Comparison of Mandibular Measurements Using 3D Scanner and Computed Tomography Methods in New Zealand Rabbits

Ali Koçyiğit; Betül Kanik; İsmail Demircioğlu; Funda Aksünger Karaavcı

Makale detayları

Comparison of Mandibular Measurements Using 3D Scanner and Computed Tomography Methods in New Zealand Rabbits

Yazarlar:

Ali Koçyiğit | Betül Kanik | İsmail Demircioğlu | Funda Aksünger Karaavcı

Yayıncı:

Van Yuzuncu Yıl University

Ana Başlıklar:

Veteriner Anatomi ve Fizyoloji

Dergi:

Van Veterinary Journal Vol.36 Issue 1, pp.30-34

Belge Tipi:

Makale

Yayın Tarihi:

3/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001344059

pISSN:

2149-3359

Anahtar kelimeler:

Özet:

 The aim of the study is to perform morphometric analyses on the mandibles of New Zealand rabbits using different measurement methods and to compare these methods. In this context, the mandibles of 6 female and 6 male New Zealand rabbits were used in the study. Computed tomography CT cross-sectional images of the animals were taken and a three-dimensional model of the mandible was obtained from the two-dimensional images using the MIMICS medical software. In addition, the mandibles were modeled in 3D using a 3D scanner. Length measurements were made on the obtained 3D model and statistical analyses of these data were provided. When the measurements taken with the CT and 3D scanner methods were compared, it was observed that the two measurement methods were compatible with each other. As a result, the measurements taken with the 3D scanner and CT were compared and similar results were obtained with both methods. It is thought that this result will be a resource for researchers working on experimental mandibular surgery in rabbits and that taking measurements with a 3D scanner has more advantages than the CT device in terms of morphometric measurement, higher detail and surface scanning. The CT device is advantageous because it scans the entire tissue and gives very fast results. As a result, using both methods together are thought to be advantageous for researchers.

 The aim of the study is to perform morphometric analyses on the mandibles of New Zealand rabbits using different measurement methods and to compare these methods. In this context, the mandibles of 6 female and 6 male New Zealand rabbits were used in the study. Computed tomography CT cross-sectional images of the animals were taken and a three-dimensional model of the mandible was obtained from the two-dimensional images using the MIMICS medical software. In addition, the mandibles were modeled in 3D using a 3D scanner. Length measurements were made on the obtained 3D model and statistical analyses of these data were provided. When the measurements taken with the CT and 3D scanner methods were compared, it was observed that the two measurement methods were compatible with each other. As a result, the measurements taken with the 3D scanner and CT were compared and similar results were obtained with both methods. It is thought that this result will be a resource for researchers working on experimental mandibular surgery in rabbits and that taking measurements with a 3D scanner has more advantages than the CT device in terms of morphometric measurement, higher detail and surface scanning. The CT device is advantageous because it scans the entire tissue and gives very fast results. As a result, using both methods together are thought to be advantageous for researchers.

 The aim of the study is to perform morphometric analyses on the mandibles of New Zealand rabbits using different measurement methods and to compare these methods. In this context, the mandibles of 6 female and 6 male New Zealand rabbits were used in the study. Computed tomography CT cross-sectional images of the animals were taken and a three-dimensional model of the mandible was obtained from the two-dimensional images using the MIMICS medical software. In addition, the mandibles were modeled in 3D using a 3D scanner. Length measurements were made on the obtained 3D model and statistical analyses of these data were provided. When the measurements taken with the CT and 3D scanner methods were compared, it was observed that the two measurement methods were compatible with each other. As a result, the measurements taken with the 3D scanner and CT were compared and similar results were obtained with both methods. It is thought that this result will be a resource for researchers working on experimental mandibular surgery in rabbits and that taking measurements with a 3D scanner has more advantages than the CT device in terms of morphometric measurement, higher detail and surface scanning. The CT device is advantageous because it scans the entire tissue and gives very fast results. As a result, using both methods together are thought to be advantageous for researchers.

 Çalışmanın amacı, Yeni Zelanda tavşanlarının mandibulaları üzerinde farklı ölçüm yöntemleriyle morfometrik analizler yapmak ve bu yöntemleri karşılaştırmaktır. Bu doğrultuda, çalışmada 6 dişi ve 6 erkek ergin Yeni Zelanda Tavşanı mandibulası kullanılmıştır. Hayvanların bilgisayarlı tomografi BT kesit görüntüleri alınmış ve iki boyutlu görüntülerden MIMICS Medical yazılımı kullanılarak mandibulanın üç boyutlu modeli elde edilmiştir. Ayrıca 3 boyutlu tarayıcı kullanılarak mandibulalar 3 boyutlu olarak modellenmesi gerçekleştirilmiştir. Elde edilen 3B model üzerinde uzunluk ölçümleri yapılmış ve bu verilerin istatistiksel analizleri sağlanmıştır. BT ve 3B tarayıcı yöntemleriyle alınan ölçümler karşılaştırıldığında, iki ölçüm yönteminin birbiriyle uyumlu olduğu gözlemlenmiştir. Sonuç olarak, 3 boyutlu tarayıcı ve BT ile yapılan ölçümler karşılaştırılmış ve her iki yöntemle de benzer sonuçlar elde edilmiştir. Bu sonucun tavşanlarda deneysel mandibular cerrahi üzerine çalışan araştırmacılar için bir kaynak olacağı ve 3B tarayıcı ile ölçüm almanın BT cihazına göre morfometrik ölçüm, daha yüksek detay ve yüzey tarama yönleri daha avantajlıdır. BT cihazı dokuların tamamını taradığı için ve çok hızlı sonuç verdiği için avantajlı olmaktadır. Sonuç olarak çalışmada kullanılan yöntemlerin birlikte ve koordineli olarak kullanılmasının araştırmacılar için avantajlı olacağı düşünülmektedir.

Makale detayları

Comparison of Mandibular Measurements Using 3D Scanner and Computed Tomography Methods in New Zealand Rabbits

Yazarlar:

Ali Koçyiğit | Betül Kanik | İsmail Demircioğlu | Funda Aksünger Karaavcı

Yayıncı:

Van Yuzuncu Yıl University

Ana Başlıklar:

Veteriner Anatomi ve Fizyoloji

Dergi:

Van Veterinary Journal Vol.36 Issue 1, pp.30-34

Belge Tipi:

Makale

Yayın Tarihi:

3/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001344059

pISSN:

2149-3359

Computed Tomography

Mandible

Rabbit

Three-Dimensional scanner.Bilgisayarlı Tomografi

Mandibula

Tavşan

Üç boyutlu tarayıcı

Sayı

Makale detayları

Yazarlar: Ali Koçyiğit | Betül Kanik | İsmail Demircioğlu | Funda Aksünger Karaavcı

Yayıncı: Van Yuzuncu Yıl University

Ana Başlıklar: Veteriner Anatomi ve Fizyoloji

Dergi: Van Veterinary Journal Vol.36 Issue 1, pp.30-34

Belge Tipi: Makale

Yayın Tarihi: 3/2025

Belge Dili: İngilizce

Document ID (Org No.): 2001344059

pISSN: 2149-3359

Sayı

Yazarlar:

Ali Koçyiğit | Betül Kanik | İsmail Demircioğlu | Funda Aksünger Karaavcı

Yayıncı:

Van Yuzuncu Yıl University

Ana Başlıklar:

Veteriner Anatomi ve Fizyoloji

Dergi:

Van Veterinary Journal Vol.36 Issue 1, pp.30-34

Belge Tipi:

Makale

Yayın Tarihi:

3/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001344059

pISSN:

2149-3359