Correlation of fluid pressure and microdroplet size in a 3D-printed microfluidic chip

Mustafa Tahsin Guler

Makale detayları

Correlation of fluid pressure and microdroplet size in a 3D-printed microfluidic chip

Yazarlar:

Mustafa Tahsin Guler

Yayıncı:

Kirikkale University

Ana Başlıklar:

Mechanical Engineering

Dergi:

International Journal of Engineering Research and Development Vol.15 Issue 2, pp.610-614

Belge Tipi:

Makale

Yayın Tarihi:

7/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001284775

pISSN:

1308-5506

Anahtar kelimeler:

Özet:

 This paper reports the droplet formation performance of a 3D-printed microfluidic chip according to fluid pressure. SLA stereolithography 3D printer was employed for manufacturing the transparent microfluidic chip from resin. Water in oil microdroplets was produced on a flow-focusing design. Oil and water inlets were driven by a constant pressure source. The droplet production performance of the microfluidic chip was monitored through a microscope. The size of water droplets was determined according to pressure values.

 This paper reports the droplet formation performance of a 3D-printed microfluidic chip according to fluid pressure. SLA stereolithography 3D printer was employed for manufacturing the transparent microfluidic chip from resin. Water in oil microdroplets was produced on a flow-focusing design. Oil and water inlets were driven by a constant pressure source. The droplet production performance of the microfluidic chip was monitored through a microscope. The size of water droplets was determined according to pressure values.

 This paper reports the droplet formation performance of a 3D-printed microfluidic chip according to fluid pressure. SLA stereolithography 3D printer was employed for manufacturing the transparent microfluidic chip from resin. Water in oil microdroplets was produced on a flow-focusing design. Oil and water inlets were driven by a constant pressure source. The droplet production performance of the microfluidic chip was monitored through a microscope. The size of water droplets was determined according to pressure values.

 Bu makale 3B baskılanmış bir mikro kanalada damlacık oluşumunun sıvı basıncı ile olan ilişkisini inceler. SLA stereyolitografi 3B yazıcı ile reçineden şefff mikroakışkan çip imal edilmiştir. Yağ içinde su mikro damlacıkarı sıvı odaklama tasarımında oluşturulmuştur. Yağ ve su girişleri sabit basınç kayanağı ile sürülmüştür. Mikroakışkan çipin mikrodamlacık oluşturma başarımı mikroskop vasıtasıyla gözlenmiştir. Mikrodamlacıkların boyutları sıvı basıncına göre belirlenmiştir.

Makale detayları

Correlation of fluid pressure and microdroplet size in a 3D-printed microfluidic chip

Yazarlar:

Mustafa Tahsin Guler

Yayıncı:

Kirikkale University

Ana Başlıklar:

Mechanical Engineering

Dergi:

International Journal of Engineering Research and Development Vol.15 Issue 2, pp.610-614

Belge Tipi:

Makale

Yayın Tarihi:

7/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001284775

pISSN:

1308-5506

Microfluidic

microdroplet

3D-printing

mikroakışkanlar

3B baskı

mikrodamlacık

Sayı

Makale detayları

Correlation of fluid pressure and microdroplet size in a 3D-printed microfluidic chip

Yazarlar: Mustafa Tahsin Guler

Yayıncı: Kirikkale University

Ana Başlıklar: Mechanical Engineering

Dergi: International Journal of Engineering Research and Development Vol.15 Issue 2, pp.610-614

Belge Tipi: Makale

Yayın Tarihi: 7/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001284775

pISSN: 1308-5506

Microfluidic

microdroplet

3D-printing

mikroakışkanlar

3B baskı

mikrodamlacık

Sayı

Yazarlar:

Mustafa Tahsin Guler

Yayıncı:

Kirikkale University

Ana Başlıklar:

Mechanical Engineering

Dergi:

International Journal of Engineering Research and Development Vol.15 Issue 2, pp.610-614

Belge Tipi:

Makale

Yayın Tarihi:

7/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001284775

pISSN:

1308-5506