FORMULATION OF NEOPRENE/CHLOROPRENE RUBBER, EXAMINATION OF THEIR PHYSICAL, MECHANICAL AND RHEOLOGICAL PROPERTIES

Nükte Topraksever; Osman Mehmet

Makale detayları

FORMULATION OF NEOPRENE/CHLOROPRENE RUBBER, EXAMINATION OF THEIR PHYSICAL, MECHANICAL AND RHEOLOGICAL PROPERTIES

Yazarlar:

Nükte Topraksever | Osman Mehmet

Yayıncı:

Istanbul Ticaret University

Ana Başlıklar:

Malzemelerin Fiziksel Özellikleri | Polimer Bilimi ve Teknolojileri | Polimerler ve Plastikler

Dergi:

İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi Vol.23 Issue 45, pp.42-51

Belge Tipi:

Makale

Yayın Tarihi:

6/2024

Belge Dili:

Türkçe

Document ID (Org No.):

2001318560

pISSN:

1305-7820

Anahtar kelimeler:

Özet:

 In this study, physical, mechanical and rheological properties of flame resistant neoprenechloroprene conveyor belt formulation were investigated. Firstly, vulcanization curve was obtained by rheometer and the vulcanized composites were prepared for physical and mechanical tests. Density, hardness, elongation at break, tensile strength and abrasive abrasion tests were performed on conveyor belt samples taken according to the specified standards. According to the test results, tensile strength; 219,9 Nmm2, load at break; 290,33 N, elongation at break; 520,37 , hardness; 59,740,90, abrasion; 78,562,49 mm3 and density; 1,1080,051 gcm3. The tests were found to be in compliance with the standards of the Turkish Standards Institute for rubber or plastic-coated conveyor belts with textile carcasses that can be used in underground mines.

 In this study, physical, mechanical and rheological properties of flame resistant neoprenechloroprene conveyor belt formulation were investigated. Firstly, vulcanization curve was obtained by rheometer and the vulcanized composites were prepared for physical and mechanical tests. Density, hardness, elongation at break, tensile strength and abrasive abrasion tests were performed on conveyor belt samples taken according to the specified standards. According to the test results, tensile strength; 219,9 Nmm2, load at break; 290,33 N, elongation at break; 520,37 , hardness; 59,740,90, abrasion; 78,562,49 mm3 and density; 1,1080,051 gcm3. The tests were found to be in compliance with the standards of the Turkish Standards Institute for rubber or plastic-coated conveyor belts with textile carcasses that can be used in underground mines.

 In this study, physical, mechanical and rheological properties of flame resistant neoprenechloroprene conveyor belt formulation were investigated. Firstly, vulcanization curve was obtained by rheometer and the vulcanized composites were prepared for physical and mechanical tests. Density, hardness, elongation at break, tensile strength and abrasive abrasion tests were performed on conveyor belt samples taken according to the specified standards. According to the test results, tensile strength; 219,9 Nmm2, load at break; 290,33 N, elongation at break; 520,37 , hardness; 59,740,90, abrasion; 78,562,49 mm3 and density; 1,1080,051 gcm3. The tests were found to be in compliance with the standards of the Turkish Standards Institute for rubber or plastic-coated conveyor belts with textile carcasses that can be used in underground mines.

 Bu çalışmada geliştirilen aleve dayanıklı neoprenkloropren konveyör bant formülasyonunun fiziksel, mekanik ve reolojik özellikleri incelenmiştir. Öncelikle reolojik özelliklerden vulkanizayon eğrisi reometre ile elde edilmiş, vulkanize olan kompozitler fiziksel ve mekanik testler için hazır hale getirilmiştir. Belirlenen standartlara göre alınan konveyör bant numunelerine yoğunluk, sertlik, kopma uzaması ve çekme mukavemeti ve aşındırma testleri yapılmıştır. Test sonuçlarına göre, çekme dayanımı; 219,9 Nmm2, kopma noktasındaki yük; 290,33 N, kopma noktasındaki uzama yüzdesi; 520,37, sertlik; 59,740,90, aşınma; 78,562,49 mm3 ve yoğunluk; 1,1080,051 gcm3tür. Yapılan testler Türk Standartları Enstitüsünün yer altı madenlerinde kullanılabilecek tekstil karkaslı kauçuk veya plastik kaplı konveyör bantlar için sunduğu standartlara uyumlu olarak bulunmuştur.

Makale detayları

FORMULATION OF NEOPRENE/CHLOROPRENE RUBBER, EXAMINATION OF THEIR PHYSICAL, MECHANICAL AND RHEOLOGICAL PROPERTIES

Yazarlar:

Nükte Topraksever | Osman Mehmet

Yayıncı:

Istanbul Ticaret University

Ana Başlıklar:

Malzemelerin Fiziksel Özellikleri | Polimer Bilimi ve Teknolojileri | Polimerler ve Plastikler

Dergi:

İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi Vol.23 Issue 45, pp.42-51

Belge Tipi:

Makale

Yayın Tarihi:

6/2024

Belge Dili:

Türkçe

Document ID (Org No.):

2001318560

pISSN:

1305-7820

Rubber

neoprene/chloroprene

flame resistant conveyor belt

formulation.Kauçuk

neopren/kloropren

aleve dayanıklı konveyör bant

formülasyon.

Sayı

Makale detayları

Yazarlar: Nükte Topraksever | Osman Mehmet

Yayıncı: Istanbul Ticaret University

Ana Başlıklar: Malzemelerin Fiziksel Özellikleri | Polimer Bilimi ve Teknolojileri | Polimerler ve Plastikler

Dergi: İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi Vol.23 Issue 45, pp.42-51

Belge Tipi: Makale

Yayın Tarihi: 6/2024

Belge Dili: Türkçe

Document ID (Org No.): 2001318560

pISSN: 1305-7820

Sayı

Yazarlar:

Nükte Topraksever | Osman Mehmet

Yayıncı:

Istanbul Ticaret University

Ana Başlıklar:

Malzemelerin Fiziksel Özellikleri | Polimer Bilimi ve Teknolojileri | Polimerler ve Plastikler

Dergi:

İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi Vol.23 Issue 45, pp.42-51

Belge Tipi:

Makale

Yayın Tarihi:

6/2024

Belge Dili:

Türkçe

Document ID (Org No.):

2001318560

pISSN:

1305-7820