Investigation of stress occurring on fixation systems and mandibular bone in fixation of mandible symphysis fractures with different plate systems

Fatma Eriş Derkuş; Utku Nezih Yılmaz

Makale detayları

Investigation of stress occurring on fixation systems and mandibular bone in fixation of mandible symphysis fractures with different plate systems

Yazarlar:

Fatma Eriş Derkuş | Utku Nezih Yılmaz

Yayıncı:

Dicle University

Ana Başlıklar:

Oral and Maxillofacial Surgery

Dergi:

Dicle Dental Journal Vol.25 Issue 1, pp.1-5

Belge Tipi:

Makale

Yayın Tarihi:

3/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001314446

pISSN:

2822-6755

Anahtar kelimeler:

Özet:

 Aims: The aim of this study is to investigate the effectiveness of CFR-PEEK plates by comparing titanium plates with CFR-PEEK plates in the fixation of mandibular symphysis fractures. Methods: In the study, a model that imitates the mandible was obtained with the finite element analysis method. A fracture line was created in the symphysis on the model, and a double mini-plate was applied to this line with the Champy method. Comparisons were made by assigning CFR-PEEK and titanium material properties to the plates. Results: Von Mises stresses on screws and plates were found to be lower than those on titanium plates when CFR-PEEK plates were applied. When the stresses in the screws were examined, it was observed that the highest stresses occurred in the screws adjacent to the fracture line. Conclusion: CFR-PEEK materials provide a more stable fixation by reducing the stresses in the fixation systems and may be a good alternative to titanium materials with their advantageous properties.

 Aims: The aim of this study is to investigate the effectiveness of CFR-PEEK plates by comparing titanium plates with CFR-PEEK plates in the fixation of mandibular symphysis fractures. Methods: In the study, a model that imitates the mandible was obtained with the finite element analysis method. A fracture line was created in the symphysis on the model, and a double mini-plate was applied to this line with the Champy method. Comparisons were made by assigning CFR-PEEK and titanium material properties to the plates. Results: Von Mises stresses on screws and plates were found to be lower than those on titanium plates when CFR-PEEK plates were applied. When the stresses in the screws were examined, it was observed that the highest stresses occurred in the screws adjacent to the fracture line. Conclusion: CFR-PEEK materials provide a more stable fixation by reducing the stresses in the fixation systems and may be a good alternative to titanium materials with their advantageous properties.

 Aims: The aim of this study is to investigate the effectiveness of CFR-PEEK plates by comparing titanium plates with CFR-PEEK plates in the fixation of mandibular symphysis fractures. Methods: In the study, a model that imitates the mandible was obtained with the finite element analysis method. A fracture line was created in the symphysis on the model, and a double mini-plate was applied to this line with the Champy method. Comparisons were made by assigning CFR-PEEK and titanium material properties to the plates. Results: Von Mises stresses on screws and plates were found to be lower than those on titanium plates when CFR-PEEK plates were applied. When the stresses in the screws were examined, it was observed that the highest stresses occurred in the screws adjacent to the fracture line. Conclusion: CFR-PEEK materials provide a more stable fixation by reducing the stresses in the fixation systems and may be a good alternative to titanium materials with their advantageous properties.

 Aims: The aim of this study is to investigate the effectiveness of CFR-PEEK plates by comparing titanium plates with CFR-PEEK plates in the fixation of mandibular symphysis fractures. Methods: In the study, a model that imitates the mandible was obtained with the finite element analysis method. A fracture line was created in the symphysis on the model, and a double mini-plate was applied to this line with the Champy method. Comparisons were made by assigning CFR-PEEK and titanium material properties to the plates. Results: Von Mises stresses on screws and plates were found to be lower than those on titanium plates when CFR-PEEK plates were applied. When the stresses in the screws were examined, it was observed that the highest stresses occurred in the screws adjacent to the fracture line. Conclusion: CFR-PEEK materials provide a more stable fixation by reducing the stresses in the fixation systems and may be a good alternative to titanium materials with their advantageous properties.

Makale detayları

Investigation of stress occurring on fixation systems and mandibular bone in fixation of mandible symphysis fractures with different plate systems

Yazarlar:

Fatma Eriş Derkuş | Utku Nezih Yılmaz

Yayıncı:

Dicle University

Ana Başlıklar:

Oral and Maxillofacial Surgery

Dergi:

Dicle Dental Journal Vol.25 Issue 1, pp.1-5

Belge Tipi:

Makale

Yayın Tarihi:

3/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001314446

pISSN:

2822-6755

mandible fractures

CFR-PEEK plate

titanium plate

finite element analysis

Sayı

Makale detayları

Investigation of stress occurring on fixation systems and mandibular bone in fixation of mandible symphysis fractures with different plate systems

Yazarlar: Fatma Eriş Derkuş | Utku Nezih Yılmaz

Yayıncı: Dicle University

Ana Başlıklar: Oral and Maxillofacial Surgery

Dergi: Dicle Dental Journal Vol.25 Issue 1, pp.1-5

Belge Tipi: Makale

Yayın Tarihi: 3/2024

Belge Dili: İngilizce

Document ID (Org No.): 2001314446

pISSN: 2822-6755

mandible fractures

CFR-PEEK plate

titanium plate

finite element analysis

Sayı

Yazarlar:

Fatma Eriş Derkuş | Utku Nezih Yılmaz

Yayıncı:

Dicle University

Ana Başlıklar:

Oral and Maxillofacial Surgery

Dergi:

Dicle Dental Journal Vol.25 Issue 1, pp.1-5

Belge Tipi:

Makale

Yayın Tarihi:

3/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001314446

pISSN:

2822-6755