SURFACE QUALITY COMPARISON BETWEEN TRADITIONAL AND ONE STEP PRODUCTION CYCLE

Sevil DEMİRCİ; Semih ERTÜRK; Uğur ÜZEL

doi:https://doi.org/10.34186/klujes.626588

Makale detayları

SURFACE QUALITY COMPARISON BETWEEN TRADITIONAL AND ONE STEP PRODUCTION CYCLE

Yazarlar:

Sevil DEMİRCİ | Semih ERTÜRK | Uğur ÜZEL

Yayıncı:

Kirklareli University

Ana Başlıklar:

Uygulamalı fizik

Dergi:

Kirklareli University Journal of Engineering and Science 2019 Vol.5 Issue 2, pp.210-221

Belge Tipi:

Makale

Yayın Tarihi:

12/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000526049

Sıklık:

İki Yıllık

eISSN:

2458-7613

pISSN:

2458-7494

DOI:

https://doi.org/10.34186/klujes.626588

Özet:

 



Surface quality behaviour was investigated for one step production
system compared to traditional painting process. This study was conducted to
compare and analyse the effect of one step production cycle on surface quality
when compared with traditional production system. Sample plates were prepared
by traditional painting process with acrylic solvent based paint and one step
production cycle with polyurethane (PU) coating systems. Surface quality of
plates were analysed regarding scratch resistance, thermal aging resistance and
orange peeling formation. Test methods were determined according to Fiat
painted plastic part qualification norms. Test results revealed that gloss
loss, roughness values and orange peeling formation affinity were less for one
step production system with PU than conventional system with solvent based
acrylic paint. This study contributes to revealing surface quality performance
for the methods of producing painted parts that are more resistant to scratch,
thermal conditions and having much fewer surface defects like orange peeling. 




.

 


Surface
quality behaviour was investigated for one step production system compared to
traditional painting process. This study was conducted to compare and analyse
the effect of one step production cycle on surface quality when compared with
traditional production system. Sample plates were prepared by traditional
painting process with acrylic solvent based paint and one step production cycle
with polyurethane (PU) coating systems. Surface quality of plates were analysed
regarding scratch resistance, thermal aging resistance and orange peeling
formation. Test methods were determined according to Fiat painted plastic part
qualification norms. Test results revealed that gloss loss, roughness values
and orange peeling formation affinity were less for one step production system
with PU than conventional system with solvent based acrylic paint. This study
contributes to revealing surface quality performance for the methods of
producing painted parts that are more resistant to scratch, thermal conditions
and having much fewer surface defects like orange peeling.

.

Makale detayları

SURFACE QUALITY COMPARISON BETWEEN TRADITIONAL AND ONE STEP PRODUCTION CYCLE

Yazarlar: Sevil DEMİRCİ | Semih ERTÜRK | Uğur ÜZEL

Yayıncı: Kirklareli University

Ana Başlıklar: Uygulamalı fizik

Dergi: Kirklareli University Journal of Engineering and Science 2019 Vol.5 Issue 2, pp.210-221

Belge Tipi: Makale

Yayın Tarihi: 12/2019

Belge Dili: İngilizce

Document ID (Org No.): 2000526049

Sıklık: İki Yıllık

eISSN: 2458-7613

pISSN: 2458-7494

DOI: https://doi.org/10.34186/klujes.626588

Sayı

Yazarlar:

Sevil DEMİRCİ | Semih ERTÜRK | Uğur ÜZEL

Yayıncı:

Kirklareli University

Ana Başlıklar:

Uygulamalı fizik

Dergi:

Kirklareli University Journal of Engineering and Science 2019 Vol.5 Issue 2, pp.210-221

Belge Tipi:

Makale

Yayın Tarihi:

12/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000526049

Sıklık:

İki Yıllık

eISSN:

2458-7613

pISSN:

2458-7494

DOI:

https://doi.org/10.34186/klujes.626588