An Investigation of Stainless Steel  316L  Material Produced with Different Powder Injection Pressure Systems

Yunus TUREN

doi:https://doi.org/10.17350/HJSE19030000053

Makale detayları

An Investigation of Stainless Steel 316L Material Produced with Different Powder Injection Pressure Systems

Yazarlar:

Yunus TUREN

Yayıncı:

Hitit University

Dergi:

Hittite Journal of Science and Engineering 2017 Vol.4 Issue 2, pp.85-90

Belge Tipi:

Makale

Yayın Tarihi:

12/2017

Belge Dili:

İngilizce

Document ID (Org No.):

2000451780

Sıklık:

Üç Aylık

eISSN:

2148-4171

DOI:

https://doi.org/10.17350/HJSE19030000053

Özet:

 

I n this study, influence of hydrolic pressure or gas pressure on the powder injection molding of 316L stainless steel was investigated. Variations in the microstructure, hardness and density of the porduced samples were discussed in the frame of presure type. In the injection molding applied molding pressure, ratio of powder/binder, binder leacing time, sintering temperature also were examined. Experimental works showed that the gas pressure system was observed to be more effective than hydrolic pressure system for each parameters. Experimental results also showed that the powder ratio in the feedstock and sintering temperature had dominant effect on hardness and microstructure of the samples. The leaching time of Polyethylene Glycol  PEG  600 binder has been decreased with increasing molding pressure. Increasing hardness and density of samples were achieved by increasing metal powder ratio. The increasing in hardness and density were also observed by increasing sintering temperature.

Makale detayları

An Investigation of Stainless Steel 316L Material Produced with Different Powder Injection Pressure Systems

Yazarlar: Yunus TUREN

Yayıncı: Hitit University

Dergi: Hittite Journal of Science and Engineering 2017 Vol.4 Issue 2, pp.85-90

Belge Tipi: Makale

Yayın Tarihi: 12/2017

Belge Dili: İngilizce

Document ID (Org No.): 2000451780

Sıklık: Üç Aylık

eISSN: 2148-4171

DOI: https://doi.org/10.17350/HJSE19030000053

Sayı

Yazarlar:

Yunus TUREN

Yayıncı:

Hitit University

Dergi:

Hittite Journal of Science and Engineering 2017 Vol.4 Issue 2, pp.85-90

Belge Tipi:

Makale

Yayın Tarihi:

12/2017

Belge Dili:

İngilizce

Document ID (Org No.):

2000451780

Sıklık:

Üç Aylık

eISSN:

2148-4171

DOI:

https://doi.org/10.17350/HJSE19030000053