Determination of the Optimum Feed Rate and Spindle Speed Depending on the Surface Roughness of Some Wood Species Processed with CNC Machine

Evren Osman ÇAKIROĞLU; Aydın DEMİR; İsmail AYDIN

doi:https://doi.org/10.35229/jaes.635310

Makale detayları

Determination of the Optimum Feed Rate and Spindle Speed Depending on the Surface Roughness of Some Wood Species Processed with CNC Machine

Yazarlar:

Evren Osman ÇAKIROĞLU | Aydın DEMİR | İsmail AYDIN

Yayıncı:

Bülent VEREP

Dergi:

Journal of Anatolian Environmental and Animal Sciences 2019 Vol.4 Issue 4, pp.598-601

Belge Tipi:

Makale

Yayın Tarihi:

12/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000490679

Sıklık:

Üç Aylık

eISSN:

2548-0006

DOI:

https://doi.org/10.35229/jaes.635310

Özet:

 

In modern furniture
industry, CNC machines are widely used, especially when high quality of product
and flexibility of manufacturing process are expected. Even though there are
many advanced computer-aided manufacturing systems for furniture producers, it
is difficult to set process parameters according to obtain desired material
surface properties because wood is a natural polymeric material with a
heterogeneous structure. Wood surface properties are affected both material and
machining factors, such as wood species, anatomical characteristics, moisture
content, grain direction, feed rate, spindle speed, cutting depth, and tool
geometry. In this study, it was aimed to determine of the optimum feed rate and
spindle speed depending on the surface roughness of some wood species processed
with CNC machine. Spruce, chestnut, larch and iroko were used as wood species.
Three spindle speed (10000, 14000 and 18000 rpm) and feed rate (5000, 7000 and
9000 mm/min) were determined for CNC processing. The surface roughness (Rz) of
wood samples were determined according to DIN 4768 standard. As a result of the
study, the lowest surface roughness values were found in 10000 rpm spindle
speed and 5000 mm/min feed rate for spruce and chestnut wood and 18000 rpm
spindle speed and 7000 mm/min feed rate for larch and iroko wood. The highest
values in the all of wood species were obtain from 10000 rpm spindle speed and
9000 mm/min feed rate.

Makale detayları

Determination of the Optimum Feed Rate and Spindle Speed Depending on the Surface Roughness of Some Wood Species Processed with CNC Machine

Yazarlar: Evren Osman ÇAKIROĞLU | Aydın DEMİR | İsmail AYDIN

Yayıncı: Bülent VEREP

Dergi: Journal of Anatolian Environmental and Animal Sciences 2019 Vol.4 Issue 4, pp.598-601

Belge Tipi: Makale

Yayın Tarihi: 12/2019

Belge Dili: İngilizce

Document ID (Org No.): 2000490679

Sıklık: Üç Aylık

eISSN: 2548-0006

DOI: https://doi.org/10.35229/jaes.635310

Sayı

Yazarlar:

Evren Osman ÇAKIROĞLU | Aydın DEMİR | İsmail AYDIN

Yayıncı:

Bülent VEREP

Dergi:

Journal of Anatolian Environmental and Animal Sciences 2019 Vol.4 Issue 4, pp.598-601

Belge Tipi:

Makale

Yayın Tarihi:

12/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000490679

Sıklık:

Üç Aylık

eISSN:

2548-0006

DOI:

https://doi.org/10.35229/jaes.635310