for Mardin province. As a
result, it was seen that the worst wall structure in terms of condensation and
evaporation was obtained in the middle insulated wall and later in the interior
insulated wall structure. The externally insulated wall showed no condensation.

.

Makale detayları

CONDENSATION ANALYSIS OF THE INSULATION OF WALLS ACCORDING TO DIFFERENT LOCATIONS IN MARDIN PROVINCE

Yazarlar: Fatih ÜNAL

Yayıncı: Hibetullah KILIÇ

Ana Başlıklar: Diğer mühendislik dalları

Dergi: European Journal of Technique (EJT) 2019 Vol.9 Issue 2, pp.253-262

Belge Tipi: Makale

Yayın Tarihi: 12/2019

Belge Dili: İngilizce

Document ID (Org No.): 2000425612

eISSN: 2536-5134

pISSN: 2536-5010

DOI: https://doi.org/10.36222/ejt.648601

Sayı

Yazarlar:

Fatih ÜNAL

Yayıncı:

Hibetullah KILIÇ

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

European Journal of Technique (EJT) 2019 Vol.9 Issue 2, pp.253-262

Belge Tipi:

Makale

Yayın Tarihi:

12/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000425612

eISSN:

2536-5134

pISSN:

2536-5010

DOI:

https://doi.org/10.36222/ejt.648601