Sustainable Optimization of Mold Heating: A Dual Approach with SWARA  and MARCOS Methods

Rahim Can Peker; Asım Sinan Karakurt

Makale detayları

Sustainable Optimization of Mold Heating: A Dual Approach with SWARA and MARCOS Methods

Yazarlar:

Rahim Can Peker | Asım Sinan Karakurt

Yayıncı:

Gazi University

Ana Başlıklar:

Optimization Techniques in Mechanical Engineering | Multiple Criteria Decision Making

Dergi:

Gazi University Journal of Science Vol.37 Issue 4, pp.1871-1884

Belge Tipi:

Makale

Yayın Tarihi:

1/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001331653

pISSN:

2147-1762

Anahtar kelimeler:

Özet:

 There are many methods and raw materials used in the manufacture of Fiber Reinforced Plastics FRP by hot molding, such as Sheet Molding Compound SMC, Bulk Molding Compound BMC, and Prepreg fabrics. In most applications, it is common practice to insert the new dough into the mold without cooling it, then re-press and cure. Placing the mold in the dough without cooling causes the surface of the molded product to cure faster than the inner region, resulting in a structurally discontinuous structure in the product. Therefore, in more professional production, the mold is lowered to around 120 oC and the dough is poured into the mold at this stage. However, this increases energy consumption and carbon emissions for the heating and cooling phases. This study investigated the energy efficiency of the production of FRP using the hot-pressing process. At the end of this study, by using alternative energy methods in the manufacturing processes, results such as investment costs, depreciation costs, reductions in bills, and carbon emissions were achieved. To find the best alternative from these results, the criteria weights were determined using SWARA, and the alternatives identified were ranked using the MARCOS method. As a result of this ranking, the best alternative was determined to be a 40 kWh battery and a 25 kW solar panel option among the solar panel power and battery capacity alternatives.

 There are many methods and raw materials used in the manufacture of Fiber Reinforced Plastics FRP by hot molding, such as Sheet Molding Compound SMC, Bulk Molding Compound BMC, and Prepreg fabrics. In most applications, it is common practice to insert the new dough into the mold without cooling it, then re-press and cure. Placing the mold in the dough without cooling causes the surface of the molded product to cure faster than the inner region, resulting in a structurally discontinuous structure in the product. Therefore, in more professional production, the mold is lowered to around 120 oC and the dough is poured into the mold at this stage. However, this increases energy consumption and carbon emissions for the heating and cooling phases. This study investigated the energy efficiency of the production of FRP using the hot-pressing process. At the end of this study, by using alternative energy methods in the manufacturing processes, results such as investment costs, depreciation costs, reductions in bills, and carbon emissions were achieved. To find the best alternative from these results, the criteria weights were determined using SWARA, and the alternatives identified were ranked using the MARCOS method. As a result of this ranking, the best alternative was determined to be a 40 kWh battery and a 25 kW solar panel option among the solar panel power and battery capacity alternatives.

 There are many methods and raw materials used in the manufacture of Fiber Reinforced Plastics FRP by hot molding, such as Sheet Molding Compound SMC, Bulk Molding Compound BMC, and Prepreg fabrics. In most applications, it is common practice to insert the new dough into the mold without cooling it, then re-press and cure. Placing the mold in the dough without cooling causes the surface of the molded product to cure faster than the inner region, resulting in a structurally discontinuous structure in the product. Therefore, in more professional production, the mold is lowered to around 120 oC and the dough is poured into the mold at this stage. However, this increases energy consumption and carbon emissions for the heating and cooling phases. This study investigated the energy efficiency of the production of FRP using the hot-pressing process. At the end of this study, by using alternative energy methods in the manufacturing processes, results such as investment costs, depreciation costs, reductions in bills, and carbon emissions were achieved. To find the best alternative from these results, the criteria weights were determined using SWARA, and the alternatives identified were ranked using the MARCOS method. As a result of this ranking, the best alternative was determined to be a 40 kWh battery and a 25 kW solar panel option among the solar panel power and battery capacity alternatives.

 There are many methods and raw materials used in the manufacture of Fiber Reinforced Plastics FRP by hot molding, such as Sheet Molding Compound SMC, Bulk Molding Compound BMC, and Prepreg fabrics. In most applications, it is common practice to insert the new dough into the mold without cooling it, then re-press and cure. Placing the mold in the dough without cooling causes the surface of the molded product to cure faster than the inner region, resulting in a structurally discontinuous structure in the product. Therefore, in more professional production, the mold is lowered to around 120 oC and the dough is poured into the mold at this stage. However, this increases energy consumption and carbon emissions for the heating and cooling phases. This study investigated the energy efficiency of the production of FRP using the hot-pressing process. At the end of this study, by using alternative energy methods in the manufacturing processes, results such as investment costs, depreciation costs, reductions in bills, and carbon emissions were achieved. To find the best alternative from these results, the criteria weights were determined using SWARA, and the alternatives identified were ranked using the MARCOS method. As a result of this ranking, the best alternative was determined to be a 40 kWh battery and a 25 kW solar panel option among the solar panel power and battery capacity alternatives.

Makale detayları

Sustainable Optimization of Mold Heating: A Dual Approach with SWARA and MARCOS Methods

Yazarlar:

Rahim Can Peker | Asım Sinan Karakurt

Yayıncı:

Gazi University

Ana Başlıklar:

Optimization Techniques in Mechanical Engineering | Multiple Criteria Decision Making

Dergi:

Gazi University Journal of Science Vol.37 Issue 4, pp.1871-1884

Belge Tipi:

Makale

Yayın Tarihi:

1/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001331653

pISSN:

2147-1762

Energy Efficiency

Hot press manufacturing

Multi-Criteria Decision Making

Optimization

Sayı

Makale detayları

Sustainable Optimization of Mold Heating: A Dual Approach with SWARA and MARCOS Methods

Yazarlar: Rahim Can Peker | Asım Sinan Karakurt

Yayıncı: Gazi University

Ana Başlıklar: Optimization Techniques in Mechanical Engineering | Multiple Criteria Decision Making

Dergi: Gazi University Journal of Science Vol.37 Issue 4, pp.1871-1884

Belge Tipi: Makale

Yayın Tarihi: 1/2024

Belge Dili: İngilizce

Document ID (Org No.): 2001331653

pISSN: 2147-1762

Energy Efficiency

Hot press manufacturing

Multi-Criteria Decision Making

Optimization

Sayı

Yazarlar:

Rahim Can Peker | Asım Sinan Karakurt

Yayıncı:

Gazi University

Ana Başlıklar:

Optimization Techniques in Mechanical Engineering | Multiple Criteria Decision Making

Dergi:

Gazi University Journal of Science Vol.37 Issue 4, pp.1871-1884

Belge Tipi:

Makale

Yayın Tarihi:

1/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001331653

pISSN:

2147-1762