A Comparative Study of Shear Bond Strength of Three Different Bracket Bases Bonded to Porcelain Surfaces

Göksu TRAKYALI; Gülden SINMAZIŞIK

Makale detayları

A Comparative Study of Shear Bond Strength of Three Different Bracket Bases Bonded to Porcelain Surfaces

Yazarlar:

Göksu TRAKYALI | Gülden SINMAZIŞIK

Yayıncı:

Marmara University

Dergi:

Marmara Dental Journal 2013 Vol.1 Issue 1, pp.24-28

Belge Tipi:

Makale

Yayın Tarihi:

7/2013

Belge Dili:

Türkçe

Document ID (Org No.):

2000425383

eISSN:

2630-6247

Özet:

 

Previous studies showed that the bonding strength of brackets to porcelain restorations and the failure model depend on many variables including bracket base design. The aim of this in-vitro study was to investigate Shear Bond Strength (SBS) of different bracket base designs on porcelain surfaces and to evaluate the sites of adhesive fracture with the Adhesive Remnant Index (ARI). Sixty feldspathic porcelain discs were randomly divided into three different groups each of twenty. Maxillary right incisor metal brackets with three different base designs (Victory series, 3M Unitek, Monrovia, California; Dyna-Lock, 3M Unitek, Monrovia, California and Mini Topic, Dentaurum, Inspringen, Germany) were bonded on the deglazed and conditioned porcelain surfaces in group 1, 2 and 3 respectively. Brackets were debonded and SBS was calculated in Mega Pascal (MPa). ARI scores were recorded after debonding. SBS forces calculated for group 1, 2 and 3 were 20,57 (± 7,18), 16,84 (± 6,20), 18,55 (± 5,46) MPa respectively. ANOVA and Multiple Comparison test revealed no significant difference in ARI scores between groups. Porcelain fractures after debonding were observed in groups 1 and 3. All brackets tested provided acceptable SBS. However, only Dyna-Lock brackets did not cause any porcelain fractures at debonding. This finding could be an acceptable reason to use this kind of brackets during orthodontic treatment of patient having porcelain restorations.

 


Previous studies showed that the bonding strength of bracketsto porcelain restorations and the failure model depend on manyvariables including bracket base design. The aim of this in-vitrostudy was to investigate Shear Bond Strength (SBS) of differentbracket base designs on porcelain surfaces and to evaluate thesites of adhesive fracture with the Adhesive Remnant Index (ARI).Sixty feldspathic porcelain discs were randomly divided into threedifferent groups each of twenty. Maxillary right incisor metalbrackets with three different base designs (Victory series, 3MUnitek, Monrovia, California; Dyna-Lock, 3M Unitek, Monrovia,California and Mini Topic, Dentaurum, Inspringen, Germany)were bonded on the deglazed and conditioned porcelain surfacesin group 1, 2 and 3 respectively. Brackets were debonded and SBSwas calculated in Mega Pascal (MPa). ARI scores were recorded afterdebonding. SBS forces calculated for group 1, 2 and 3 were 20,57 (±7,18), 16,84 (± 6,20), 18,55 (± 5,46) MPa respectively. ANOVA andMultiple Comparison test revealed no significant difference in ARIscores between groups. Porcelain fractures after debonding wereobserved in groups 1 and 3. All brackets tested provided acceptableSBS. However, only Dyna-Lock brackets did not cause any porcelainfractures at debonding. This finding could be an acceptable reasonto use this kind of brackets during orthodontic treatment of patienthaving porcelain restorations.

.

Makale detayları

A Comparative Study of Shear Bond Strength of Three Different Bracket Bases Bonded to Porcelain Surfaces

Yazarlar: Göksu TRAKYALI | Gülden SINMAZIŞIK

Yayıncı: Marmara University

Dergi: Marmara Dental Journal 2013 Vol.1 Issue 1, pp.24-28

Belge Tipi: Makale

Yayın Tarihi: 7/2013

Belge Dili: Türkçe

Document ID (Org No.): 2000425383

eISSN: 2630-6247

Sayı

Yazarlar:

Göksu TRAKYALI | Gülden SINMAZIŞIK

Yayıncı:

Marmara University

Dergi:

Marmara Dental Journal 2013 Vol.1 Issue 1, pp.24-28

Belge Tipi:

Makale

Yayın Tarihi:

7/2013

Belge Dili:

Türkçe

Document ID (Org No.):

2000425383

eISSN:

2630-6247