Brake Pad Production and Braking Characteristics Analysis for Military Vehicles

İlker Sugözü

Makale detayları

Brake Pad Production and Braking Characteristics Analysis for Military Vehicles

Yazarlar:

İlker Sugözü

Yayıncı:

Artvin Çoruh University

Ana Başlıklar:

Malzeme Tasarım ve Davranışları | Triboloji

Dergi:

Artvin Çoruh Üniversitesi Mühendislik ve Fen Bilimleri Dergisi Vol.1 Issue 2, pp.115-123

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001307418

pISSN:

2980-3705

Anahtar kelimeler:

Özet:

 In this study, the production of brake pads suitable for special conditions for military vehicles and the examination of the braking characteristics of these pads were carried out. In addition, it is intended to create an ideal braking system for military tanks with special operating conditions. In this direction, pad formulation studies were carried out for use in military tanks and the performance of brake pads produced by hot pressing method was evaluated with Chase and Dynamometer tests. Additionally, the pad properties were examined in detail with chemical tests before and after the baking process. As a result of the tests, it has been determined that the brake pad, which is a critical component for the safety and effectiveness of military vehicles, is included in the F group pad standard. The results obtained enabled the changes in the properties of the pad material and the braking performance of the pad to be determined.

 In this study, the production of brake pads suitable for special conditions for military vehicles and the examination of the braking characteristics of these pads were carried out. In addition, it is intended to create an ideal braking system for military tanks with special operating conditions. In this direction, pad formulation studies were carried out for use in military tanks and the performance of brake pads produced by hot pressing method was evaluated with Chase and Dynamometer tests. Additionally, the pad properties were examined in detail with chemical tests before and after the baking process. As a result of the tests, it has been determined that the brake pad, which is a critical component for the safety and effectiveness of military vehicles, is included in the F group pad standard. The results obtained enabled the changes in the properties of the pad material and the braking performance of the pad to be determined.

 In this study, the production of brake pads suitable for special conditions for military vehicles and the examination of the braking characteristics of these pads were carried out. In addition, it is intended to create an ideal braking system for military tanks with special operating conditions. In this direction, pad formulation studies were carried out for use in military tanks and the performance of brake pads produced by hot pressing method was evaluated with Chase and Dynamometer tests. Additionally, the pad properties were examined in detail with chemical tests before and after the baking process. As a result of the tests, it has been determined that the brake pad, which is a critical component for the safety and effectiveness of military vehicles, is included in the F group pad standard. The results obtained enabled the changes in the properties of the pad material and the braking performance of the pad to be determined.

 Bu çalışmada, askeri araçlar için özel koşullara uygun fren balatası üretimi ve bu balataların frenleme karakteristiklerinin incelenmesi gerçekleştirilmiştir. Ek olarak, özel çalışma koşullarına sahip askeri tanklar için ideal bir frenleme sistemi oluşturmak amaçlanmıştır. Bu doğrultuda, askeri tanklarda kullanılmak üzere balata formülasyon çalışmaları gerçekleştirilmiş ve sıcak basım yöntemiyle üretilen fren balatalarının performansı Chase ve Dinamometre testleriyle değerlendirilmiştir. Ayrıca, fırınlama işlemi öncesi ve sonrasında kimyasal testlerle balata özellikleri detaylı bir şekilde incelenmiştir. Askeri araçların güvenliği ve etkinliği için kritik bir bileşen olan fren balatasının yapılan testler sonucu F grubu balata standardında yer aldığı belirlenmiştir. Elde edilen sonuçlar, balata malzemesinin özelliklerindeki değişimleri ve balatanın frenleme performansının belirlenmesini sağlamıştır.

Makale detayları

Brake Pad Production and Braking Characteristics Analysis for Military Vehicles

Yazarlar:

İlker Sugözü

Yayıncı:

Artvin Çoruh University

Ana Başlıklar:

Malzeme Tasarım ve Davranışları | Triboloji

Dergi:

Artvin Çoruh Üniversitesi Mühendislik ve Fen Bilimleri Dergisi Vol.1 Issue 2, pp.115-123

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001307418

pISSN:

2980-3705

Dynamometer test

Production of brake pad

Tank brake padsDinamometre testi

Fren balata üretimi

Tank balataları

Sayı

Makale detayları

Brake Pad Production and Braking Characteristics Analysis for Military Vehicles

Yazarlar: İlker Sugözü

Yayıncı: Artvin Çoruh University

Ana Başlıklar: Malzeme Tasarım ve Davranışları | Triboloji

Dergi: Artvin Çoruh Üniversitesi Mühendislik ve Fen Bilimleri Dergisi Vol.1 Issue 2, pp.115-123

Belge Tipi: Makale

Yayın Tarihi: 12/2023

Belge Dili: Türkçe

Document ID (Org No.): 2001307418

pISSN: 2980-3705

Dynamometer test

Production of brake pad

Tank brake padsDinamometre testi

Fren balata üretimi

Tank balataları

Sayı

Yazarlar:

İlker Sugözü

Yayıncı:

Artvin Çoruh University

Ana Başlıklar:

Malzeme Tasarım ve Davranışları | Triboloji

Dergi:

Artvin Çoruh Üniversitesi Mühendislik ve Fen Bilimleri Dergisi Vol.1 Issue 2, pp.115-123

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001307418

pISSN:

2980-3705