Effect of Acrylic/Polyester Fiber Addition on Mortar Mechanical and Insulation Properties

Hakan Sarıkaya; Murat Yatkın

Makale detayları

Effect of Acrylic/Polyester Fiber Addition on Mortar Mechanical and Insulation Properties

Yazarlar:

Hakan Sarıkaya | Murat Yatkın

Yayıncı:

Bingol University

Ana Başlıklar:

Yapı Malzemeleri

Dergi:

Bingöl Üniversitesi Teknik Bilimler Dergisi Vol.5 Issue 2, pp.43-57

Belge Tipi:

Makale

Yayın Tarihi:

12/2024

Belge Dili:

Türkçe

Document ID (Org No.):

2001334090

pISSN:

2757-6884

Anahtar kelimeler:

Özet:

 In this study, the compressive strength, flexural strength, thermal insulation, and microstructural properties of mortar samples containing an acrylicpolyester fiber mixture were analyzed. To this end, eight different mortar mixtures were prepared, incorporating 0, 0.5, 1, and 1.5 acrylicpolyester fiber mixture by weight. In four of the mortar mixtures, 100 cement was used as the binder material, while in the other four mixtures, fly ash was preferred as a substitute for cement at a rate of 50 by weight. The effects of all prepared mortar samples on both mechanical and insulation properties were investigated in detail. According to the experimental results, it was observed that as the fiber content ratio increased, the compressive strengths decreased, while the flexural strengths and insulation values increased.

 In this study, the compressive strength, flexural strength, thermal insulation, and microstructural properties of mortar samples containing an acrylicpolyester fiber mixture were analyzed. To this end, eight different mortar mixtures were prepared, incorporating 0, 0.5, 1, and 1.5 acrylicpolyester fiber mixture by weight. In four of the mortar mixtures, 100 cement was used as the binder material, while in the other four mixtures, fly ash was preferred as a substitute for cement at a rate of 50 by weight. The effects of all prepared mortar samples on both mechanical and insulation properties were investigated in detail. According to the experimental results, it was observed that as the fiber content ratio increased, the compressive strengths decreased, while the flexural strengths and insulation values increased.

 In this study, the compressive strength, flexural strength, thermal insulation, and microstructural properties of mortar samples containing an acrylicpolyester fiber mixture were analyzed. To this end, eight different mortar mixtures were prepared, incorporating 0, 0.5, 1, and 1.5 acrylicpolyester fiber mixture by weight. In four of the mortar mixtures, 100 cement was used as the binder material, while in the other four mixtures, fly ash was preferred as a substitute for cement at a rate of 50 by weight. The effects of all prepared mortar samples on both mechanical and insulation properties were investigated in detail. According to the experimental results, it was observed that as the fiber content ratio increased, the compressive strengths decreased, while the flexural strengths and insulation values increased.

 Bu çalışmada, akrilikpolyester lif karışımı içeren harç numunelerinin basınç dayanımı, eğilme dayanımı, ısı yalıtımı ve mikro yapı özellikleri analiz edilmiştir. Bu amaçla, harç numunelerine ağırlıkça 0, 0.5, 1 ve 1.5 akrilikpolyester lif karışımı içeren 8 farklı harç karışımları hazırlanmıştır. 4 farklı harç karışımında bağlayıcı malzeme içeriğinde 100 çimento kullanılırken, diğer 4 farklı karışımda ise bağlayıcı malzeme içeriğinde çimento yerine ağırlıkça 50 oranında da uçucu kül tercih edilmiştir. Hazırlanan tüm harç numunelerinin hem mekanik hem de yalıtım özellikleri üzerindeki etkileri ayrıntılı olarak araştırılmıştır. Deney sonuçlarına göre, lif katkı oranı arttıkça basınç dayanımlarının düştüğü, eğilme dayanımlarının ve yalıtım değerlerinin arttığı görülmüştür.

Makale detayları

Effect of Acrylic/Polyester Fiber Addition on Mortar Mechanical and Insulation Properties

Yazarlar:

Hakan Sarıkaya | Murat Yatkın

Yayıncı:

Bingol University

Ana Başlıklar:

Yapı Malzemeleri

Dergi:

Bingöl Üniversitesi Teknik Bilimler Dergisi Vol.5 Issue 2, pp.43-57

Belge Tipi:

Makale

Yayın Tarihi:

12/2024

Belge Dili:

Türkçe

Document ID (Org No.):

2001334090

pISSN:

2757-6884

Acrylic/Polyester fiber

Compressive strength

Flexural strengthAkrilik/Polyester lifi

Basınç dayanımı

Eğilme dayanımı

Sayı

Makale detayları

Effect of Acrylic/Polyester Fiber Addition on Mortar Mechanical and Insulation Properties

Yazarlar: Hakan Sarıkaya | Murat Yatkın

Yayıncı: Bingol University

Ana Başlıklar: Yapı Malzemeleri

Dergi: Bingöl Üniversitesi Teknik Bilimler Dergisi Vol.5 Issue 2, pp.43-57

Belge Tipi: Makale

Yayın Tarihi: 12/2024

Belge Dili: Türkçe

Document ID (Org No.): 2001334090

pISSN: 2757-6884

Acrylic/Polyester fiber

Compressive strength

Flexural strengthAkrilik/Polyester lifi

Basınç dayanımı

Eğilme dayanımı

Sayı

Yazarlar:

Hakan Sarıkaya | Murat Yatkın

Yayıncı:

Bingol University

Ana Başlıklar:

Yapı Malzemeleri

Dergi:

Bingöl Üniversitesi Teknik Bilimler Dergisi Vol.5 Issue 2, pp.43-57

Belge Tipi:

Makale

Yayın Tarihi:

12/2024

Belge Dili:

Türkçe

Document ID (Org No.):

2001334090

pISSN:

2757-6884