FABRICATION AND PROPERTIES OF FeCrC REINFORCED COPPER ALLOYS BY MECHANICAL ALLOYING

Tanju Teker; Serdar Osman Yılmaz

Makale detayları

FABRICATION AND PROPERTIES OF FeCrC REINFORCED COPPER ALLOYS BY MECHANICAL ALLOYING

Yazarlar:

Tanju Teker | Serdar Osman Yılmaz

Yayıncı:

Adıyaman University

Ana Başlıklar:

Mühendislik

Dergi:

Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi Vol.10 Issue 20, pp.135-140

Belge Tipi:

Makale

Yayın Tarihi:

8/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001297864

pISSN:

2149-0309

Anahtar kelimeler:

Özet:

 In this study, properties and fabrication of FeCrC reinforced copper alloys by mechanical alloying were examined using mechanical grinding, optical microscopy, energy dispersive spectroscope, X-ray diffraction, and hardness testing. MA had a very good ability to mix Cu-FeCrC particles. High FeCrC provided more cold work during milling. Thus, smaller crystallite size and greater internal stress occurred in Cu alloys. High performance Cu was further strengthened by a combination of fine grain and alloying. C23C6, Cr7C3 and αCu detected in the structure. The hardness of Cu increased significantly after grinding with FeCrC.

 In this study, properties and fabrication of FeCrC reinforced copper alloys by mechanical alloying were examined using mechanical grinding, optical microscopy, energy dispersive spectroscope, X-ray diffraction, and hardness testing. MA had a very good ability to mix Cu-FeCrC particles. High FeCrC provided more cold work during milling. Thus, smaller crystallite size and greater internal stress occurred in Cu alloys. High performance Cu was further strengthened by a combination of fine grain and alloying. C23C6, Cr7C3 and αCu detected in the structure. The hardness of Cu increased significantly after grinding with FeCrC.

 In this study, properties and fabrication of FeCrC reinforced copper alloys by mechanical alloying were examined using mechanical grinding, optical microscopy, energy dispersive spectroscope, X-ray diffraction, and hardness testing. MA had a very good ability to mix Cu-FeCrC particles. High FeCrC provided more cold work during milling. Thus, smaller crystallite size and greater internal stress occurred in Cu alloys. High performance Cu was further strengthened by a combination of fine grain and alloying. C23C6, Cr7C3 and αCu detected in the structure. The hardness of Cu increased significantly after grinding with FeCrC.

 In this study, properties and fabrication of FeCrC reinforced copper alloys by mechanical alloying were examined using mechanical grinding, optical microscopy, energy dispersive spectroscope, X-ray diffraction, and hardness testing. MA had a very good ability to mix Cu-FeCrC particles. High FeCrC provided more cold work during milling. Thus, smaller crystallite size and greater internal stress occurred in Cu alloys. High performance Cu was further strengthened by a combination of fine grain and alloying. C23C6, Cr7C3 and αCu detected in the structure. The hardness of Cu increased significantly after grinding with FeCrC.

Makale detayları

FABRICATION AND PROPERTIES OF FeCrC REINFORCED COPPER ALLOYS BY MECHANICAL ALLOYING

Yazarlar:

Tanju Teker | Serdar Osman Yılmaz

Yayıncı:

Adıyaman University

Ana Başlıklar:

Mühendislik

Dergi:

Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi Vol.10 Issue 20, pp.135-140

Belge Tipi:

Makale

Yayın Tarihi:

8/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001297864

pISSN:

2149-0309

Mechanical alloying

Cu matrix alloy

morphology

hardnessMechanical alloying

Cu matrix alloy

morphology

hardness

Sayı

Makale detayları

Yazarlar: Tanju Teker | Serdar Osman Yılmaz

Yayıncı: Adıyaman University

Ana Başlıklar: Mühendislik

Dergi: Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi Vol.10 Issue 20, pp.135-140

Belge Tipi: Makale

Yayın Tarihi: 8/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001297864

pISSN: 2149-0309

Sayı

Yazarlar:

Tanju Teker | Serdar Osman Yılmaz

Yayıncı:

Adıyaman University

Ana Başlıklar:

Mühendislik

Dergi:

Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi Vol.10 Issue 20, pp.135-140

Belge Tipi:

Makale

Yayın Tarihi:

8/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001297864

pISSN:

2149-0309