EFFECTS OF WIND SPEED AND MOUNTING TYPE ON PV MODULE IN UNBALANCED DISTRIBUTION SYSTEMS

Salman Ahmed Nur; Selcuk Emiroglu

Makale detayları

EFFECTS OF WIND SPEED AND MOUNTING TYPE ON PV MODULE IN UNBALANCED DISTRIBUTION SYSTEMS

Yazarlar:

Salman Ahmed Nur | Selcuk Emiroglu

Yayıncı:

Kütahya Dumlupinar University

Ana Başlıklar:

Engineering

Dergi:

Journal of Scientific Reports-A Issue 054, pp.94-107

Belge Tipi:

Makale

Yayın Tarihi:

9/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001293060

pISSN:

2687-6167

Anahtar kelimeler:

Özet:

 This paper assesses the effects of wind speed and mounting type on the performance of photovoltaic PV modules in the three phase unbalanced IEEE 34 node distribution system. The study was conducted in OpenDSS considering ZIP load model and residential load shape. The module temperature was calculated considering the wind speed and mounting type of the PV panel. The impact of wind speed on PV has been analyzed using three different wind data sets. Furthermore, free standing and flat roof mounting types were considered to evaluate the effect of mounting configuration. It was found that integrating PV into the distribution system reduced substation demand and energy losses. Results also show that the PV produced more power in high wind speed scenarios than in low wind speed scenarios. Regarding the mounting configuration, the PV incorporated with free standing configuration generated more power than the flat roof mounting type.

 This paper assesses the effects of wind speed and mounting type on the performance of photovoltaic PV modules in the three phase unbalanced IEEE 34 node distribution system. The study was conducted in OpenDSS considering ZIP load model and residential load shape. The module temperature was calculated considering the wind speed and mounting type of the PV panel. The impact of wind speed on PV has been analyzed using three different wind data sets. Furthermore, free standing and flat roof mounting types were considered to evaluate the effect of mounting configuration. It was found that integrating PV into the distribution system reduced substation demand and energy losses. Results also show that the PV produced more power in high wind speed scenarios than in low wind speed scenarios. Regarding the mounting configuration, the PV incorporated with free standing configuration generated more power than the flat roof mounting type.

 This paper assesses the effects of wind speed and mounting type on the performance of photovoltaic PV modules in the three phase unbalanced IEEE 34 node distribution system. The study was conducted in OpenDSS considering ZIP load model and residential load shape. The module temperature was calculated considering the wind speed and mounting type of the PV panel. The impact of wind speed on PV has been analyzed using three different wind data sets. Furthermore, free standing and flat roof mounting types were considered to evaluate the effect of mounting configuration. It was found that integrating PV into the distribution system reduced substation demand and energy losses. Results also show that the PV produced more power in high wind speed scenarios than in low wind speed scenarios. Regarding the mounting configuration, the PV incorporated with free standing configuration generated more power than the flat roof mounting type.

 This paper assesses the effects of wind speed and mounting type on the performance of photovoltaic PV modules in the three phase unbalanced IEEE 34 node distribution system. The study was conducted in OpenDSS considering ZIP load model and residential load shape. The module temperature was calculated considering the wind speed and mounting type of the PV panel. The impact of wind speed on PV has been analyzed using three different wind data sets. Furthermore, free standing and flat roof mounting types were considered to evaluate the effect of mounting configuration. It was found that integrating PV into the distribution system reduced substation demand and energy losses. Results also show that the PV produced more power in high wind speed scenarios than in low wind speed scenarios. Regarding the mounting configuration, the PV incorporated with free standing configuration generated more power than the flat roof mounting type.

Makale detayları

EFFECTS OF WIND SPEED AND MOUNTING TYPE ON PV MODULE IN UNBALANCED DISTRIBUTION SYSTEMS

Yazarlar:

Salman Ahmed Nur | Selcuk Emiroglu

Yayıncı:

Kütahya Dumlupinar University

Ana Başlıklar:

Engineering

Dergi:

Journal of Scientific Reports-A Issue 054, pp.94-107

Belge Tipi:

Makale

Yayın Tarihi:

9/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001293060

pISSN:

2687-6167

Photovoltaic Systems

Wind Speed

Mounting Type

Ambient Temperature

Unbalanced Distribution System

Sayı

Makale detayları

EFFECTS OF WIND SPEED AND MOUNTING TYPE ON PV MODULE IN UNBALANCED DISTRIBUTION SYSTEMS

Yazarlar: Salman Ahmed Nur | Selcuk Emiroglu

Yayıncı: Kütahya Dumlupinar University

Ana Başlıklar: Engineering

Dergi: Journal of Scientific Reports-A Issue 054, pp.94-107

Belge Tipi: Makale

Yayın Tarihi: 9/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001293060

pISSN: 2687-6167

Photovoltaic Systems

Wind Speed

Mounting Type

Ambient Temperature

Unbalanced Distribution System

Sayı

Yazarlar:

Salman Ahmed Nur | Selcuk Emiroglu

Yayıncı:

Kütahya Dumlupinar University

Ana Başlıklar:

Engineering

Dergi:

Journal of Scientific Reports-A Issue 054, pp.94-107

Belge Tipi:

Makale

Yayın Tarihi:

9/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001293060

pISSN:

2687-6167