EFFECTS OF FILLING RATIO, ORIENTATION AND PRINT TEMPERATURE ON BENDING PROPERTIES OF 3D PRINTED PLA BEAMS

Önder Yeşil; Kemal MAZANOĞLU

Makale detayları

EFFECTS OF FILLING RATIO, ORIENTATION AND PRINT TEMPERATURE ON BENDING PROPERTIES OF 3D PRINTED PLA BEAMS

Yazarlar:

Önder Yeşil | Kemal MAZANOĞLU

Yayıncı:

Usak University

Ana Başlıklar:

Mühendislik ve uygulamalı operasyonlar

Dergi:

Usak University Journal of Engineering Sciences 2018 Vol.1 Issue 2, pp.66-75

Belge Tipi:

Makale

Yayın Tarihi:

12/2018

Belge Dili:

İngilizce

Document ID (Org No.):

2000671059

Sıklık:

İki Yıllık

eISSN:

2651-3447

Özet:

 

In this study, flexural properties of 3D printed
PLA beam specimens produced with different filling ratios, orientations and
print temperatures are experimentally investigated. Various bending specimens
were produced by means of 3D printer using PLA filament as raw material. Low,
intermediate and high filling ratios, lengthwise/widthwise and crosswise
filling orientations, and different print temperatures were chosen as
alternative production parameters of the printer. Manufactured beam specimens
were subjected to three-point bending tests at room temperature in accordance
with the TS EN ISO 178 standard. Effects of production parameters on mechanical
bending properties including flexural modulus, maximum flexural stress,
flexural strain at break, maximum force, and maximum deflection are clearly
shown and discussed to state reasonable explanations of test results and to
make conclusive suggestions.

Makale detayları

EFFECTS OF FILLING RATIO, ORIENTATION AND PRINT TEMPERATURE ON BENDING PROPERTIES OF 3D PRINTED PLA BEAMS

Yazarlar: Önder Yeşil | Kemal MAZANOĞLU

Yayıncı: Usak University

Ana Başlıklar: Mühendislik ve uygulamalı operasyonlar

Dergi: Usak University Journal of Engineering Sciences 2018 Vol.1 Issue 2, pp.66-75

Belge Tipi: Makale

Yayın Tarihi: 12/2018

Belge Dili: İngilizce

Document ID (Org No.): 2000671059

Sıklık: İki Yıllık

eISSN: 2651-3447

Sayı

Yazarlar:

Önder Yeşil | Kemal MAZANOĞLU

Yayıncı:

Usak University

Ana Başlıklar:

Mühendislik ve uygulamalı operasyonlar

Dergi:

Usak University Journal of Engineering Sciences 2018 Vol.1 Issue 2, pp.66-75

Belge Tipi:

Makale

Yayın Tarihi:

12/2018

Belge Dili:

İngilizce

Document ID (Org No.):

2000671059

Sıklık:

İki Yıllık

eISSN:

2651-3447