Incremental Forming of Titanium Grade 2 Sheet by TPIF-RL Method

Ömer SEÇGİN; Ergün NART; İbrahim ÖZSERT

doi:https://doi.org/10.30939/ijastech..999466

Makale detayları

Incremental Forming of Titanium Grade 2 Sheet by TPIF-RL Method

Yazarlar:

Ömer SEÇGİN | Ergün NART | İbrahim ÖZSERT

Yayıncı:

Otomotiv Mühendisleri Derneği

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

International Journal of Automotive Science And Technology 2021 Vol.5 Issue 4, pp.386-389

Belge Tipi:

Makale

Yayın Tarihi:

12/2021

Belge Dili:

İngilizce

Document ID (Org No.):

2000718820

Sıklık:

Üç Aylık

eISSN:

2587-0963

DOI:

https://doi.org/10.30939/ijastech..999466

Özet:

 

TPIF-RL method is a new method that gives better wall thickness in incremental forming. In this method, the sheet is not fixed at the edges. Like the deep drawing process, it is compressed with a certain pressure. During the forming process, the sheet flows under the blankholder. Thus, more homogenous wall thickness is ob-tained.In this study, Titanium Grade 2 sheet is formed as a cone via TPIF-RL method. Optimum forming parameters were determined by Signal/Noise analysis. In addi-tion, finite element analysis of the process was performed. Using 2 bar clamping pressure, 1000 mm/min feedrate, 0.75 mm increment and 15 mm forming tool di-ameter optimum result was obtained. With these optimum parameters, 6% thin-ning occurs on sheet thickness. This new method ensures a homogeneous wall thickness distribution. .

Makale detayları

Incremental Forming of Titanium Grade 2 Sheet by TPIF-RL Method

Yazarlar: Ömer SEÇGİN | Ergün NART | İbrahim ÖZSERT

Yayıncı: Otomotiv Mühendisleri Derneği

Ana Başlıklar: Diğer mühendislik dalları

Dergi: International Journal of Automotive Science And Technology 2021 Vol.5 Issue 4, pp.386-389

Belge Tipi: Makale

Yayın Tarihi: 12/2021

Belge Dili: İngilizce

Document ID (Org No.): 2000718820

Sıklık: Üç Aylık

eISSN: 2587-0963

DOI: https://doi.org/10.30939/ijastech..999466

Sayı

Yazarlar:

Ömer SEÇGİN | Ergün NART | İbrahim ÖZSERT

Yayıncı:

Otomotiv Mühendisleri Derneği

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

International Journal of Automotive Science And Technology 2021 Vol.5 Issue 4, pp.386-389

Belge Tipi:

Makale

Yayın Tarihi:

12/2021

Belge Dili:

İngilizce

Document ID (Org No.):

2000718820

Sıklık:

Üç Aylık

eISSN:

2587-0963

DOI:

https://doi.org/10.30939/ijastech..999466