COMBINATION OF COPPER INTERMEDIATE SX STEEL AND GR5 (Ti6Al4V) TITANIUM BY DIFFUSION WELDING METHOD

Jiyan Güney; Haluk Kejanlı

Makale detayları

COMBINATION OF COPPER INTERMEDIATE SX STEEL AND GR5 (Ti6Al4V) TITANIUM BY DIFFUSION WELDING METHOD

Yazarlar:

Jiyan Güney | Haluk Kejanlı

Yayıncı:

Dicle University

Dergi:

Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi Vol.14 Issue 2, pp.315-323

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001291724

pISSN:

1309-8640

Anahtar kelimeler:

Özet:

 GR5 Ti6Al4V is a material commonly used in aerospace and space, biomedical and automobile sectors, consisting of pure titanium at a minimum of 99 purity. Besides being lightweight, GR5 is separate from similar materials with its ability to resist corrosion at high levels and show high strength. SX steel is high silicon-content austenitic stainless steel with the ability of good quality of welding and excellent corrosion resistance in high concentration sulfuric acid and nitric acid. SX is used in areas such as acid coolers, acid piping systems, acid distributors, acid towers and tanks, pumps, nozzles, internals, strainers and mesh pads. With improving technology, the need for steel-titanium materials that are resisted to acid and made with welded joint is increasing. In this study, the effect of GR and SX materials of welding temperature on the connection is examined with diffusion welding method using copper intermediary layer. The material pairs are combined with a pressure of 5 MPa and a fixed welding time of 60 minutes in an argon gas environment in a silicon bar oven at the temperature of 980, 1000 and 1020C. The SEM-EDS-AFM analysis of the combined samples is performed, the metallographic structure of the intermediary layer in the diffusion-affected region is examined by the optical microscope, and the possible phases are tried to be determined by the XRD analysis. The micro stiffness values of the connection area are analyzed.

 GR5 Ti6Al4V is a material commonly used in aerospace and space, biomedical and automobile sectors, consisting of pure titanium at a minimum of 99 purity. Besides being lightweight, GR5 is separate from similar materials with its ability to resist corrosion at high levels and show high strength. SX steel is high silicon-content austenitic stainless steel with the ability of good quality of welding and excellent corrosion resistance in high concentration sulfuric acid and nitric acid. SX is used in areas such as acid coolers, acid piping systems, acid distributors, acid towers and tanks, pumps, nozzles, internals, strainers and mesh pads. With improving technology, the need for steel-titanium materials that are resisted to acid and made with welded joint is increasing. In this study, the effect of GR and SX materials of welding temperature on the connection is examined with diffusion welding method using copper intermediary layer. The material pairs are combined with a pressure of 5 MPa and a fixed welding time of 60 minutes in an argon gas environment in a silicon bar oven at the temperature of 980, 1000 and 1020C. The SEM-EDS-AFM analysis of the combined samples is performed, the metallographic structure of the intermediary layer in the diffusion-affected region is examined by the optical microscope, and the possible phases are tried to be determined by the XRD analysis. The micro stiffness values of the connection area are analyzed.

 GR5 Ti6Al4V is a material commonly used in aerospace and space, biomedical and automobile sectors, consisting of pure titanium at a minimum of 99 purity. Besides being lightweight, GR5 is separate from similar materials with its ability to resist corrosion at high levels and show high strength. SX steel is high silicon-content austenitic stainless steel with the ability of good quality of welding and excellent corrosion resistance in high concentration sulfuric acid and nitric acid. SX is used in areas such as acid coolers, acid piping systems, acid distributors, acid towers and tanks, pumps, nozzles, internals, strainers and mesh pads. With improving technology, the need for steel-titanium materials that are resisted to acid and made with welded joint is increasing. In this study, the effect of GR and SX materials of welding temperature on the connection is examined with diffusion welding method using copper intermediary layer. The material pairs are combined with a pressure of 5 MPa and a fixed welding time of 60 minutes in an argon gas environment in a silicon bar oven at the temperature of 980, 1000 and 1020C. The SEM-EDS-AFM analysis of the combined samples is performed, the metallographic structure of the intermediary layer in the diffusion-affected region is examined by the optical microscope, and the possible phases are tried to be determined by the XRD analysis. The micro stiffness values of the connection area are analyzed.

 GR5 Ti6Al4V is a material commonly used in aerospace and space, biomedical and automobile sectors, consisting of pure titanium at a minimum of 99 purity. Besides being lightweight, GR5 is separate from similar materials with its ability to resist corrosion at high levels and show high strength. SX steel is high silicon-content austenitic stainless steel with the ability of good quality of welding and excellent corrosion resistance in high concentration sulfuric acid and nitric acid. SX is used in areas such as acid coolers, acid piping systems, acid distributors, acid towers and tanks, pumps, nozzles, internals, strainers and mesh pads. With improving technology, the need for steel-titanium materials that are resisted to acid and made with welded joint is increasing. In this study, the effect of GR and SX materials of welding temperature on the connection is examined with diffusion welding method using copper intermediary layer. The material pairs are combined with a pressure of 5 MPa and a fixed welding time of 60 minutes in an argon gas environment in a silicon bar oven at the temperature of 980, 1000 and 1020C. The SEM-EDS-AFM analysis of the combined samples is performed, the metallographic structure of the intermediary layer in the diffusion-affected region is examined by the optical microscope, and the possible phases are tried to be determined by the XRD analysis. The micro stiffness values of the connection area are analyzed.

Makale detayları

COMBINATION OF COPPER INTERMEDIATE SX STEEL AND GR5 (Ti6Al4V) TITANIUM BY DIFFUSION WELDING METHOD

Yazarlar:

Jiyan Güney | Haluk Kejanlı

Yayıncı:

Dicle University

Dergi:

Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi Vol.14 Issue 2, pp.315-323

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001291724

pISSN:

1309-8640

SX Steel

Diffusion Welding

MicrohardnessGR5 (Ti6Al4V)

SX Çeliği

Difüzyon Kaynağı

SX Steel

Diffusion Welding

Microhardness

Sayı

Makale detayları

Yazarlar: Jiyan Güney | Haluk Kejanlı

Yayıncı: Dicle University

Dergi: Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi Vol.14 Issue 2, pp.315-323

Belge Tipi: Makale

Yayın Tarihi: 6/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001291724

pISSN: 1309-8640

Sayı

Yazarlar:

Jiyan Güney | Haluk Kejanlı

Yayıncı:

Dicle University

Dergi:

Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi Vol.14 Issue 2, pp.315-323

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001291724

pISSN:

1309-8640